Manwal tal-Utent tal-Interfaċċja ta' Sostituzzjoni tar-Radju PAC RP5-GM32 għal Vetturi LAN tal-GM

1. Introduzzjoni

This manual provides comprehensive instructions for the installation, operation, and maintenance of the PAC RP5-GM32 Radio Replacement Interface. The RP5-GM32 is designed to facilitate the integration of an aftermarket radio into select GM LAN vehicles while retaining essential factory features.

Please read this manual thoroughly before beginning installation to ensure proper functionality and to avoid potential damage to your vehicle or the interface.

2. Prodott Aktarview

The PAC RP5-GM32 is a radio replacement interface engineered to maintain key factory functionalities when upgrading your vehicle's audio system. It ensures a seamless transition to an aftermarket head unit.

Karatteristiċi ewlenin:

Retains OnStar functionality after factory radio replacement.
Maintains factory Bluetooth (for 2009+ model vehicles).
Preserves rear seat audio controls.
Retains all warning chimes (chime module included).
Provides pre-programmed steering wheel control retention.
Offers navigation output for aftermarket head units.

X'hemm fil-Kaxxa:

RP5-GM32 Interface Module
Ċineg tal-Wajers
Modulu taċ-Ċimplu (CMX)
Steering Wheel Control (SWC) Cable
Adapter tal-antenna
RCA Cables (for audio/video outputs)

PAC RP5-GM32 Radio Replacement Interface components including the main module, various wiring harnesses, and a chime module.

Figure 1: Components included with the PAC RP5-GM32 interface. This image displays the main interface module, multiple wiring harnesses with various connectors (including RCA and a 3.5mm jack for steering wheel control), a small chime module, and an antenna adapter.

3. Kompatibilità tal-Vettura

The RP5-GM32 is specifically designed for use in the following GM LAN vehicles:

All 2012-2013 GM trucks and SUVs equipped with factory navigation radios.
2012+ 2500 & 3500 trucks equipped with factory navigation radios.

Noti Importanti dwar il-Kompatibilità:

For 2012-2013 GM trucks & SUVs equipped with factory non-navigation radios, the RP5-GM31 interface must be used instead.
For 2014+ Silverado & Sierra 1500 series trucks, the RP5-GM51 interface must be used instead.

4. Setup u Installazzjoni

Installation of the RP5-GM32 requires technical knowledge of automotive electrical systems. If you are not comfortable with these procedures, it is recommended to seek professional installation.

Qabel ma tibda:

Skonnettja t-terminal negattiv tal-batterija tal-vettura biex tevita xorts elettriċi.
Kun żgur li l-komponenti kollha elenkati fit-Taqsima 2 huma preżenti.
Refer to the detailed wiring diagram provided with your specific product packaging for precise connections. This manual provides general guidance.

Passi Ġenerali ta' Installazzjoni:

Neħħi r-Radju tal-Fabbrika: Carefully remove the factory radio from the dashboard, following your vehicle's specific disassembly instructions.
Connect Interface Harness: Connect the vehicle-specific harness from the RP5-GM32 to the factory wiring harness in the vehicle.
Connect Aftermarket Radio: Connect the aftermarket radio's wiring harness to the corresponding wires on the RP5-GM32 harness. Pay close attention to power, ground, speaker, and accessory wires.
Kontroll tal-Istering Wheel (SWC): Connect the 3.5mm SWC jack from the RP5-GM32 harness to the SWC input on your aftermarket radio. If your radio uses a wired SWC input, connect the appropriate wires as per the detailed wiring diagram.
Chime Module (CMX): Connect the CMX module to the RP5-GM32 interface. Ensure it is securely mounted in a location where chimes can be heard clearly.
Riżultati tan-Navigazzjoni: If your aftermarket radio utilizes navigation features, connect the navigation output wires (e.g., parking brake, reverse, vehicle speed sense) from the RP5-GM32 to the corresponding inputs on your aftermarket radio.
Konnessjoni tal-antenna: Use the provided antenna adapter to connect the vehicle's factory antenna to the aftermarket radio.
Sistema tat-Test: Before fully reassembling the dashboard, reconnect the vehicle's battery and test all functions of the aftermarket radio, OnStar, steering wheel controls, and warning chimes.
Erġa' arma: Once all functions are verified, carefully reassemble the dashboard.

