Stabiliser Bar for Axis Helicopter
Model: Jamara_37026
Marka: Jamara
Introduzzjoni
This manual provides essential information for the safe and efficient use of your Jamara Stabiliser Bar for Axis Helicopter. Please read this manual thoroughly before assembly, operation, or maintenance to ensure optimal performance and longevity of the product.
The Stabiliser Bar is designed to enhance the flight stability of compatible Axis Helicopters, contributing to a more controlled and enjoyable flying experience. It is simple to assemble and immediately ready for use.
Istruzzjonijiet tas-Sigurtà
Dejjem segwi l-linji gwida ta' sigurtà li ġejjin biex tevita korrimenti jew ħsara:
- Keep small parts away from children under 3 years of age due to choking hazards.
- Ensure all components are securely fastened before operation. Loose parts can cause instability or detachment during flight.
- Do not modify the stabiliser bar or helicopter components. Unauthorized modifications can compromise safety and performance.
- Operate the helicopter in open, clear areas, away from obstacles, people, and animals.
- Store the product in a dry, cool place, away from direct sunlight and extreme temperatures.
Prodott Overview
Image: The Jamara Stabiliser Bar, designed for Axis Helicopters, shown as a key component for flight stability.
The stabiliser bar is a crucial component for maintaining the balance and smooth flight of your Axis Helicopter. It is engineered for durability and precise fit.
Setup u Installazzjoni
Follow these steps for proper installation of the stabiliser bar:
- Ħoll il-Komponenti: Carefully remove the stabiliser bar and any associated hardware from its packaging. Inspect for any visible damage.
- Identifika l-Punti tal-Immuntar: Refer to your specific Axis Helicopter's manual to locate the designated mounting points for the stabiliser bar. These are typically found near the main rotor assembly.
- Attach Stabiliser Bar: Align the stabiliser bar with the mounting points. Use the provided screws or clips to secure it firmly. Ensure it is centered and level.
- Ivverifika s-Sigurtà: Gently tug on the stabiliser bar to confirm it is securely attached and does not wobble. A loose stabiliser bar can negatively impact flight performance.
- Kontroll ta' qabel it-Titjira: Before the first flight after installation, perform a comprehensive pre-flight check of the helicopter, paying close attention to the rotor system and stabiliser bar.
Nota: If you are unsure about any step, consult a qualified technician or the helicopter's original instruction manual.
Konsiderazzjonijiet Operattivi
The stabiliser bar functions automatically once installed, contributing to the helicopter's inherent stability. No direct user operation of the bar itself is required during flight.
- Flight Stability: The stabiliser bar helps dampen oscillations and maintain a level flight attitude, especially during hovering and slow maneuvers.
- Kundizzjonijiet tar-Riħ: While the stabiliser bar improves stability, avoid operating the helicopter in strong winds, which can still overwhelm its control capabilities.
- Smooth Movements: Practice smooth and gradual control inputs to fully benefit from the enhanced stability provided by the bar.
Manutenzjoni
Regular maintenance ensures the longevity and performance of your stabiliser bar:
- Spezzjoni Viżwali: Before and after each flight, visually inspect the stabiliser bar for any signs of bending, cracks, or wear.
- Kontroll tal-Konnessjoni: Periodically check that the stabiliser bar remains firmly attached to the helicopter. Tighten any loose screws if necessary.
- Tindif: If the stabiliser bar becomes dirty, gently wipe it with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Ħażna: When not in use, store the helicopter with the stabiliser bar attached in a protective case or a safe location to prevent accidental damage.
Issolvi l-problemi
If you encounter issues related to the stabiliser bar, consider the following:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Helicopter unstable after stabiliser bar installation. | Stabiliser bar not securely attached or bent. | Check all connections and ensure the bar is straight and firmly mounted. Replace if bent. |
| Unusual vibrations during flight. | Loose stabiliser bar or damaged component. | Inspect the stabiliser bar and surrounding rotor components for damage or looseness. Tighten or replace as needed. |
| Difficulty in controlling helicopter. | Stabiliser bar not compatible or incorrectly installed. | Verify the stabiliser bar is the correct model for your helicopter. Re-read installation instructions carefully. |
For persistent issues, contact Jamara customer support or a certified hobby technician.
Speċifikazzjonijiet
| Attribut | Dettall |
|---|---|
| Isem tal-Prodott | Stabiliser Bar for Axis Helicopter |
| Brand | Jamara |
| Numru tal-Mudell | Jamara_37026 |
| ASIN | B00BCVXDIW |
| Dimensjonijiet tal-Prodott | 11.81 x 11.81 x 11.81 pulzieri |
| Piż tal-oġġett | 4.4 liri |
| Età Rakkomandata mill-Manifattur | 3 snin 'il fuq |
| Data ta' Rilaxx | 1 ta’ Awwissu, 2018 |
| Manifattur | Jamara (JAMXM) |
Garanzija u Appoġġ
Jamara products are manufactured with high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your original purchase or visit the official Jamara websit.
For technical support, replacement parts, or further assistance, please contact Jamara customer service:
- Websit: www.jamara.com (Nota: Dan huwa detentur tal-post URL, please refer to official product documentation for actual support contact.)
- Email: Irreferi għal websit għad-dettalji tal-kuntatt.
- Telefon: Irreferi għal websit għad-dettalji tal-kuntatt.
When contacting support, please have your product model number (Jamara_37026) and ASIN (B00BCVXDIW) ready.
