Manwal tal-Utent tal-JB Systems MIX-6 USB DJ Mixer

1. Introduzzjoni

This manual provides detailed instructions for the safe and efficient operation of your JB Systems MIX-6 USB DJ Mixer. Please read this manual thoroughly before use and retain it for future reference. The MIX-6 USB is a compact and robust 19-inch DJ mixer designed for professional and home use, offering versatile connectivity and control for your audio mixing needs.

2. Istruzzjonijiet tas-Sigurtà

Biex tiżgura tħaddim sikur u tevita ħsara, jekk jogħġbok osserva l-prekawzjonijiet ta' sigurtà li ġejjin:

• Provvista tal-Enerġija: Always connect the mixer to a grounded power outlet with the correct voltage as specified on the unit. Disconnect power before cleaning or servicing.
• Umdità: Do not expose the unit to rain, moisture, or excessive humidity. Keep liquids away from the mixer.
• Ventilazzjoni: Ensure adequate ventilation around the unit. Do not block ventilation openings. Avoid placing the mixer on carpets or other materials that may obstruct airflow.
• Sħana: Tpoġġix l-unità ħdejn sorsi tas-sħana bħal radjaturi, reġistri tas-sħana, stufi, jew apparat ieħor (inkluż amplifiers) li jipproduċu sħana.
• Servizzi: Do not attempt to service the unit yourself. Refer all servicing to qualified service personnel. Opening the unit may expose you to dangerous voltages jew perikli oħra.
• Tindif: Naddaf biss b'ċarruta niexfa. Tużax tindif likwidu jew tindif aerosol.
• Pjazzament: Place the mixer on a stable, level surface to prevent it from falling.

3. Prodott Aktarview

The JB Systems MIX-6 USB is a versatile 6-channel DJ mixer equipped with a bidirectional USB sound card, allowing for both playback and recording simultaneously. It features:

• 4 input channels with smooth 60mm dual-rail DJ faders.
• 2 separate DJ microphone inputs with 3-band EQ, on-air switch, and adjustable talkover.
• A dedicated 3.5mm stereo input on the front panel for easy connection of MP3 players or other portable devices.
• Gain, Treble, Mid, Bass controls, and peak indicators on all channels.
• A smooth 45mm dual-rail crossfader with adjustable curve and on/off switch.
• Two master outputs, including Master 1 with balanced XLR outputs.
• LED VU meters with CUE/master comparison function.
• Pre-fader listening (PFL) with cue mix and mix/split options.

Figura 3.1: Quddiem u fuq view of the JB Systems MIX-6 USB DJ Mixer, showing the main control surface with faders, knobs, and LED meters.

Figura 3.2: Angolat view of the MIX-6 USB mixer, highlighting its compact 19-inch rack-mountable design.

Figura 3.3: Fuq dettaljata view of the MIX-6 USB mixer, showing the layout of input channels, microphone controls, and master section.

Figura 3.4: Rear panel of the MIX-6 USB mixer, displaying various input and output connections including XLR master outputs, RCA inputs, and USB port.

4. Setup

4.1 Spakkjar u Spezzjoni

Carefully remove the mixer from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. If any damage is found, contact your dealer immediately.

4.2 Qawwa tal-Konnessjoni

Connect the provided power cable to the AC MAINS input on the rear panel of the mixer and then to a suitable grounded electrical outlet. Ensure the power switch is in the OFF position before connecting.

4.3 Konnessjonijiet tal-Awdjo

The MIX-6 USB offers various input and output options:

• Input Channels (1-4): Connect your audio sources (CD players, turntables, media players) to the RCA LINE or PHONO inputs on the rear panel. Ensure the correct input type (LINE/PHONO) is selected via the switch on the top panel for each channel.
• Microphone Inputs (MIC 1, MIC 2): Connect dynamic microphones to the XLR/TRS combo jacks on the rear panel.
• Front Panel Input: Use the 3.5mm stereo input on the front panel for quick connection of portable devices.
• Outputs ewlenin: Connect your main sound system to the MASTER OUTPUTs. Master 1 offers balanced XLR outputs for professional connections, while Master 2 provides unbalanced RCA outputs.
• Output tal-Kabina: Connect your monitor speakers to the BOOTH output (RCA).
• Rekord Output: Use the RECORD output (RCA) to connect to a recording device.

4.4 Konnessjoni USB

Connect the mixer to your computer using a standard USB cable. The MIX-6 USB functions as a bidirectional audio interface, allowing you to play audio from your computer through the mixer and record the mixer's output to your computer simultaneously. No special drivers are typically required for most operating systems.

5. Istruzzjonijiet Operattivi

5.1 Tixgħel/Jitfi

After all connections are made, switch the power button on the rear panel to the ON position. Always power on your mixer before amplifiers and power off amplifiers before the mixer to prevent speaker damage.

5.2 Kontrolli tal-Kanal

• QLIGĦ: Adjusts the input sensitivity for each channel. Set this so the peak indicator occasionally flashes during the loudest parts of the audio.
• EQ (GĦOLJA, MIDJA, BASSA): Adjusts the treble, mid-range, and bass frequencies for each channel.
• FADER: Controls the volume level of each channel.
• CUÉ: Activates pre-fader listening (PFL) for the channel, allowing you to monitor the audio through headphones without it being sent to the main output.

5.3 Tħaddim tal-Mikrofonu

The MIX-6 USB features two dedicated microphone channels:

• LIVELL: Jaġġusta l-volum tal-mikrofonu.
• EQ (GĦOLJA, MIDJA, BASSA): Adjusts the tone of the microphone signal.
• Swiċċ mixgħul / mitfi: Activates or deactivates the microphone.
• TALKOVER: When activated, this feature automatically ducks the music volume when you speak into the microphone, making your voice more prominent. The ducking level is adjustable.

5.4 Crossfader Usage

The 45mm dual-rail crossfader allows for smooth transitions between channels assigned to its A and B sides. Use the CF ASSIGN switches to assign channels to either side of the crossfader. The CF SLOPE control adjusts the crossfader curve, from a smooth fade to a sharp cut.

5.5 Master Output and Monitoring

• LIVELL MASTER: Controls the overall output volume of the mixer.
• BOOTH LEVEL: Adjusts the volume for your monitor speakers connected to the Booth output.
• CUE VOLUME: Jaġġusta l-volum tal-ħruġ tal-headphones.
• CUE MIX/SPLIT: Allows you to blend the CUE signal with the master output in your headphones (MIX) or split them between left and right ears (SPLIT).
• VU METRI: Display the output level of the master signal. Use the CUE/MASTER switch to monitor either the pre-fader cue signal or the master output.

6. Manutenzjoni

6.1 Tindif

Regularly clean the exterior of the mixer with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish and controls. Ensure the unit is powered off and unplugged before cleaning.

6.2 Fader Care

The faders are precision components. Avoid spilling liquids on them. If faders become stiff or noisy, specialized fader lubricant sprays can be used, but it is recommended to consult a qualified technician for proper application.

6.3 Ħażna

When not in use for extended periods, store the mixer in a dry, dust-free environment, preferably in its original packaging or a protective case.

7 Issolvi l-problemi

If you encounter issues with your MIX-6 USB mixer, refer to the following common problems and solutions:

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For detailed warranty information, technical support, and service inquiries, please refer to the official JBSYSTEMS webis-sit jew ikkuntattja lin-negozjant awtorizzat tiegħek. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.