ThruNite Archer 1A LED Flashlight User Manual

1. Introduzzjoni

Thank you for choosing the ThruNite Archer 1A LED Flashlight. This compact and powerful everyday carry (EDC) flashlight is designed for reliability and versatility, featuring multiple brightness levels and a durable aluminum construction. Please read this manual carefully before use to ensure proper operation and maintenance.

2. Informazzjoni dwar is-Sigurtà

• Sigurtà tal-għajnejn: Do not shine the flashlight directly into eyes. The powerful LED light can cause temporary vision impairment.
• Tfal: Żomm il-flashlight fejn ma jintlaħaqx mit-tfal biex tevita li tiġi attivata aċċidentalment jew li tintuża ħażin.
• Sigurtà tal-batterija: Use only recommended batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the flashlight will not be used for an extended period to prevent leakage.
• Sħana: The flashlight head may become warm during prolonged use on higher modes. This is normal.

3. Kontenut tal-Pakkett

Upon opening your ThruNite Archer 1A package, please verify that all items listed below are present:

• ThruNite Archer 1A LED Flashlight
• Manwal għall-Utent
• Lanyard
• O-rings żejda (2)
• Spare Tail Cap Button

Image: Contents of the ThruNite Archer 1A package, including the flashlight, user manual, lanyard, spare O-rings, and a spare tail cap button.

4. Prodott Aktarview

The ThruNite Archer 1A features a robust design with key components for optimal performance.

Image: ThruNite Archer 1A flashlight, angled view, showing the head, body, and pocket clip.

Komponenti:

• Kap: Contains the LED emitter, reflector, and lens.
• Swiċċ tal-ġenb: Used for changing brightness modes.
• Korp: The main housing with knurling għall-qabda.
• Clip tal-but: Removable steel clip for secure carrying.
• Tail Cap: Houses the tactical tail switch for power on/off.

Image: Close-up of the flashlight head, showing the side switch and the 'Archer 1A V3' model designation.

Image: Close-up of the flashlight body, showing the ThruNite branding and knurling għall-qabda.

Image: Close-up of the LED emitter and reflector inside the flashlight head.

5. Setup

Installazzjoni tal-batterija

1. Unscrew the tail cap counter-clockwise to open the battery compartment.
2. Insert one 1.5V AA battery (Alkaline or Ni-MH rechargeable) with the positive (+) end facing towards the flashlight head. The Archer 1A is also compatible with 14500 Li-ion batteries for higher output.
3. Screw the tail cap back on clockwise until it is fully tightened. Ensure the tail cap is securely fastened to maintain waterproofing.

6. Istruzzjonijiet Operattivi

Qawwa mixgħul/mitfi

• Biex Tixgħel: Fully press the tactical tail switch until it clicks.
• Biex Tintefa: Fully press the tactical tail switch again until it clicks.
• Momentarju Fuq: Lightly press and hold the tail switch for momentary illumination. Release to turn off.

Changing Brightness Modes

The Archer 1A features multiple brightness levels: Firefly, Low, Medium, High, and Strobe.

• With the flashlight turned on, twist the bezel (the front part of the head) to cycle through the modes: Firefly → Low → Medium → High.
• Modalità Strobe: From any mode, press and hold the side switch for approximately 1 second to activate Strobe mode. To exit Strobe, release the side switch and twist the bezel.

Funzjoni tal-Memorja

The Archer 1A includes a memory function. When the flashlight is turned off and then back on, it will automatically return to the last used general mode (Firefly, Low, Medium, or High). Strobe mode is not memorized.

7. Manutenzjoni

• Tindif: Naddaf il-qafas tat-torċa b'ċarruta ratba u damp cloth. For stubborn dirt, use a mild soap solution. Do not use harsh chemicals or abrasives.
• Ħjut u ċrieki O: Periodically lubricate the threads and O-rings with silicone grease to ensure smooth operation and maintain waterproofing. Replace worn O-rings with the provided spares.
• Ħażna tal-batterija: If the flashlight is not used for an extended period, remove the battery to prevent potential leakage and damage to the flashlight.

8 Issolvi l-problemi

If you encounter issues with your ThruNite Archer 1A, please try the following steps:

• Id-dawl ma jixgħelx:
  • Ensure the battery is inserted correctly with the positive (+) end towards the head.
  • Check if the battery has sufficient charge. Replace or recharge if necessary.
  • Kun żgur li l-għatu tad-denb ikun issikkat sew. Għatu tad-denb maħlul jista' jipprevjeni kuntatt elettriku.
  • Clean the battery contacts and threads with an alcohol swab to remove any dirt or corrosion.
• Light flickering or inconsistent output:
  • Iċċekkja ċ-ċarġ tal-batterija u ibdel jekk tkun baxxa.
  • Ensure the tail cap and head are securely tightened.
  • Clean the battery contacts and threads.

If these steps do not resolve the issue, please contact ThruNite customer support.

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

ThruNite products are manufactured to high-quality standards. For warranty information, product support, or to purchase accessories, please visit the official ThruNite webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.

Għal aktar għajnuna, tista' żżur il- ThruNite Store on Amazon.