Manwal tal-Utent tal-Printer tat-Tikketti Termali Intermec Easycoder PC41

1. Introduzzjoni

This manual provides instructions for the safe and efficient operation of your Intermec Easycoder PC41 Thermal Label Printer. The PC41 is a desktop barcode label printer designed for direct thermal printing, featuring a 4-inch print width and multiple connectivity options including Serial, Parallel, and USB interfaces. Please read this manual thoroughly before operating the device.

2. Informazzjoni dwar is-Sigurtà

Osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korrimenti u ħsara lill-istampatur:

• Dejjem qabbad il-printer ma' sokit tal-elettriku ertjat.
• Do not operate the printer in wet or excessively humid environments.
• Żomm il-printer 'il bogħod mix-xemx diretta u minn sorsi ta' sħana.
• Kun żgur ventilazzjoni xierqa madwar l-istampatur.
• Skonnettja l-enerġija qabel ma tnaddaf jew tagħmel manutenzjoni.
• Avoid touching the print head immediately after printing, as it may be hot.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• Intermec Easycoder PC41 Thermal Label Printer
• Power Cord (US Power Cord)
• Cable USB
• Quick Start Guide (may be included)
• Driver CD (may be included, or drivers available online)

4. Setup

4.1 Spakkjar u Tqegħid

Carefully remove the printer from its packaging. Place the printer on a stable, level surface with adequate space for label loading and output.

4.2 Qawwa tal-Konnessjoni

1. Connect the power cord to the printer's power input port.
2. Ipplaggja t-tarf l-ieħor tal-korda tad-dawl fi żbokk elettriku ertjat.
3. Agħfas il-buttuna tal-enerġija biex tixgħel l-istampatur.

4.3 Konnessjoni ma 'Kompjuter

The PC41 printer supports USB, Serial, and Parallel connections.

• Konnessjoni USB: Qabbad tarf wieħed tal-kejbil USB mal-port USB tal-istampatur u t-tarf l-ieħor ma' port USB disponibbli fuq il-kompjuter tiegħek.
• Konnessjoni Serjali: Connect a serial cable (not included) to the printer's serial port and to your computer's serial port.
• Konnessjoni Parallel: Connect a parallel cable (not included) to the printer's parallel port and to your computer's parallel port.

4.4 It-Tagħbija tat-Tikketti

The PC41 is designed for direct thermal labels. Ensure the labels are compatible with direct thermal printing.

1. Iftaħ l-għatu ta' fuq tal-istampatur.
2. Poġġi r-romblu tat-tikketti fuq il-magħżel tal-provvista tal-midja, filwaqt li tiżgura li t-tikketti jidħlu mill-qiegħ tar-romblu.
3. Feed the leading edge of the labels through the media guides and under the print head assembly.
4. Adjust the media guides to fit the width of your labels snugly but without restricting movement.
5. Close the top cover. The printer may automatically calibrate or feed a few labels.

Figure 1: Intermec Easycoder PC41 Thermal Label Printer in operation, showing a label exiting the printer. This image illustrates the compact design and the label output mechanism.

4.5 Installazzjoni tas-sewwieq

Install the appropriate printer drivers on your computer. Drivers are typically available on a provided CD or can be downloaded from the Intermec (now Honeywell) support websit. Segwi l-istruzzjonijiet fuq l-iskrin għall-installazzjoni tad-drajver.

5. Istruzzjonijiet Operattivi

5.1 Stampar Bażiku

1. Kun żgur li l-istampatur ikun mixgħul u konness mal-kompjuter tiegħek.
2. Load the desired labels into the printer.
3. Open your label design software or application.
4. Select the Intermec PC41 as your printer.
5. Configure print settings such as label size, orientation, and quantity.
6. Initiate the print job from your software.

5.2 Dwal Indikaturi

Il-printer għandu dwal indikaturi biex jikkomunikaw l-istatus tiegħu:

• Aħdar Solidu: Printer is ready.
• Aħdar li jteptep: Data is being received or processed.
• Aħmar Solidu: Error condition (e.g., out of labels, cover open). Refer to troubleshooting.
• Aħmar li jteptep: Print head overheating or other critical error.

6. Manutenzjoni

Manutenzjoni regolari tiżgura prestazzjoni ottimali u testendi l-ħajja tal-istampatur tiegħek.

6.1 Tindif tar-Ras tal-Istampar

The print head should be cleaned periodically, especially if print quality degrades.

1. Itfi u aqla l-istampatur.
2. Iftaħ il-qoxra ta 'fuq.
3. Using a lint-free cloth or a print head cleaning pen moistened with isopropyl alcohol, gently wipe the print head surface.
4. Ħalli r-ras tal-istampar tinxef kompletament qabel ma tagħlaq l-għatu u tixgħel il-printer.

6.2 Tindif Ġenerali

Imsaħ il-barra tal-istampatur b'ċarruta ratba u damp drapp. Tużax tindif jew solventi li joborxu.

7 Issolvi l-problemi

This section addresses common issues you might encounter with your PC41 printer.

8. Speċifikazzjonijiet

Key technical specifications for the Intermec Easycoder PC41 Thermal Label Printer:

• Isem tal-Mudell: PC41A000000
• Ditta: Intermec (now Honeywell)
• Teknoloġija tal-Istampar: Termali Diretti
• Output tal-istampatur: Monokromu
• Wisa' tal-Istampar: 4 inches (as per description)
• Memorja: 512KB RAM / 1MB Flash (as per description)
• Teknoloġija tal-Konnettività: USB, Serial (IEEE 1284), Parallel
• Apparati Kompatibbli: PC
• Midja Stampata: Tikketti
• Piż tal-oġġett: 8.8 Liri
• L-Ewwel Disponibbli: 18 ta’ Ġunju 2014

9. Garanzija u Appoġġ

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Honeywell (formerly Intermec) support websit. Żomm l-irċevuta tax-xiri tiegħek għal pretensjonijiet ta' garanzija.