1. Introduzzjoni
This manual provides essential information for the safe and effective use of your XTERRA FS2.5 Elliptical Trainer. Please read all instructions carefully before assembly and operation. Retain this manual for future reference.
Image: A person exercising on the XTERRA FS2.5 Elliptical Trainer, demonstrating its full form and usage.
2. Informazzjoni Importanti dwar is-Sigurtà
- Ikkonsulta tabib qabel tibda kwalunkwe programm ta 'eżerċizzju.
- Żomm it-tfal u l-annimali domestiċi 'l bogħod mit-tagħmir waqt it-tħaddim.
- Poġġi l-ellittika fuq wiċċ ċatt u stabbli.
- Kun żgur li l-boltijiet u l-ġewż kollha huma ssikkati sew qabel kull użu.
- Kapaċità massima tal-piż tal-utent: 300 lbs (136 kg).
- Uża biss kif indikat f'dan il-manwal.
3. Setup u Assemblea
3.1 Żpakkjar u Kontroll tal-Komponenti
Carefully remove all components from the packaging. Verify that all parts listed in the assembly guide (included with the product) are present. The package includes the elliptical trainer, assembly parts, and this manual.
3.2 Assemblea
Follow the step-by-step instructions provided in the separate assembly manual. Ensure all connections are secure. Assembly typically requires two hours. It is recommended to have assistance during assembly.
3.3 Tqegħid u Livellar
Place the elliptical on a firm, level surface. Use the rear spin-out levelers to ensure the machine is stable and does not wobble. Adjust them by turning until all contact points are firm on the floor.
Image: A hand adjusting the rear spin-out leveler on the elliptical trainer to ensure stability.
3.4 Konnessjoni tal-Enerġija
Connect the 110V power adapter to the elliptical and then to a standard wall outlet. The power input port is typically located at the rear base of the machine.
3.5 Moving the Unit
The elliptical is equipped with front transport wheels for easy mobility. To move, carefully lift the rear of the unit and roll it to the desired location.
4. Istruzzjonijiet Operattivi
4.1 Konsola Fuqview
The XTERRA FS2.5 features a large 5-inch x 2.5-inch dual-color backlit LCD display. This display shows workout data such as time, distance, calories, speed, and heart rate. The console also includes an audio jack and speakers for connecting an MP3 player.
Immaġni: Dettaljata view of the elliptical's console, highlighting the LCD screen, control buttons (Start, Stop, Up, Down, Mode, Enter, Recovery), and accessory tray.
4.2 Tibda Taħriġ
- Step onto the oversized pedals.
- Grasp the moving handlebars or the fixed handlebars with pulse sensors.
- Agħfas il- BIDU button to begin a manual workout, or select a program.
4.3 Workout Programs and Resistance
The FS2.5 offers 24 livelli ta 'reżistenza manjetika and a variety of workout programs:
- 12 programmi ssettjati minn qabel
- 4 programmi tar-rata tal-qalb
- 1 programm xaħam tal-ġisem
- 1 watt program
- 4 programmi definiti mill-utent
- 1 target heart rate program
- Programm manwali
Uża l- UP u 'L isfel buttons to adjust resistance levels or navigate program selections. The elliptical can be used in both forward and reverse directions to engage different muscle groups.
Image: A person using the elliptical, with text indicating the availability of 24 different programs and 24 levels of resistance.
4.4 Monitoraġġ tar-Rata tal-Qalb
The elliptical includes hand grip pulse sensors on the fixed handlebars. Grasp these sensors during your workout to monitor your heart rate. A built-in receiver also supports a chest strap (not included) for continuous heart rate monitoring.
Image: Close-up of hands holding the hand grip pulse sensors on the elliptical's handlebars.
4.5 Ergonomija
The FS2.5 features an ergonomic 14-inch stride length for a comfortable motion. The oversized pedals provide a secure, non-slip surface during your workout.
Immaġni: View of the elliptical's lower section, emphasizing the ergonomic 14-inch stride length and pedal design.
Immaġni: Dettaljata view of the oversized foot pedals, designed for a secure, non-slip surface.
5. Manutenzjoni
The XTERRA FS2.5 Elliptical Trainer is designed for low maintenance due to its friction-free magnetic resistance system and sealed premium bushings. Regular maintenance helps ensure longevity and optimal performance.
- Tindif: Imsaħ il-magna bl-adamp Ċarruta wara kull użu biex tneħħi l-għaraq u t-trab. Evita prodotti tat-tindif li joborxu.
- Spezzjoni: Periodically inspect all bolts, nuts, and moving parts for tightness. Tighten any loose fasteners.
- Lubrikazzjoni: While the magnetic resistance system is maintenance-free, some pivot points may benefit from occasional lubrication with a silicone-based lubricant if squeaking occurs. Refer to the assembly manual for specific pivot points.
6 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ħsejjes ta’ tgergir jew mhux tas-soltu | Loose bolts or lack of lubrication at pivot points. | Inspect and tighten all assembly bolts, especially those connecting the console to the lower frame. Apply silicone lubricant to pivot points if necessary. |
| Belt slipping or dislodging | Improper belt tension or internal component issue. | Refer to the assembly manual for instructions on adjusting belt tension. If the issue persists, contact customer support. |
| Console not powering on or displaying correctly | Power adapter not connected, loose wiring, or power outlet issue. | Ensure the 110V power adapter is securely plugged into the elliptical and a working wall outlet. Check all console wiring connections for looseness. |
| Il-magna tħossha instabbli jew titħarrek | Uneven floor surface or unadjusted levelers. | Adjust the rear spin-out levelers until the machine is stable on the floor. Ensure the elliptical is placed on a flat surface. |
7. Speċifikazzjonijiet
- Mudell: FS2.5
- Ditta: XTERRA
- Product Dimensions (LWH): 51 x 24 x 63 pulzieri (129.54 x 60.96 x 160.02 ċm)
- Piż immuntat: 103.6 lbs (46.9 kg)
- Kapaċità massima tal-piż tal-utent: 300 lbs (136 kg)
- Tul tal-pass: 14 pulzieri
- Piż tal-flywheel: 22 lbs
- Sistema ta' Reżistenza: Manjetiku
- Livelli ta' Reżistenza: 24
- Wiri: 5-inch x 2.5-inch Dual Color Backlit LCD
- Programmi: 24 (12 preset, 4 HR, 1 body fat, 1 watt, 4 user-defined, 1 target HR, manual)
- Monitoraġġ tar-Rata tal-Qalb: Hand grip pulse sensors, built-in receiver for chest strap (not included)
- Rekwiżit ta' Enerġija: 110V AC
- Materjal: Heavy duty steel frame with metallic black powder coated rustproof finish
Image: A diagram illustrating the assembled dimensions of the XTERRA FS2.5 Elliptical Trainer: 51 inches (length), 24 inches (width), and 63 inches (height).
8. Informazzjoni dwar Garanzija
The XTERRA FS2.5 Elliptical Trainer comes with the following limited warranty:
- Qafas: 5 snin
- Partijiet: 1 sena
For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official XTERRA Fitness websit.
9. Appoġġ għall-Klijent
If you have any questions, require assistance with assembly, operation, or troubleshooting, or need to claim warranty service, please contact XTERRA Fitness customer support. You can typically find contact information on the XTERRA Fitness webis-sit jew fid-dokumentazzjoni pprovduta mal-prodott tiegħek.
Għal aktar informazzjoni, żur il- XTERRA Store on Amazon.