Note on Sony Bluetooth SWC: Sony Bluetooth Steering Wheel Control commands are only supported with revision 1.6.6.14 or higher of the RP5-GM32 firmware. Check your unit's firmware version if experiencing issues.

5. Istruzzjonijiet Operattivi

Once installed, the PAC RP5-GM32 operates automatically to retain the specified factory features. No direct user interaction with the interface module is typically required during normal operation.

OnStar: OnStar functionality will be retained. Refer to your vehicle's owner's manual for specific OnStar operation.
Kontrolli tal-istering: Your factory steering wheel audio controls will function with your aftermarket radio. The specific commands (volume, track, mode) will be pre-programmed.
Rear Seat Audio Controls: If your vehicle is equipped, rear seat audio controls will remain functional.
Ċimiterji ta' Twissija: All factory warning chimes will be reproduced through the CMX module.

6. Manutenzjoni

The PAC RP5-GM32 is designed for maintenance-free operation. However, the following general guidelines can help ensure its longevity:

Kun żgur li l-konnessjonijiet kollha jibqgħu siguri. Konnessjonijiet laxki jistgħu jwasslu għal funzjonalità intermittenti.
Keep the area around the interface module free from excessive dust or moisture.
Avoid exposing the module to extreme temperatures beyond typical automotive operating conditions.

7 Issolvi l-problemi

If you encounter issues after installing the RP5-GM32, review il-problemi u s-soluzzjonijiet komuni li ġejjin:

Ebda Qawwa għar-Radju Aftermarket:
- Check all power and ground connections from the RP5-GM32 harness to the aftermarket radio and the vehicle.
- Verify the vehicle's fuse for the radio circuit.
Il-Kontrolli tal-Istering Ma Jaħdmux:
- Ensure the 3.5mm SWC jack is fully inserted into the aftermarket radio's SWC input.
- Confirm your aftermarket radio is configured to accept external steering wheel controls.
- For Sony radios, verify firmware version is 1.6.6.14 or higher for Bluetooth SWC commands.
No Chimes or Incorrect Chime Volume:
- Check the connection to the CMX chime module.
- Ensure the CMX module is not obstructed.
No Fading Capability with Premium Amplified Systems:
- This is a known limitation. In premium amplified systems, the aftermarket stereo will not have fading capability.
Factory Satellite Radio / XM Tuner Not Retained:
- The RP5-GM32 does not retain factory satellite radio or XM tuner functionality. These are typically built into the factory radio and are removed when the factory radio is replaced.
OnStar Volume Adjustment from Steering Wheel Controls Not Working:
- The RP5-GM32 does not retain OnStar volume adjustment from steering wheel controls.
No Reverse Camera Power / Reverse Camera Not Displaying:
- The RP5-GM32 may not provide a dedicated reverse camera power output or trigger for all aftermarket head units. You may need to locate and tap into a vehicle's reverse light wire for the camera trigger.
No Sound from Bose Ampaktar ħaj:
- Ensure the blue wire (typically for amplifier turn-on) is correctly connected. Some instructions may incorrectly state it is not used, but it is necessary for triggering factory Bose ampliifikaturi.

If issues persist, consult the detailed installation guide provided with the product or contact PAC technical support.

8. Speċifikazzjonijiet

Karatteristika	Dettall
Brand	PAC
Numru tal-Mudell	RP5-GM32
Dimensjonijiet tal-Prodott (L x W x H)	9 x 9 x 2 pulzieri
Piż tal-oġġett	0.01 uqija
Manifattur	AAMP tal-Amerika
UPC	606523109260
L-Ewwel Data Disponibbli	30 ta’ Awwissu, 2014

9. Informazzjoni dwar Garanzija

The PAC RP5-GM32 comes with a Garanzija Limitata ta' Sena from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation included with your product or contact PAC customer service.

