Introduzzjoni
This manual provides detailed instructions for the proper installation and use of the ICOM MB-118 Mobile Mounting Bracket. This bracket is designed to securely hold compatible ICOM transceivers, such as the IC-7200 and IC-7300, in mobile or fixed environments. Please read this manual thoroughly before installation to ensure correct and safe usage.
Informazzjoni dwar is-Sigurtà
- Always ensure the mounting surface is stable and capable of supporting the combined weight of the bracket and the transceiver.
- Use appropriate tools for installation. Avoid overtightening screws, which can damage the bracket or the mounting surface.
- Verify all connections and fasteners are secure after installation to prevent movement during operation.
- Żomm il-partijiet żgħar u l-materjali tal-ippakkjar 'il bogħod mit-tfal.
Kontenut tal-Pakkett
Jekk jogħġbok iċċekkja li l-oġġetti kollha elenkati hawn taħt huma inklużi fil-pakkett tiegħek:
- ICOM MB-118 Mobile Mounting Bracket (1 unit)
- Mounting Hardware (screws, washers, nuts - quantity may vary)
If any items are missing or damaged, please contact your dealer or ICOM support.
Setup u Installazzjoni
The MB-118 bracket is designed for versatile mounting of your ICOM transceiver. It can be installed to allow the radio to be mounted either above or below a surface, such as a dashboard or shelf.
- Ipprepara l-post tal-immuntar: Select a flat, stable surface for installation. Ensure there is sufficient space for the transceiver and that the location does not obstruct vehicle controls or safety devices.
- Attach Bracket to Transceiver: Align the bracket with the mounting holes on the side of your ICOM IC-7200 or IC-7300 transceiver. Use the provided screws to securely fasten the bracket to the radio. Ensure the screws are tightened firmly but do not overtighten.
- Position the Transceiver with Bracket: Place the transceiver (with the attached bracket) in the desired mounting location. Mark the positions for the mounting screws on the chosen surface through the slots on the bracket.
- Secure the Bracket to the Surface: Drill pilot holes if necessary, then use appropriate screws and washers to secure the bracket to the mounting surface. The elongated slots on the bracket allow for some adjustment in positioning. Ensure all screws are tightened securely to prevent any movement of the radio during use.
Konsiderazzjonijiet Operattivi
Once installed, the MB-118 bracket requires no specific operation. Its function is to provide a stable and secure platform for your transceiver. Periodically check the tightness of all mounting screws, especially after initial installation and after driving on rough terrain, to ensure the radio remains securely in place.
Manutenzjoni
The ICOM MB-118 Mobile Mounting Bracket is constructed from durable materials and requires minimal maintenance.
- Tindif: Wipe the bracket with a soft, dry cloth to remove dust or dirt. Avoid using abrasive cleaners or solvents, which may damage the finish.
- Spezzjoni: Regularly inspect the bracket for any signs of wear, corrosion, or damage. Check that all screws are tight and that the bracket is firmly attached to both the transceiver and the mounting surface.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Transceiver feels loose or rattles | Viti tal-immuntar maħlula. | Check and tighten all screws securing the bracket to the transceiver and the mounting surface. |
| Bracket does not fit the radio | Incorrect bracket model for transceiver. | Verify that you have the correct MB-118 bracket for your ICOM IC-7200 or IC-7300 transceiver. |
| Difficulty aligning mounting holes | Improper positioning or pilot holes. | Adjust the bracket's position using the elongated slots. Ensure pilot holes (if used) are accurately drilled. |
Speċifikazzjonijiet
- Numru tal-Mudell: MB-118
- Manifattur: ICOM
- Numru tal-Parti: MB-118
- Piż tal-oġġett: Madwar 1.6 libbra (0.73 kg)
- Kulur: Iswed
- Tip ta 'Immuntar: Immonta fil-wiċċ
- UPC: 701630969148
- Kompatibilità: ICOM IC-7200, ICOM IC-7300 transceivers
Informazzjoni dwar Garanzija
For specific warranty details regarding the ICOM MB-118 Mobile Mounting Bracket, please refer to the official warranty documentation provided by ICOM or contact your authorized ICOM dealer. Warranty terms and conditions may vary by region and purchase location.
Appoġġ għall-Klijent
If you have any questions, require technical assistance, or need further support regarding the ICOM MB-118 Mobile Mounting Bracket, please contact ICOM customer service or your local authorized ICOM dealer. Contact information can typically be found on the official ICOM websit.
