Belimo FSLF24-S US Nar u Duħħan Damper Actuator Manual

1. Introduzzjoni

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Belimo FSLF24-S US Fire and Smoke Damper Actuator. This device is designed for the reliable control of fire and smoke dampers in ventilation and air conditioning systems, ensuring safety in critical building environments. Please read this manual thoroughly before proceeding with installation or operation.

2. Informazzjoni dwar is-Sigurtà

TWISSIJA:

• L-installazzjoni u l-manutenzjoni għandhom isiru minn persunal kwalifikat biss.
• Disconnect all power before installing or servicing the actuator to prevent electric shock.
• Kun żgur li l-wajers kollha jikkonformaw mal-kodiċijiet elettriċi lokali u nazzjonali.
• Tħaddimx l-attwatur lil hinn mill-volum speċifikat tiegħutage and environmental limits.
• This actuator is a safety device; ensure it is installed correctly and tested regularly.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti u bla ħsara meta tiftaħ il-pakkett:

• Belimo FSLF24-S US Nar u Duħħan Damper Attwatur
• Bracket/Ħardwer tal-Immuntar (jekk applikabbli)
• Manwal ta 'Istruzzjoni (dan id-dokument)

4. Speċifikazzjonijiet

5. Setup u Installazzjoni

The Belimo FSLF24-S US actuator is designed for panel mounting and requires careful installation to ensure proper function and safety. Always refer to the specific wiring diagrams provided with the product packaging for detailed electrical connections.

5.1 Immuntar tal-Attwatur

1. Ensure the mounting surface is clean, dry, and capable of supporting the actuator's weight.
2. Pożizzjona l-attwatur fuq id-damper shaft according to the damper manufacturer's instructions.
3. Secure the actuator using appropriate mounting hardware, ensuring a firm and stable connection.
4. Ivverifika li damper can move freely without obstruction after mounting.

5.2 Konnessjonijiet elettriċi

The FSLF24-S US actuator operates on 24 Volts. Electrical connections should only be made by a licensed electrician in accordance with all applicable codes.

• Disconnect power to the circuit before making any connections.
• Connect the 24V power supply to the designated screw terminals on the actuator.
• Kun żgur li l-konnessjonijiet kollha huma siguri u iżolati kif suppost.
• Double-check wiring against the provided diagram to prevent damage to the actuator or system.

Figura 1: Quddiem view of the Belimo FSLF24-S US Fire and Smoke Damper Actuator, showing its orange casing, control dial, and connection points. This image illustrates the general appearance and key features of the actuator for installation reference.

6. Istruzzjonijiet Operattivi

The Belimo FSLF24-S US actuator is designed for automatic operation in conjunction with a fire alarm or building management system. It typically operates in a fail-safe mode, meaning it will drive the damper to a safe position (e.g., closed) upon loss of power.

6.1 Qawwa Inizjali

1. After completing all electrical connections and mounting, restore power to the actuator.
2. Observe the actuator's initial movement. It should drive the damper to its default position (e.g., open or closed, depending on configuration).
3. Ivverifika li damper moves smoothly and without obstruction.

6.2 Ittestjar Funzjonali

Regular functional testing is crucial for fire and smoke dampers. Consult local fire safety regulations for required testing intervals.

• Initiate a test sequence from your building management system or fire alarm panel to activate the damper.
• Confirm that the actuator drives the damper to its intended fire/smoke safety position.
• Ivverifika li damper returns to its normal operating position once the test signal is removed.

7. Manutenzjoni

The Belimo FSLF24-S US actuator is designed for long-term, reliable operation with minimal maintenance. However, periodic inspection is recommended.

• Spezzjoni Annwali: Visually inspect the actuator and its connections for any signs of wear, damage, or corrosion.
• Kontroll Funzjonali: Perform a functional test of the damper and actuator as per local regulations (e.g., NFPA 80, NFPA 105).
• Tindif: Żomm l-attwatur ħieles mit-trab u l-fdalijiet. Uża drapp artab u niexef għat-tindif. Tużax prodotti tat-tindif jew solventi li joborxu.
• L-ebda Lubrikazzjoni Meħtieġa: L-attwatur huwa llubrikat fil-fabbrika u ma jeħtieġx lubrikazzjoni addizzjonali.

8 Issolvi l-problemi

If the actuator is not functioning as expected, consult the following table before contacting technical support.

9. Garanzija u Appoġġ

Belimo products are manufactured to high standards and typically come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Belimo websit.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Belimo customer support or your authorized Belimo distributor. When contacting support, please have your product model number (FSLF24-S US) and serial number (if applicable) readily available.

Belimo Official Websit: www.belimo.com