Introduzzjoni
The DIG ECO1ASV.075 is an innovative single-station irrigation controller designed for efficient water management. This unit is powered entirely by ambient light (solar energy), eliminating the need for batteries or external AC power. It comes pre-mounted on a 3/4-inch anti-siphon valve, making it suitable for both drip irrigation and sprinkler systems. The integrated anti-siphon valve includes flow control and internal/external bleed features, crucial for protecting your household water supply from contamination. Its patented photovoltaic module and microelectronic energy management system ensure reliable operation in various light conditions, providing continuous power to the controller.
Karatteristiċi Ewlenin
- Ambient Light Powered: Operates solely on solar energy, requiring no backup batteries or AC power.
- Applikazzjoni versatili: Compatible with both drip irrigation and sprinkler systems.
- Integrated Anti-Siphon Valve: Features a 3/4-inch anti-siphon valve with flow control for water supply protection.
- Interface faċli għall-utent: Equipped with seven buttons and an integrated LCD for easy programming.
- Programmazzjoni Flessibbli: Allows for programmable run times from 1 minute up to 5 hours and 59 minutes.
- Sostenibbiltà Ambjentali: Utilizes clean, renewable solar energy for eco-friendly operation.
Komponenti tal-Prodott
The DIG ECO1ASV.075 controller and valve assembly consists of the following main parts:
- Controller Unit: The top grey housing containing the solar panel, LCD screen, and control buttons.
- Anti-Siphon Valve: The black valve body with 3/4-inch inlet and outlet connections, designed to prevent backflow.
- Pum tal-Kontroll tal-Fluss: Located on the valve, used to adjust water flow.
- Solenojd: The component that opens and closes the valve, connected to the controller.
Immaġni 1: Fuqview of the DIG ECO1ASV.075 Ambient Light Powered Controller with 3/4" Anti-Siphon Valve. This image displays the complete unit, showing the grey controller unit mounted atop the black anti-siphon valve. The solar panel is visible on the controller's top surface.
Image 2: Close-up of the DIG ECO1ASV.075 Controller's user interface. The protective cover is open, revealing the LCD screen and the seven control buttons. A small diagram on the inside of the cover provides quick reference for button functions.
Setup u Installazzjoni
Proper installation is crucial for the optimal performance and longevity of your ECO1ASV.075 controller. Ensure all connections are secure and watertight.
- Ipprepara s-Sit: Choose a location that receives adequate ambient light throughout the day for the solar panel. The valve should be installed above the highest sprinkler head or emitter in the zone to ensure proper anti-siphon function.
- Qabbad mal-Provvista tal-Ilma:
- Identify the inlet (upstream) and outlet (downstream) ports on the anti-siphon valve. Arrows on the valve body typically indicate flow direction.
- Connect the inlet side of the valve to your main water supply line (e.g., garden hose, PVC pipe).
- Connect the outlet side of the valve to your irrigation system (drip line or sprinkler manifold).
- Use appropriate thread sealant (e.g., PTFE tape) on all threaded connections to prevent leaks.
- Assigura l-Unità: While the valve provides a stable base, ensure the entire assembly is securely positioned to prevent accidental damage or dislodgement.
- Ħlas Inizjali: Allow the unit to sit in ambient light for at least 2-3 hours before initial programming to ensure the internal energy management system is sufficiently charged.
- Test għal Tnixxijiet: Slowly turn on the main water supply and check all connections for leaks. Tighten as necessary.
Istruzzjonijiet Operattivi
The ECO1ASV.075 controller features a simple interface for programming your irrigation schedule.
Interface tal-Kontrollur
The controller has an LCD screen and seven buttons:
- Display LCD: Shows current time, program settings, and status.
- Buttuni: Used for navigation, setting values, and manual operation. Refer to Image 2 for button layout.
Ipprogrammar tal-Iskeda Tiegħek
Follow these steps to set up your watering program:
- Activate Screen: Touch any button to activate the LCD screen if it is off.
- Issettja l-Ħin Kurrenti: Navigate to the time setting mode (consult the quick guide on the controller's cover or full manual for specific button presses) and set the current time.
- Set Watering Start Time: Choose the desired time for your irrigation cycle to begin.
- Set Run Time: Program the duration of each watering cycle. The controller allows run times from 1 minute up to 5 hours and 59 minutes, adjustable in 1-minute increments.
- Issettja l-Frekwenza tat-Tisqija: Select how often the irrigation cycle should repeat (e.g., daily, every other day, specific days of the week).
- Ħlief Settings: Ensure all settings are saved before exiting the programming mode.
Operazzjoni Manwali
To manually turn the water on or off, or to initiate a manual watering cycle:
- Locate the manual operation button (often indicated by a water drop or 'ON/OFF' symbol).
- Press the button to cycle through manual options (e.g., manual ON, manual OFF, manual cycle).
- Confirm your selection. The valve will open or close accordingly.
Manutenzjoni
Regular maintenance ensures the longevity and efficient operation of your DIG ECO1ASV.075 controller.
- Tindif tal-Panew Solari: Periodically wipe the solar panel on top of the controller with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures maximum light absorption and power generation.
- Valve Inspection: Annually inspect the anti-siphon valve for any signs of wear, cracks, or leaks.
- Azzjoni tax-xitwa (jekk applikabbli): In regions with freezing temperatures, disconnect the unit from the water supply and drain all water from the valve and irrigation lines to prevent freeze damage. Store the controller in a protected, non-freezing environment.
- Tneħħija tal-Fdalijiet: Ensure no debris obstructs the valve's internal components or the anti-siphon mechanism.
Issolvi l-problemi
If you encounter issues with your ECO1ASV.075 controller, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Controller screen is blank or dim. | Insufficient ambient light for charging. | Move the unit to a location with more direct or consistent ambient light. Allow several hours for charging. |
| Valve does not open/close. | Low power, solenoid issue, or debris in valve. | Ensure controller is charged. Check solenoid wire connection. Inspect valve for debris and clear if necessary. |
| L-ilma joħroġ mill-valv. | Loose connections, damaged O-rings, or debris in valve seat. | Tighten all connections. Inspect and replace O-rings if damaged. Flush the valve to remove debris. |
| Program not running as scheduled. | Incorrect programming, low power, or manual override active. | Verify program settings (start time, run time, frequency). Ensure controller is charged. Check if manual override is active and deactivate it. |
Speċifikazzjonijiet
| Attribut | Dettall |
|---|---|
| Numru tal-Mudell | ECO1ASV.075 |
| Brand | Ħaffer |
| Sors tal-Enerġija | Ambient Light (Solar) |
| Daqs tal-Valv | 3/4 inch Anti-Siphon Valve |
| Programmable Run Times | 1 minute to 5 hours 59 minutes (in 1-minute increments) |
| Interface | 7 buttons with integrated LCD |
| Dimensjonijiet (madwar) | 15.24 x 10.16 x 12.7 ċm (6 x 4 x 5 pulzieri) |
| Piż (madwar) | 0.01 Liri (4.54 gramma) |
| Voltage | 5 Volts |
| UPC | 013158792017 |
Garanzija u Appoġġ
DIG products are manufactured to high quality standards. For specific warranty information and terms, please refer to the documentation included with your purchase or visit the official DIG website. For technical support, troubleshooting assistance beyond this manual, or replacement parts, please contact DIG customer service.
Please note: This manual provides general guidance. Always refer to the latest information and specific instructions provided by the manufacturer.
