Kuryakyn 3233 LED Trunk Accent Swoops Instruction Manual

1. Prodott Aktarview

The Kuryakyn 3233 LED Trunk Accent Swoops are designed to integrate seamlessly with your Honda Gold Wing GL1800, enhancing its rear lighting. These LED accents function as both running lights and turn signals, contributing to increased visibility and a refined aesthetic.

Figure 1: Kuryakyn 3233 LED Trunk Accent Swoops

2. Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

• 1x Chrome Right Trunk Accent Swoop
• 1x Chrome Left Trunk Accent Swoop
• 1x “Y” Run-Brake Harness
• 1x Double “Y” Adapter
• 6x 4" Black Nylon Cable Ties
• 2x Alcohol Pads
• 1x Dielectric Grease Pack

Nota: Installation may require additional tools not included in this package, such as a set of metric hex wrenches, a rattail file, masking tape, and a non-permanent marker.

3. Kompatibilità

These LED Trunk Accent Swoops are compatible with Honda Gold Wing GL1800 models from 2006 to 2017, with the exception of F6B models. Some installations may require a separate rear accessory light adapter (not included).

4. Istruzzjonijiet ta 'installazzjoni

Before starting, ensure the motorcycle's ignition is off and the battery is disconnected to prevent electrical shorts. Always refer to your motorcycle's service manual for specific panel removal and wiring diagrams.

Gwida Pass Pass

1. Ipprepara ż-Żona tal-Installazzjoni: Carefully remove any necessary panels or existing lighting components from the motorcycle's trunk area to access the wiring and mounting points.
2. Qabbad l-Arness tal-Wajring: Utilize the provided “Y” Run-Brake Harness and Double “Y” Adapter to connect the LED Trunk Accent Swoops to the motorcycle's existing wiring. Ensure all connections are secure and properly insulated, using dielectric grease as needed.
3. Funzjonalità tat-Test: Before final assembly, temporarily reconnect the battery and test the running light and turn signal functions of the newly connected accent swoops. Verify that all LEDs illuminate correctly and respond to turn signal inputs.
4. Secure the Accent Swoops: Carefully position the LED Trunk Accent Swoops onto the motorcycle's trunk. Secure them using appropriate fasteners or adhesive as per the product design. Ensure a snug fit and proper alignment.
5. Assemblea Finali: Reinstall any panels or components that were removed during the initial preparation. Ensure all screws and fasteners are tightened to the manufacturer's specifications.

Figure 2: Installed LED Trunk Accent Swoops (Close-up)

Figura 3: Wara View with Illuminated Accent Swoops

5. Operazzjoni

Once installed, the Kuryakyn 3233 LED Trunk Accent Swoops will operate in conjunction with your motorcycle's existing lighting system. They are designed to function as:

• Dwal tat-Tmexxija: Providing continuous illumination when the motorcycle's lights are on.
• Sinjali tad-dawran: Flashing in sync with your motorcycle's turn signals to indicate directional changes.

6. Manutenzjoni

To ensure the longevity and optimal performance of your LED Trunk Accent Swoops, follow these maintenance guidelines:

• Tindif: Clean the accent swoops regularly with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals that could damage the chrome finish or LED lenses.
• Spezzjoni: Periodically inspect the wiring connections for any signs of wear, corrosion, or looseness. Ensure the accent swoops remain securely mounted.
• Waterproofing: The product is designed to be waterproof. However, avoid directing high-pressure water sprays directly at the LED units or wiring connections during washing.

7 Issolvi l-problemi

If you experience issues with your Kuryakyn 3233 LED Trunk Accent Swoops, consider the following:

• Dwal Mhux Ixgħelu: Check all electrical connections for proper seating and continuity. Verify that the motorcycle's fuses are intact. Ensure the battery is fully charged and properly connected.
• Incorrect Flashing (Turn Signals): If turn signals flash too quickly or too slowly, it may indicate an issue with the motorcycle's flasher relay or a load imbalance. Consult a qualified technician if this persists.
• Dim or Intermittent Lighting: Inspect wiring for damage or loose connections. Ensure no moisture has entered the electrical components.

For persistent issues, contact Kuryakyn customer support or a certified motorcycle technician.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For information regarding product warranty, returns, or technical assistance, please contact Kuryakyn customer support directly. Details can typically be found on the official Kuryakyn websit jew permezz tal-bejjiegħ tal-prodott tiegħek.