1. Prodott Aktarview
The Winegard LNA-100 Boost TV Antenna Amplifier is designed to enhance indoor non-amplified antenna signals, improving reception for HDTVs. It aims to increase signal range and the number of available broadcast channels. Utilizing advanced amplifier technology, the Boost minimizes pixelation and signal dropouts, providing a clearer television signal.
X'inhu Inkluż:
- Winegard LNA-100 Boost Digital TV Antenna Ampaktar ħaj
- USB Power Cable (3-foot)
- Adapter 110V
- Printed Documentation

This image displays the Winegard LNA-100 Boost TV Antenna Amplifier. It is a compact, white rectangular unit featuring a male coaxial connector on one end and a short white cable with a female coaxial connector on the other. A USB power cable extends from the side of the main unit.
2. Setup u Installazzjoni
- Qabbad l-Antenna: Connect the coaxial cable from your non-amplified antenna to the 'ANT/AMP' port on the Winegard LNA-100 ampaktar ħaj.
- Connect to TV/Splitter: Connect a coaxial cable from the 'TV/TUNER' port on the amplifier to your television's antenna input. If distributing the signal to multiple TVs, connect this cable to a signal splitter, then connect the splitter outputs to your televisions.
- Konnessjoni tal-Enerġija: Ipplaggja l-kejbil tal-enerġija USB inkluż fil- amplifier. Connect the other end of the USB cable to the provided 110V adapter. Plug the adapter into a standard electrical outlet. An LED indicator on the amplifier will illuminate to confirm power status.
- Scan tal-Kanal: After all connections are made and the amplifier is powered, perform a channel scan on your television to detect available broadcast channels. Refer to your TV's instruction manual for specific channel scanning procedures.
3. Istruzzjonijiet Operattivi
The Winegard LNA-100 Boost amplifier operates continuously once powered. It is designed to enhance signals from any passive (non-amplified) TV antenna.
- Titjib tas-Sinjal: Il- amplifier features Clear Circuit Technology, designed to reduce signal noise (1 dB typical noise figure) and improve signal quality for both VHF and UHF frequencies. This technology helps to minimize pixelation and signal dropouts.
- FM Trap: A built-in FM trap attenuates FM signals, preventing them from interfering with digital TV channels and maintaining signal integrity.
- Indikatur tal-Enerġija: L-LED fuq il- amplifier indicates that the unit is receiving power and functioning.
4. Manutenzjoni
The Winegard LNA-100 Boost TV Antenna Amplifier requires minimal maintenance. Keep the unit clean and free from dust. Ensure all cable connections remain secure. Avoid exposing the amplifier to moisture or extreme temperatures, as it is designed for indoor use only.
5 Issolvi l-problemi
- No Signal or Poor Reception:
- Verify all coaxial connections are tight and secure.
- Tiżgura l- amplifier is powered on; check if the LED indicator is illuminated.
- Agħmel skennjar ta' kanali ġodda fuq it-televiżjoni tiegħek.
- Adjust the position of your antenna. Obstructions like new buildings or terrain can affect signal reception.
- Fewer Channels Detected:
- Ensure your TV is set to the correct input source (e.g., 'Antenna' or 'Air').
- Xi wħud amplifiers may over-amplify strong local signals, potentially causing issues. If you are very close to broadcast towers, an amplifier might not be necessary or could degrade reception.
- Re-scan for channels multiple times.
- Pixelation or Signal Dropouts:
- This can indicate a weak signal or interference. Ensure the amplifier is correctly installed and powered.
- Iċċekkja għal sorsi potenzjali ta' interferenza (eż., apparati elettroniċi oħra, oġġetti kbar tal-metall).
6. Speċifikazzjonijiet
- Dimensjonijiet tal-Prodott: 8.5 x 0.75 x 1.5 pulzieri
- Piż tal-oġġett: 5.3 uqija
- Manifattur: Kumpanija Winegard
- ASIN: B00BN5Z2UY
- Numru tal-Mudell tal-Oġġett: LNA-100
- Tip ta 'antenna: Televiżjoni
- Ditta: Winegard
- Kulur: Abjad
- Impedenza: 75 Ohm
- Gain (typical): 20 dB
- Noise Figure (typical): 1 dB
- Qawwa: +5V (via USB)
7. Garanzija u Appoġġ
The Winegard LNA-100 Boost Digital TV Antenna Amplifier includes a 1-year limited warranty covering parts and labor. For technical assistance or warranty claims, please contact Winegard customer support. Complimentary telephone and email support are available.
8. Vidjows Uffiċjali tal-Prodott
Ma nstab l-ebda vidjow uffiċjali tal-prodott mill-bejjiegħ biex jiġi inkorporat f'dan il-manwal.





