Manwal tal-Utent tar-Reġistratur tal-Metronomu tat-Tunner Korg TMR-50

Introduzzjoni

The Korg TMR-50 is a versatile device designed to assist musicians in improving their pitch and rhythm. It integrates a tuner, metronome, and recorder into a single compact unit. These three functions can be used independently or simultaneously, offering comprehensive support for practice and performance. The TMR-50 also features high-quality linear PCM recording, allowing up to 100 tracks to be stored, and a USB port for easy data transfer to a computer. With its built-in microphone, speaker, and various rhythm variations, the TMR-50 is an essential tool for any musician.

Prekawzjonijiet tas-Sigurtà

• Do not expose the unit to extreme temperatures, direct sunlight, high humidity, or dusty environments.
• Evita li twaqqa' l-unità jew li tissottomettiha għal impatti qawwija.
• Tippruvax tiżżarma jew timmodifika l-unità. Irreferi kull servizz lil persunal kwalifikat.
• Uża biss it-tip ta' batterija speċifikat (AAA) u kun żgur li l-polarità tkun korretta waqt l-installazzjoni.
• Neħħi l-batteriji jekk l-unità ma tkunx se tintuża għal perjodu estiż biex tevita t-tnixxija.
• Keep the unit away from sources of strong electromagnetic interference.

Kontenut tal-Pakkett

Jekk jogħġbok kun żgur li l-oġġetti kollha li ġejjin huma preżenti fil-pakkett tiegħek:

• Korg TMR-50 Tuner Metronome Recorder unit
• 2 x AAA batteries (for initial use)
• Manwal għall-Utent (dan id-dokument)

Ismijiet tal-Partijiet u Funzjonijiet

Figura 1: Bord ta 'quddiem fuqview of the Korg TMR-50, showing all controls and the display.

Kontrolli tat-tuner

• TUNER ON Button: Activates or deactivates the tuner function.
• CALIB Button: Adjusts the calibration frequency (standard is 440Hz, often adjustable to 442Hz as shown).
• NOTE Buttons (Up/Down Arrows): Selects the target note for tuning.
• Buttuna tal-ĦOSS: Activates the Sound Out function, which outputs a reference tone from the internal speaker.
• SOUND BACK Button: Engages the Sound Back function, allowing the unit to detect the input pitch and output the closest correct pitch for comparison.

Kontrolli tal-metronomi

• METRONOME ON Button: Activates or deactivates the metronome function.
• VOL (Volume) Slider: Adjusts the output volume of the metronome and other audio.
• BEAT Buttons (Up/Down Arrows): Adjusts the number of beats per measure.
• TEMPO Buttons (Up/Down Arrows): Adjusts the metronome tempo in beats per minute (BPM).
• Buttuna TAP TEMPO: Allows you to set the tempo by tapping the button in time with the desired beat.

Recorder Controls

• RECORDER ON Button: Activates the recorder function.
• REC Button (Red Dot): Initiates recording when the recorder is active.
• Buttuna OK: Jikkonferma selezzjonijiet jew azzjonijiet.
• Rewind/Fast Forward Buttons (Double Arrows): Navigates through recorded tracks or within a track.
• Play/Pause Button (Triangle/Two Vertical Bars): Starts or pauses playback of a recorded track.
• Stop Button (Square): Jieqaf daqq jew reġistrazzjoni.
• A<->B Button: Sets a loop playback region within a recorded track.
• Buttuna Ħassar: Deletes selected recorded tracks.
• Buttuna START/STOP: A general control for starting and stopping various functions, including recording and metronome.

Display u Indikaturi

• Display LCD: Shows tuning information (note, cent deviation, calibration), metronome tempo and beat, and recorder track number and status.
• Flat (b) / Sharp (#) Indicators: Lights up to indicate if the detected pitch is flat or sharp.
• Dawl Indikatur Aħdar: Illuminates when the detected pitch is in tune.

Input/Output and Other Features

• MIC (Mikrofonu): Built-in microphone for recording and tuning.
• PHONES (Headphone Jack): Output for connecting headphones.
• Jack INPUT: Input for connecting an external microphone or instrument pickup.
• Port USB: For connecting to a computer to transfer recorded data.
• Kelliem: Built-in speaker for metronome clicks, reference tones, and playback.

