1. Introduzzjoni
This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of your Fantini Cosmi CH112 electronic microprocessor room thermostat. Designed for both heating and air conditioning systems, the CH112 offers precise temperature control with three distinct temperature levels.
2. Informazzjoni dwar is-Sigurtà
- Sigurtà Elettrika: Installation should only be performed by qualified personnel. Disconnect power to the heating/cooling system before any wiring.
- Sigurtà tal-batterija: Use only specified battery types. Do not mix old and new batteries. Dispose of used batteries responsibly.
- Pjazzament: Install the thermostat away from direct sunlight, drafts, and heat sources (e.g., radiators, televisions) to ensure accurate temperature readings.
- Tindif: Uża drapp artab u niexef għat-tindif. Tużax prodotti tat-tindif jew solventi li joborxu.
3. Kontenut tal-Pakkett
Ivverifika li l-pakkett tiegħek fih l-oġġetti li ġejjin:
- Fantini Cosmi CH112 Room Thermostat
- Manwal ta' Istruzzjoni
Nota: Il-batteriji mhumiex inklużi u jridu jinxtraw separatament.
4. Prodott Aktarview
The Fantini Cosmi CH112 is an electronic microprocessor thermostat featuring a clear digital display and intuitive controls. It allows users to manage room temperature effectively with three distinct settings: Comfort, Economy, and Antifreeze.
Stampa 4.1: Quddiem view of the Fantini Cosmi CH112 thermostat, showing the digital display and control buttons. The display shows the current temperature and various mode indicators.
4.1. Buttuni tal-Kontroll
- Vleġeġ 'il fuq/'l isfel (▲ / ▼): Used to increase or decrease the desired temperature setting.
- Buttuna OFF: Itfi t-termostat.
- Comfort/Economy Button (Sun/Moon Symbol): Toggles between Comfort (day) and Economy (night) temperature modes.
4.2. Indikaturi tal-Wiri
- Wiri tat-Temperatura: Shows the current room temperature or the set temperature.
- Sun Symbol: Indicates Comfort mode (day temperature).
- Moon Symbol: Indicates Economy mode (night temperature).
- Flame Symbol: Indicates that the heating system is active.
- Simbolu tal-Batterija: Indicates battery level. A flashing or low symbol means batteries need replacement.
- Antifreeze Symbol: Indicates that the antifreeze protection is active.
5. Installazzjoni
The CH112 thermostat is designed for wall mounting. Follow these steps for proper installation:
- Agħżel Post: Select an indoor location away from direct heat sources, drafts, and direct sunlight. The ideal height is approximately 1.5 meters (5 feet) from the floor.
- Immuntar: Secure the thermostat base to the wall using appropriate screws. Ensure it is level.
- Wiring: Connect the two control wires from your heating/cooling system to the designated terminals on the thermostat. Refer to the wiring diagram provided in the separate installation guide for specific connections. This process typically involves connecting two low-voltagwajers.
- Inserzjoni tal-batterija: Open the battery compartment, typically located on the top or back of the unit. Insert two AAA batteries, ensuring correct polarity.
- Waħħal il-Qoxra: Securely attach the front cover of the thermostat to the mounted base.
Stampa 5.1: Technical drawing showing the dimensions of the Fantini Cosmi CH112 thermostat in millimeters (85mm width, 83mm height, 21mm depth).
6. Setup
After installation and battery insertion, perform the initial setup:
- Qawwa Mixgħul: Press the power button (if available) or ensure batteries are correctly inserted. The display will illuminate.
- Għażla tal-Unità tat-Temperatura: The thermostat typically defaults to Celsius. If Fahrenheit is desired, consult the detailed installation guide for specific button combinations to change this setting.
- Temperature Calibration (P02): If the displayed temperature does not match a known accurate thermometer, you can calibrate it. Access the calibration menu (often labeled P02 in advanced settings, refer to the full manual for access method) and adjust the offset. Confirm the change to save.
7. Istruzzjonijiet Operattivi
The CH112 thermostat offers simple operation for managing your indoor climate.
7.1. Setting Temperature Levels
The thermostat allows you to set three main temperature levels: Comfort, Economy, and Antifreeze.
- Temperatura tal-kumdità: This is your desired daytime or active period temperature. Use the Up/Down arrow buttons to set the Comfort temperature. The display will show the set temperature, and the sun symbol will be active.
- Economy Temperature: This is your desired nighttime or inactive period temperature, typically lower than Comfort to save energy. Press the Comfort/Economy button (sun/moon symbol) to switch to Economy mode. Use the Up/Down arrow buttons to set the Economy temperature. The moon symbol will be active.
- Antifreeze Temperature: This is a minimum temperature setting (typically 5°C) to prevent pipes from freezing when the system is off or in a very low-temperature setting. This feature is usually automatic and activates when the ambient temperature drops below the preset antifreeze threshold.
7.2. Qlib tal-Modi
- Comfort/Economy Toggle: Press the Comfort/Economy button (sun/moon symbol) to switch between your preset Comfort and Economy temperatures.
- Itfi: Press the OFF button to turn off the thermostat. The system will cease to regulate temperature, but the antifreeze protection may remain active depending on the model.
The thermostat regulates temperature with a precision of 0.1°C.
8. Manutenzjoni
8.1. Sostituzzjoni tal-batterija
When the battery symbol on the display indicates low power, replace the batteries promptly to ensure continuous operation. The CH112 uses two AAA batteries.
- Open the battery compartment, usually located on the top or back of the thermostat.
- Neħħi l-batteriji qodma.
- Insert two new AAA batteries, observing correct polarity (+/-).
- Agħlaq il-kompartiment tal-batterija sew.
8.2. Tindif
To clean the thermostat, gently wipe the surface with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the unit or interfere with its sensors.
9 Issolvi l-problemi
- Il-wiri huwa vojt: Check if batteries are correctly inserted and have sufficient charge. Replace batteries if necessary.
- Thermostat not controlling heating/cooling: Ensure the thermostat is powered on and in the correct mode (Comfort or Economy). Verify wiring connections.
- Qari tat-temperatura mhux preċiż: Ensure the thermostat is not exposed to direct sunlight, drafts, or heat sources. If the discrepancy persists, perform temperature calibration (refer to Section 6.3).
- System not turning off: Check the OFF button functionality. Ensure no other settings are overriding the command.
If issues persist after following these steps, consult a qualified technician.
10. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Manifattur | Fantini Cosmi SpA |
| Kodiċi tal-Oġġett | CH112 |
| Dimensjonijiet tal-Prodott | 8.2 x 2.1 x 8.3 ċm |
| Piż tal-oġġett | 80 gramma |
| Numru tal-Mudell | CH112 |
| Kulur | Iswed |
| Tip ta' Enerġija | Li jaħdem bil-batterija |
| Voltage | 250 Volt (switching capacity) |
| Numru ta' Oġġetti | 1 |
| Sistema ta' Kejl | Metriku |
| Stil tal-Wiri | Display tas-segment |
| Electrical Socket Type | Immuntar tal-ħajt |
| Funzjonijiet Speċjali | Antifreeze protection mechanism |
| Użu | Ġewwa |
| Komponenti Inklużi | Thermostat; instructions |
| Batteriji Meħtieġa | Iva (AAA) |
11. Garanzija u Appoġġ
Fantini Cosmi products are manufactured to high-quality standards. This product typically comes with a standard 2-year warranty from the date of purchase, covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims.
For technical support, warranty inquiries, or service, please contact Fantini Cosmi customer service through their official webis-sit jew l-informazzjoni ta' kuntatt ipprovduta mad-dokumentazzjoni tax-xiri tiegħek.
