Dawl tal-Progress P5607-20

1-Light Clear Flat Glass Traditional Outdoor Wall Lantern Light

Mudell: P5607-20

Marka: Progress Lighting

Introduzzjoni

This instruction manual provides detailed guidance for the safe installation, operation, and maintenance of your new Progress Lighting Outdoor Wall Lantern. Please read all instructions carefully before beginning installation and retain this manual for future reference. Proper installation and care will ensure optimal performance and longevity of your lighting fixture.

Progress Lighting 1-Light Outdoor Wall Lantern in Antique Bronze

Immaġni: Quddiem view of the 1-Light Clear Flat Glass Traditional Outdoor Wall Lantern Light in Antique Bronze finish.

Informazzjoni dwar is-Sigurtà

  • TWISSIJA: Riskju ta' xokk elettriku. Skonnettja l-provvista tal-enerġija mis-circuit breaker jew mill-kaxxa tal-fjużijiet qabel l-installazzjoni jew is-servizz.
  • All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Contact a qualified electrician if you are unfamiliar with proper electrical wiring installations.
  • Use only UL/cUL listed wire connectors.
  • Dan l-apparat huwa ddisinjat għall-użu fuq barra u huwa adattat għal postijiet imxarrbin.
  • Taqbiżx il-wat massimutage speċifikat għall-bozza.
  • Ilbes nuċċalijiet u ingwanti tas-sigurtà waqt l-installazzjoni.

Kontenut tal-Pakkett

Iċċekkja li l-partijiet kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek:

  • A. Fixture Body (1)
  • B. Mounting Plate (1)
  • C. Mounting Screws (2)
  • D. Wire Connectors (3)
  • E. Decorative Nuts (2)
  • F. Glass Panels (4, pre-installed)

Speċifikazzjonijiet

KaratteristikaDettall
Numru tal-MudellP5607-20
Dimensjonijiet (W x H)4-1/2 inches x 8 inches
TemmBronż Antik
Tip tal-ħġieġĦġieġ Ċatt Ċar
Tip ta' bozzaBażi Medja (E26)
Max Wattage100 Watts (Incandescent equivalent)
Klassifikazzjoni tal-postPost imxarrab Elenkat
Dimensions of the Progress Lighting Outdoor Wall Lantern

Image: Diagram showing the width (4.5 inches) and height (8 inches) of the wall lantern.

Gwida għall-Installazzjoni

Follow these steps for proper installation of your outdoor wall lantern. It is recommended to watch the accompanying video for visual guidance on sizing and placement.

Għodod Meħtieġa:

  • Tornavit tar-ras Phillips
  • Tornavit Flathead
  • Strippers tal-Wajer
  • Tejp Elettriku (mhux obbligatorju)
  • Nuċċalijiet tas-Sigurtà

Qabel l-Installazzjoni:

  1. Itfi l-enerġija: Locate the circuit breaker or fuse box that supplies power to the light fixture location. Turn off the main power switch.
  2. Iftaħ il-kontenut tal-pakkett: Carefully remove all components from the packaging. Keep the packaging materials until installation is complete to ensure no small parts are lost.
  3. Review existing wiring: Ensure the existing electrical box is securely mounted and capable of supporting the fixture's weight.

Immuntar tal-Fitture:

  1. Attach the mounting plate (B) to the electrical box using the mounting screws (C). Ensure the plate is level and secure.
  2. Pull the electrical wires from the electrical box through the center hole of the mounting plate.

Konnessjonijiet tal-Wiring:

  1. Connect the bare copper ground wire from the fixture to the bare copper ground wire from the electrical box using a wire connector (D). If your electrical box has a ground screw, wrap the fixture's ground wire around it before connecting to the supply ground wire.
  2. Connect the white (neutral) wire from the fixture to the white (neutral) wire from the electrical box using a wire connector (D).
  3. Connect the black (hot) wire from the fixture to the black (hot) wire from the electrical box using a wire connector (D).
  4. Ensure all wire connections are secure. Wrap electrical tape around the wire connectors for added insulation if desired.

L-iżgurar tal-Armatura:

  1. Carefully push all excess wiring into the electrical box.
  2. Align the holes on the fixture body (A) with the threaded posts on the mounting plate (B).
  3. Secure the fixture body to the mounting plate using the decorative nuts (E). Tighten firmly but do not overtighten.

Installazzjoni tal-bozza:

  1. Insert one medium base (E26) bulb (not included) into the socket. Do not exceed the maximum recommended wattage ta '100 Watts.
Progress Lighting Outdoor Wall Lantern with an installed bulb

Immaġni: Ġenb view of the wall lantern with a clear incandescent bulb installed, showing the internal socket.

Sizing and Selection Guidance Video:

For additional guidance on selecting the appropriate size and mounting height for outdoor lighting fixtures, please watch the official Progress Lighting video below:

Video: An official Progress Lighting guide on sizing and selecting outdoor lighting fixtures, covering optimal placement for entryways, garages, and other outdoor areas.

