1. Introduzzjoni
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Genuine Nissan 28933-ZL00A Washer Nozzle Assembly. This component is designed to deliver windshield washer fluid effectively, ensuring clear visibility during vehicle operation. It is an Original Equipment Manufacturer (OEM) part, ensuring compatibility and performance with specified Nissan vehicles.
2. Informazzjoni dwar is-Sigurtà
Always observe general safety precautions when working on a vehicle. Ensure the vehicle is turned off and the parking brake is engaged. Wear appropriate personal protective equipment, such as gloves and eye protection, to prevent injury. If you are unsure about any installation step, consult a qualified automotive technician.
3. Kontenut tal-Pakkett
- Genuine Nissan 28933-ZL00A Washer Nozzle Assembly (1 unit)
Figura 3.1: The Genuine Nissan 28933-ZL00A Washer Nozzle Assembly. This image displays the Genuine Nissan 28933-ZL00A Washer Nozzle Assembly, consisting of a black nozzle head and an attached black flexible hose, designed for windshield washer fluid delivery.
4. Istruzzjonijiet ta 'installazzjoni
The installation of the washer nozzle assembly is generally straightforward. It is important to note that while the nozzle itself may appear identical for both driver and passenger sides, the attached hose length may vary depending on the vehicle's specific requirements. Adjustments to hose length may be necessary for proper fitment.
- Preparazzjoni: Park the vehicle on a level surface and turn off the engine. Open the hood to access the windshield cowl area.
- Accessing the Nozzle: Carefully remove any covers or trim panels that obstruct access to the existing washer nozzle. A plastic trim removal tool or a flat-head screwdriver (used with caution to avoid damage) may be required to gently pry off retaining clips or panels.
- Disconnecting the Old Nozzle: Locate the hose connected to the old washer nozzle. Gently disconnect the hose from the nozzle. If the nozzle is secured by clips, carefully release them.
- Removing the Old Nozzle: Once disconnected and unclipped, the old nozzle can typically be removed by gently prying it upwards or outwards from its mounting point on the cowl. A putty knife can be useful for this step.
- Installing the New Nozzle:
- Insert the new Genuine Nissan 28933-ZL00A Washer Nozzle Assembly into the mounting hole. Ensure it seats securely and the retaining clips (if present) engage properly.
- Connect the washer fluid hose to the new nozzle's inlet. Ensure a snug fit to prevent leaks.
- If installing on the passenger side and the hose is excessively long, carefully trim the hose to the appropriate length for a neat and secure connection.
- Ittestjar: Close the hood partially and test the washer system. Observe the spray pattern and ensure there are no leaks. Adjust the nozzle direction if necessary (some nozzles allow for minor adjustment with a small pin or tool).
- Assemblaġġ mill-ġdid: Reinstall any removed covers or trim panels, ensuring all clips and fasteners are securely in place.
5. Operazzjoni
The washer nozzle assembly operates in conjunction with your vehicle's windshield washer system. To activate, engage the windshield washer stalk or button inside your vehicle. Washer fluid will be sprayed onto the windshield, allowing the wipers to clear dirt and debris for improved visibility.
6. Manutenzjoni
Regular maintenance helps ensure optimal performance of your washer nozzle assembly:
- Livell tal-Fluwidu: Periodically check and refill the windshield washer fluid reservoir with an appropriate washer fluid.
- Isodd taż-żennuna: If the spray pattern becomes weak or uneven, the nozzle may be clogged. Use a thin needle or pin to gently clear any debris from the nozzle opening.
- Spezzjoni tal-pajp: Inspect the washer fluid hose for cracks, kinks, or loose connections that could lead to leaks or reduced fluid pressure.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| No fluid sprays from nozzle | Empty fluid reservoir, clogged nozzle, disconnected hose, faulty pump. | Refill reservoir, clear nozzle with a pin, reattach hose, inspect pump (professional assistance may be required). |
| Weak or uneven spray pattern | Partially clogged nozzle, low fluid level, kinked hose. | Clear nozzle, refill reservoir, inspect hose for kinks. |
| Fluid leaks around nozzle | Loose hose connection, damaged nozzle seal. | Ensure hose is securely connected, inspect nozzle for damage and replace if necessary. |
8. Speċifikazzjonijiet
- Numru tal-Mudell: 28933-ZL00A
- Ditta: Nissan
- Tip ta' Parti: Washer Nozzle Assembly
- Piż tal-oġġett: Madwar 10.4 uqija
- Numru tal-Parti tal-Manifattur: 28933-ZL00A
- Numru tal-Parti OEM: 28933-ZL00A
- UPC: 795962175797
- Speċifikazzjoni sodisfatta: OEM
- Data L-Ewwel Disponibbli: 27 ta’ Awwissu, 2013
9. Informazzjoni dwar Garanzija
This Genuine Nissan part comes with a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims procedures, please refer to the official Nissan warranty documentation provided with your vehicle or contact an authorized Nissan dealership. Keep your purchase receipt as proof of purchase.
10. Appoġġ għall-Klijent
If you encounter any issues or have questions not addressed in this manual, please contact your authorized Nissan dealership or Nissan customer service for assistance. When contacting support, please have your vehicle's VIN and the part number (28933-ZL00A) available.
For more information, you may visit the official Nissan websit: www.nissanusa.com