10. Appoġġ

For technical assistance, detailed wiring diagrams, or further inquiries regarding the PAC RP5-GM32, please visit the official PAC website or contact their customer support directly. Always have your product model number (RP5-GM32) and vehicle information ready when seeking support.

Manifattur: AAMP tal-Amerika

11. Ċaħda Legali

TWISSIJA: Dan il-prodott fih kimiċi magħrufa mill-Istat ta’ Kalifornja li jikkawżaw kanċer u difetti fit-twelid jew ħsara riproduttiva oħra.

	Gwida għall-Installazzjoni tas-Sostituzzjoni tar-Radju RP5-GM32 u l-Interfaċċja tal-Kontroll tal-Istering Gwida dettaljata għall-installazzjoni għall-Interfaċċja tal-Kontroll tal-Istering u s-Sostituzzjoni tar-Radju PAC RP5-GM32, iddisinjata għal vetturi General Motors b'ritenzjoni OnStar. Tinkludi struzzjonijiet dwar il-wajers, l-ipprogrammar u l-ittestjar.
	Gwida għall-Installazzjoni u l-Ipprogrammar tal-Interfaċċja ta' Sostituzzjoni tar-Radju PAC RP5-GM32 Gwida komprensiva għall-interfaċċja PAC RP5-GM32, li tiddeskrivi l-installazzjoni, l-ipprogrammar tal-kontroll tal-istering (SWC), iż-żamma tad-divertiment tas-sedil ta' wara (RSE), u l-aġġornamenti tal-firmware għal ċerti vetturi General Motors mgħammra b'sistemi ta' dejta ta' 29-bit.
	Gwida għall-Installazzjoni tas-Sostituzzjoni tar-Radju PAC RP5-GM32 u l-Interfaċċja tal-Kontroll tal-Istering Wheel Gwida komprensiva għall-installazzjoni tal-interfaċċja PAC RP5-GM32 biex tissostitwixxi r-radjijiet tal-fabbrika fil-vetturi ta' General Motors, filwaqt li żżomm OnStar, il-kontrolli tal-istering, u l-kontrolli tal-fabbrika. amplifiers. Jinkludi passi dwar il-wajers, l-ipprogrammar, u s-soluzzjoni tal-problemi, flimkien ma' bullettin tekniku dwar kwistjonijiet tal-ħruġ tal-enerġija.
	PAC RP5-GM32 Radio Replacement Interface Installation and Operation Guide This guide provides detailed instructions for installing and operating the PAC RP5-GM32 Radio Replacement Interface, which allows for the retention of factory features like Steering Wheel Controls and Telematics in select General Motors vehicles.
	Gwida għall-Installazzjoni tas-Sostituzzjoni tar-Radju PAC RP5-GM41 u l-Interfaċċja tal-Kontroll tal-Istering Wheel Gwida dettaljata għall-installazzjoni għall-interfaċċja PAC RP5-GM41, li tippermetti s-sostituzzjoni tar-radju u ż-żamma ta' karatteristiċi tal-fabbrika bħal OnStar u l-kontrolli tal-istering fil-vetturi General Motors. Tinkludi dijagrammi tal-wajers, struzzjonijiet ta' programmazzjoni, u bullettin tekniku għal kwistjonijiet ta' enerġija aċċessorji.
	Gwida għall-Installazzjoni tas-Sostituzzjoni tar-Radju PAC RP5-GM11 u l-Interfaċċja tal-Kontroll tal-Istering Wheel This guide provides instructions for installing the PAC RP5-GM11 interface, which allows for factory radio replacement in General Motors vehicles while retaining features like OnStar, steering wheel controls, and factory amplifiers. It includes wiring diagrams, programming instructions, and troubleshooting tips.

PAC RP5-GM32