Setup

Installazzjoni tal-batterija

1. Iftaħ l-għatu tal-kompartiment tal-batterija fuq wara tal-unità.
2. Daħħal żewġ (2) batteriji AAA, waqt li tiżgura l-polarità korretta (+/-) kif indikat ġewwa l-kompartiment.
3. Agħlaq l-għatu tal-kompartiment tal-batterija sew.

Qawwa mixgħul/mitfi

• Biex tixgħel, agħfas u żomm il-buttuna TUNER ON or METRONOME ON buttuna għal madwar sekonda.
• Biex tintefa, agħfas u żomm il-buttuna TUNER ON or METRONOME ON button again for approximately one second. The unit will also automatically power off after a period of inactivity to conserve battery life.

Tħaddim tat-Tuner

1. Agħfas il- TUNER ON button to activate the tuner. The display will show tuning information.
2. Adjust the calibration frequency using the CALIB button if needed. The default is typically 440Hz, but can be set to 442Hz or other values.
3. Play a single note on your instrument. The TMR-50 will detect the pitch via its built-in microphone or an external input.
4. Osserva l-wiri:
   • L-isem tan-nota se jintwera.
   • The meter indicates pitch deviation. Adjust your instrument until the meter is centered and the green indicator light illuminates.
   • The 'b' (flat) or '#' (sharp) indicators will light up if the pitch is significantly off.
5. Uża l- ĦOSS button to output a reference pitch for ear training.
6. Involvi l- SOUND BACK function to hear the closest correct pitch while you play, aiding in intonation practice.

Operating the Metronome

1. Agħfas il- METRONOME ON button to activate the metronome.
2. Aġġusta t-tempo billi tuża l- TEMPO Up/Down arrow buttons. The tempo range is typically from 30 to 252 BPM.
3. Set the desired beat pattern using the TAĦĦAT Up/Down arrow buttons. This controls the number of beats per measure and rhythm variations.
4. Inkella, uża l- TAPP TEMPO button to set the tempo by tapping it at your desired speed.
5. Agħfas il- BIDU/WAQQF button to begin or end the metronome click.
6. Adjust the metronome volume using the VOL slider.

Tħaddim tar-Reġistratur

1. Agħfas il- RECORDER ON button to enable the recording function.
2. Biex tibda tirrekordja, agħfas il- REC button (red dot). The display will show "REC" and the track number.
3. Play your instrument or sing into the built-in microphone.
4. Biex tieqaf tirrekordja, agħfas STOP buttuna.
5. To play back a recorded track:
   • Use the Rewind/Fast Forward buttons to select the desired track.
   • Agħfas il- Play/Pawsa buttuna biex tibda d-daqq.
   • Agħfas il- STOP buttuna biex ittemm il-plejbek.
6. To use the Loop Play function:
   • Waqt id-daqq, agħfas il- A<->B button at the desired start point (A).
   • Agħfas il- A<->B button again at the desired end point (B). The section between A and B will loop continuously.
   • Agħfas A<->B a third time to cancel the loop.
7. To delete a track:
   • Select the track you wish to delete using the Rewind/Fast Forward buttons.
   • Agħfas il- Ħassar buttuna.
   • Confirm the deletion if prompted (usually by pressing OK).

Konnessjoni ma' Kompjuter

The TMR-50 features a USB port for transferring recorded audio files to your computer. Connect the unit to your computer using a standard USB cable (not included). The device should appear as a removable storage device, allowing you to copy files. Refer to your computer's operating system instructions for managing external storage devices.

Manutenzjoni

• Naddaf l-unità b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif jew solventi li joborxu.
• If the unit will not be used for an extended period, remove the batteries to prevent leakage and corrosion.
• Store the unit in a cool, dry place away from direct sunlight.

Issolvi l-problemi

Speċifikazzjonijiet

Garanzija u Appoġġ

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Korg website. Keep your proof of purchase for warranty claims. Do not attempt to repair the unit yourself, as this may void your warranty.

Korg Uffiċjali Websit: www.korg.com