Istruzzjonijiet Operattivi

Once the fixture is securely installed and wired, restore power at the circuit breaker. The light fixture can then be operated using your wall switch or external control system (if applicable).

Manutenzjoni

  • Tindif: Biex tnaddaf l-apparat, itfi l-elettriku u ħallih jiksaħ. Imsaħ b'ċarruta ratba u nadifa.amp drapp. Tużax prodotti tat-tindif jew solventi li joborxu, għax jistgħu jagħmlu ħsara lill-finitura jew lill-ħġieġ.
  • Sostituzzjoni tal-bozza: Ensure power is off before replacing the bulb. Allow the bulb to cool completely before touching. Replace with a new medium base (E26) bulb, not exceeding 100 Watts.
  • Spezzjoni Perjodika: Iċċekkja perjodikament il-konnessjonijiet u l-ħardwer tal-immuntar kollha għal issikkar.

Issolvi l-problemi

ProblemaKawża PossibbliSoluzzjoni
Id-dawl ma jixgħelx.L-ebda qawwa għall-apparat.Iċċekkja s-circuit breaker jew il-fjus. Kun żgur li s-swiċċ tal-ħajt ikun mixgħul.
Konnessjonijiet tal-wajer sfużi.Turn off power and check all wire connections.
Bozza difettuża.Ibdel il-bozza.
Teptip ħafif.Bozza maħlula.Issikka l-bozza fis-sokit.
Tip ta' bozza jew wat mhux korrettatage.Ensure bulb meets specifications.
Wiring maħlul.Turn off power and check all wire connections.

Garanzija u Appoġġ

Progress Lighting products are manufactured to the highest standards and are backed by a limited warranty. For specific warranty details, technical support, or replacement parts, please visit the official Progress Lighting webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.

Għal aktar informazzjoni, żur: Ħanut tad-Dawl Progress fuq Amazon

Dokumenti Relatati - P5607-20

Preview Dawl Pendant Atwell ta' Progress Lighting - P500284-109
Skopri d-dawl pendant Progress Lighting Atwell (P500284-109) fil-Bronż Imqaxxar. Dan l-apparat impressjonanti fih taħlita unika ta’ disinji ċirkolari u arkitettoniċi b’dellijiet globu ċari, ideali għal foyers, kċejjen, u kmamar tal-ikel f’ambjenti moderni ta’ nofs is-seklu, moderni, kontemporanji, jew lussużi. Juża żewġ bozoz b’bażi E12 ta’ massimu ta’ 60W u jista’ jitbaxxa kompletament.
Preview Progress Lighting Riley P400209-031 Chandelier Iswed b'5 Dwal - Speċifikazzjonijiet u Aktarview
Speċifikazzjonijiet dettaljati, karatteristiċi, u prodott aktar 'il fuqview Għall-lampier iswed ta' 5 dwal Progress Lighting Riley P400209-031 b'dellijiet tal-ħġieġ ċar. Jinkludi informazzjoni dwar id-dimensjonijiet, l-elettriku, l-immuntar, u l-garanzija.
Preview Progress Lighting P500284-031 Atwell Pendant Light - Speċifikazzjonijiet u Aktarview
Skopri d-dawl pendant Progress Lighting P500284-031 Atwell. Dan id-dokument jipprovdi speċifikazzjonijiet, karatteristiċi, u dettalji tal-installazzjoni għal dan l-apparat impressjonanti, ideali għal foyers, kċejjen, u kmamar tal-ikel.
Preview Progress Lighting Hartwick P710087-009 Applika tal-Ħajt tan-Nikil Brushed
Speċifikazzjonijiet dettaljati għall-applique tal-ħajt Progress Lighting Hartwick P710087-009, b'finitura tan-nikil brushed, ħġieġ opal imnaqqax, konformità mal-ADA, u adattat għal interjuri moderni. Jinkludi d-dimensjonijiet, id-dettalji elettriċi, u tal-immuntar.
Preview Gwida għall-Installazzjoni ta' Chandelier ta' 20 Dawl Progress Lighting P400399
Istruzzjonijiet komprensivi għall-installazzjoni u informazzjoni dwar is-sigurtà għall-Progress Lighting P400399 Chandelier b'20 Dawl. Tgħallem kif tiġbor u twaħħal l-apparat il-ġdid tiegħek b'mod sigur.
Preview Istruzzjonijiet ta' Assemblaġġ u Installazzjoni ta' Progress Lighting 7206EB
Gwida dettaljata għall-assemblaġġ u l-installazzjoni tal-apparat tas-saqaf fluworexxenti Progress Lighting 7206EB, inklużi twissijiet ta' sigurtà, identifikazzjoni tal-partijiet, u struzzjonijiet pass pass bl-Ingliż, bl-Ispanjol, u bil-Franċiż.