Introduzzjoni
The Thermco ACC3105DIG Laboratory Long Stem Digital Thermometer is designed for precise temperature measurements in laboratory and industrial settings. It features a long stem for reaching into various containers and offers high accuracy with a wide temperature range. Each unit is manufactured to exacting standards and comes with a NIST traceable certificate, ensuring reliability and precision.
Prodott Overview

Figura 1: Thermco ACC3105DIG Digital Thermometer. This image displays the thermometer with a white main body and a long red stainless steel stem. The digital display shows a temperature reading, and control buttons for 'HOLD', 'MAX/MIN', 'ON-OFF', and '°C/°F' are visible on the front panel. The stem is angled downwards from the main unit.
Setup
1. Spakkjar
Carefully remove the thermometer from its packaging. Inspect the device for any visible damage. Retain the packaging for future storage or transport.
2. Installazzjoni/Kontroll tal-Batterija
The thermometer is battery-powered. Ensure the battery is correctly installed. If the display does not light up, replace the battery according to the instructions in the Maintenance section.
3. L-Ewwel Tixgħil
Agħfas il- ON-OFF button to power on the device. The display should illuminate and show the current temperature.
Istruzzjonijiet Operattivi
1. Power On/Off
- To turn on the thermometer, press the ON-OFF buttuna.
- To turn off the thermometer, press the ON-OFF button again. The device may also have an auto-off feature to conserve battery life.
2. Kejl tat-Temperatura
- Insert the stainless steel stem into the substance or environment to be measured. Ensure the stem is sufficiently immersed for accurate readings.
- Wait for the temperature reading on the digital display to stabilize. This may take a few seconds depending on the temperature difference.
3. Unit Selection (°C/°F)
Agħfas il- ° C / ° F button to switch between Celsius and Fahrenheit temperature units. The selected unit will be indicated on the display.
4. Funzjoni HOLD
Agħfas il- ŻOMM button to freeze the current temperature reading on the display. This is useful for recording readings in hard-to-reach areas. Press the ŻOMM button again to release the reading and return to live measurement.
5. Funzjoni MAX/MIN
Agħfas il- MAX/MIN buttuna biex view the maximum or minimum temperature recorded since the device was powered on or the function was reset. Subsequent presses will cycle through MAX, MIN, and current temperature display. To reset the MAX/MIN values, typically hold the button down or power cycle the device.
Manutenzjoni
1. Tindif
Wipe the thermometer stem and body with a damp cloth. For sterilization, the stainless steel stem can be cleaned with appropriate laboratory disinfectants. Do not immerse the main body of the thermometer in liquid.
2. Ħażna
Store the thermometer in a clean, dry place away from extreme temperatures and direct sunlight. Use the protective sleeve or case if provided.
3. Sostituzzjoni tal-batterija
When the display becomes dim or erratic, it's time to replace the battery. Locate the battery compartment, usually on the back or side of the main unit. Open it, remove the old battery, and insert a new one of the same type, observing polarity. Close the compartment securely.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-ebda wiri jew wiri mudlam | Batterija baxxa jew mejta; installazzjoni ħażina tal-batterija. | Ibdel il-batterija; kun żgur li l-polarità hija korretta. |
| Qari mhux eżatt | Insufficient immersion of stem; sensor contamination; extreme environmental conditions. | Ensure proper immersion depth; clean the stem; allow thermometer to acclimate to environment. |
| Buttuni ma jirrispondux | Battery issue; internal malfunction. | Ibdel il-batterija. Jekk il-problema tippersisti, ikkuntattja l-appoġġ għall-klijenti. |
Speċifikazzjonijiet
- Isem tal-Mudell: ACC3105DIG
- Ditta: THERMCO
- Tul taz-zokk: 5 Pulzier
- Firxa tat-Temperatura: -50 sa 150°C (-58 sa 302°F)
- Eżattezza: +/- 1.0 ° C
- Tip ta' wiri: Diġitali
- Sors tal-Enerġija: Mħaddma bil-batterija
- Materjal ta 'barra: Stainless Steel
- Konformità: NIST Compliant w/Certificate
- Kura tal-Prodott: Imsaħ Nadif





