Manwali+

Linja Bażi 12-0023

Baseline Analog/Digital Pinch Gauge Instruction Manual

Mudell: 12-0023

1. Introduzzjoni

This instruction manual provides essential information for the safe and effective use, setup, operation, and maintenance of your Baseline Analog/Digital Pinch Gauge, Model 12-0023. This device is designed for accurately measuring pinch strength in various clinical and research settings. Please read this manual thoroughly before using the device.

2. Prodott Aktarview

The Baseline Analog/Digital Pinch Gauge is a stand-alone dynamometer engineered for precision. It features a transducer that generates an electrical signal, allowing for data to be read into a compatible computer system for detailed analysis. The device is constructed with latex-free materials, ensuring suitability for a wide range of users.

Baseline Analog/Digital Pinch Gauge with a circular dial and a pinch mechanism

Figura 1: The Baseline Analog/Digital Pinch Gauge. This image displays the circular gauge face with measurements in pounds and kilograms, and the attached pinch mechanism.

3. Setup

  1. Spakkjar: Carefully remove the pinch gauge from its packaging. Inspect the device for any visible damage that may have occurred during shipping.
  2. Tindif Inizjali: Before first use, wipe the device with a soft, damp cloth. Ensure it is dry before operation.
  3. Ebda Assemblea Meħtieġa: This unit is designed as a stand-alone device and typically requires no assembly.
  4. Digital Connection (if applicable): If utilizing the digital output feature, connect the transducer cable to a compatible computer or data acquisition system as per the system's instructions.

4. Istruzzjonijiet Operattivi

Follow these steps for accurate pinch strength measurement:

  1. Pożizzjonament: Hold the pinch gauge comfortably in your hand, ensuring a stable grip.
  2. Finger Placement: Position your fingers (typically thumb and index finger, or other combinations as required by the test protocol) on the designated pinch pads of the device.
  3. Applikazzjoni tal-Forza: Apply a steady, maximum pinch force. The gauge will register the measurement.
  4. Reading Measurement: Read the measurement directly from the analog dial in either pounds (LBS) or kilograms (KGS). For digital models, the reading will be transmitted to the connected computer system.
  5. Reġistrazzjoni tad-Dejta: Record the measurement accurately. For digital systems, ensure data logging is active.
  6. Ripetizzjonijiet: If multiple measurements are required, allow for adequate rest between trials as per clinical guidelines.

Always refer to established clinical protocols for specific testing procedures and interpretation of results.

5. Manutenzjoni

  • Tindif: Clean the exterior of the device with a soft, lint-free cloth dampened with mild soap and water. Do not use abrasive cleaners or immerse the device in any liquid.
  • Ħażna: Store the pinch gauge in a dry, cool environment, away from direct sunlight and extreme temperatures. Keep it in its original case or a protective container when not in use.
  • Spezzjoni: Periodically inspect the device for any signs of wear, damage, or loose components. If any damage is observed, discontinue use and contact customer support.
  • Kalibrazzjoni: To ensure continued accuracy, periodic calibration by a qualified technician is recommended. The frequency of calibration may depend on usage and institutional policies.

6 Issolvi l-problemi

  • Qari mhux eżatt:
    • Ensure proper technique is being used.
    • Verify the device has been calibrated recently.
    • Check for any physical obstructions or damage to the pinch mechanism.
  • No Reading (Digital Models):
    • Confirm that the transducer cable is securely connected to both the gauge and the computer.
    • Check the power supply and software settings of the connected computer system.
  • Ħsara Fiżika: If the device appears physically damaged, discontinue use immediately and contact Baseline customer support for repair or replacement options.

7. Speċifikazzjonijiet

  • Numru tal-Mudell: 12-0023
  • Manifattur: Linja bażi
  • Dimensjonijiet tal-Prodott: 8 x 7 x 5 pulzieri
  • Piż tal-oġġett: 1 Lira
  • ASIN: B00BRCGMA2
  • Materjal: Latex-free components
  • Unitajiet tal-Kejl: Pounds (LBS) and Kilograms (KGS)

8. Garanzija u Appoġġ

For detailed warranty information, technical assistance, or to inquire about service and repairs, please contact Baseline customer service. It is recommended to retain your purchase receipt as proof of purchase for any warranty claims.

Tipikament tista' ssib informazzjoni ta' kuntatt fuq is-sit uffiċjali tal-manifattur webis-sit jew permezz tan-negozjant awtorizzat tiegħek.

Dokumenti Relatati - 12-0023

Preview Istruzzjonijiet u Speċifikazzjonijiet tal-Użu tal-Gauge Elettroniku tal-Pinchline Baseline
Istruzzjonijiet komprensivi għat-tħaddim, proċeduri ta' ttestjar, u speċifikazzjonijiet għall-Baseline Electronic Pinch Gauge (Mudell 12-0475) minn Fabrication Enterprises, użat għall-kejl tas-saħħa tal-pinch.
Preview Manwal tal-Utent tad-Dinamometru Diġitali tal-Qabda u l-Pinch tal-Baseline BIMS
Manwal komprensiv għall-utent għad-dinamometri diġitali tal-qabda u tal-pinch Baseline BIMS, li jiddeskrivi l-karatteristiċi, it-tħaddim, il-protokolli tal-ittestjar, il-kalibrazzjoni, u d-dejta normattiva għas-saħħa tal-qabda u tal-pinch.
Preview Dinamometru tal-polz idrawliku tal-linja bażi: Manwal tal-istruzzjoni u informazzjoni dwar il-prodott
Istruzzjonijiet dettaljati u informazzjoni dwar il-prodott għad-Dinamometru tal-Polz Idrawliku Baseline, inkluż l-użu, il-kalibrazzjoni, il-garanzija, u l-installazzjoni tal-manku minn Fabrication Enterprises, Inc.
Preview Istruzzjonijiet tal-Operazzjoni tal-Inklinometru Diġitali Baseline 12-1057
Gwida għall-utent għall-Inklinometru Diġitali Baseline (Mudell 12-1057), li tkopri t-tħaddim, il-modi, u l-kalibrazzjoni għal kejl preċiż tal-angolu.
Preview Manwal ta' Istruzzjonijiet tas-Settijiet ta' Evalwazzjoni tal-Polz tal-Linja Bażika - Kejl tas-Saħħa u l-ROM
Manwal ta' struzzjonijiet komprensiv għas-Settijiet ta' Evalwazzjoni tal-Polz Baseline®, li jkopri d-dinamometri (12-0250, 12-0251) u l-inklinometri (12-0502). Tgħallem dwar l-użu maħsub, l-użu, il-kalibrazzjoni, il-garanzija, u l-installazzjoni għal valutazzjoni preċiża tas-saħħa tal-muskoli tal-polz u l-firxa tal-moviment.
Preview Gwida għall-Utent tal-Miter tal-Livell tal-Ġisem Bażiku u l-Iskoliożi
Din il-gwida tipprovdi struzzjonijiet u informazzjoni dwar l-użu tal-Baseline Body Level and Scoliosis Meter għall-kejl tal-allinjament tal-ġisem u l-iskoperta tal-kurvaturi tas-sinsla tad-dahar. Tinkludi dettalji dwar kif twettaq diversi kejl, tinterpreta r-riżultati, u tuża l-worksheets assoċjati.