Introduzzjoni
This manual provides instructions for the installation and maintenance of the Eureka Victory Upright Vacuum Cleaner Belt (Model 61120G). This replacement belt is designed to restore optimal brushroll performance to your Eureka Victory upright vacuum cleaner.
Image: A pack containing three replacement belts for Eureka Victory upright vacuum cleaners. The belts are black, flat, and made of rubber, designed to drive the brushroll.
Kompatibilità
This belt is compatible with a wide range of Eureka Victory Upright Vacuum Cleaner models. Please verify your vacuum's model number against the list below to ensure proper fit:
- Eureka WHF-9
- Eureka 4300, 4325AT, 4372AT
- Eureka 4331, 4333A, 4335AT, 4336ATHE
- Eureka 4351A, 4377ATV, 4380AT, 4381AT, 4383AT, 4386AT, 4387AT, 4388AT, 4388BT
- Eureka 4390A, 4393A
- Eureka 4440A, 4455AT, 4484A, 4459AS, 4460AT, 4462AT, 4463AV, 4464AT, 4465AT, 4467AV, 4468A, 4468A-1, 4469AT, 4470AT, 4471AT, 4472AT, 4472BT, 4472BT-1, 4475AT, 4476T, 4480AT, 4481AT, 4485AT, 4488AT, 4489AT
- Eureka 4495, 4495A-1, 4496AV, 4499A, 4499B
If your model is not listed, please consult your vacuum cleaner's original manual or contact Eureka customer support for compatibility information.
Istruzzjonijiet għall-installazzjoni
Replacing the brushroll belt is a common maintenance task. Always ensure the vacuum cleaner is unplugged before performing any maintenance or installation procedures to prevent electric shock or injury.
- Is-Sigurtà l-Ewwel: Qabbad il-vacuum cleaner mill-iżbokk elettriku.
- Access the Brushroll: Turn the vacuum cleaner over so the brushroll is accessible. You may need to remove a bottom plate or cover. This usually involves unscrewing several screws.
- Neħħi ċ-Ċinturin il-Qadim: Carefully remove the brushroll. Locate the old belt, which will likely be stretched, worn, or broken. Remove it from both the motor shaft and the brushroll.
- Installa Ċinturin Ġdid: Loop the new belt around the motor shaft. Then, stretch the belt around the brushroll. Ensure the belt is centered and not twisted.
- Reinstall Brushroll: Place the brushroll back into its housing, ensuring the belt remains properly seated on both the motor shaft and the brushroll. Spin the brushroll manually a few times to confirm the belt is correctly aligned and moves freely.
- Kopertura Sikura: Reattach any covers or bottom plates that were removed, securing them with screws.
- Test: Plug the vacuum cleaner back in and test its operation. The brushroll should spin freely and effectively.
Refer to your specific vacuum cleaner model's user manual for detailed diagrams and instructions, as procedures may vary slightly.
Manutenzjoni
Regular inspection of your vacuum belt can extend its lifespan and maintain cleaning performance.
- Spezzjona regolarment: Check the belt every 3-6 months, or if you notice a decrease in brushroll performance or a burning smell.
- Sinjali ta' Użu: Replace the belt if it appears stretched, cracked, frayed, or if the brushroll stops spinning.
- Brushroll Cleaning: Keep the brushroll free of tangled hair, threads, and debris, as this can put extra strain on the belt and motor.
Issolvi l-problemi
If your vacuum's brushroll is not functioning correctly after belt replacement, consider the following:
- Ir-romblu tal-pinzell mhux qed idur:
- Ensure the new belt is correctly installed and not twisted.
- Check for any obstructions in the brushroll housing or tangled around the brushroll itself.
- Verify the brushroll is properly seated in its bearings.
- Riħa ta' Ħruq:
- Immediately unplug the vacuum.
- This often indicates a slipping belt or an overloaded brushroll. Check for obstructions.
- If the belt is new, ensure it's the correct size and tension.
- Belt Breaks Quickly:
- Ensure the brushroll is not jammed or difficult to turn manually.
- Verify you are using the correct belt type and size for your specific vacuum model.
If issues persist, consult a qualified service technician or Eureka customer support.
Speċifikazzjonijiet
| Numru tal-Mudell | 61120G |
| Brand | Eureka |
| Materjal | Lastiku |
| Stil taċ-Ċinturin | Ċinturin Ċatt |
| Apparati Kompatibbli | Eureka Victory Upright Vacuum Cleaners |
| Kulur | Iswed |
| Kontenut tal-Pakkett | 3 Belts per pack |
| Piż tal-oġġett | 1.13 uqija |
| Dimensjonijiet tal-Pakkett | 5.83 x 4.57 x 1.34 pulzieri |
Garanzija u Appoġġ
For specific warranty information regarding your Eureka Victory Upright Vacuum Cleaner Belt, please refer to the documentation provided with your original vacuum cleaner or visit the official Eureka website. For further assistance or technical support, please contact Eureka customer service.
Eureka Official Websit: www.eureka.com
