Belimo AFBUP Damper Manwal ta' Istruzzjoni tal-Attwatur

1. Introduzzjoni u Fuqview

This manual provides detailed instructions for the installation, operation, and maintenance of the Belimo AFBUP Damper Actuator. The AFBUP series actuators are designed for reliable fail-safe operation in HVAC systems, ensuring positive close-off on air-tight dampers

Il-karatteristiċi ewlenin jinkludu:

• Spring return mechanism for fail-safe control.
• Designed for on/off control of dampers in HVAC systems.
• Operates on 24 to 240 VAC power supply.
• Provides 95° of rotation with a graduated position indicator.
• Can be stalled at any point in its normal rotation without mechanical end switches.
• Shipped at +5° from full fail-safe for automatic compression against damper gaskets.

2. Informazzjoni dwar is-Sigurtà

Please read these instructions carefully before installing, operating, or servicing the Belimo AFBUP Damper Actuator. Failure to follow these instructions may result in property damage, injury, or death.

• L-installazzjoni u l-wajers għandhom isiru minn persunal kwalifikat skont il-kodiċijiet elettriċi lokali u nazzjonali kollha.
• Disconnect power before installation or servicing to prevent electrical shock.
• Ensure the actuator is securely mounted to the damper xaft.
• Tħaddimx l-attwatur lil hinn mill-volum speċifikat tiegħutage range (24 to 240 VAC).
• Ipproteġi l-attwatur mill-umdità u minn temperaturi estremi.

3. Komponenti tal-Prodott

The Belimo AFBUP Damper Actuator package typically includes the following components:

Figure 3.1: Belimo AFBUP Damper Actuator. This image displays the main AFBUP actuator unit, an orange-colored device with a visible gear mechanism and a graduated position indicator. It includes an attached electrical cable with a 1/2" conduit connector. Also shown are various mounting accessories: a black crank handle, a long bolt, a flat metal bracket, and a small nut, along with a separate metal mounting plate with multiple holes.

• Belimo AFBUP Damper Actuator Unit
• Mounting Bracket/Hardware
• Electrical Cable (3', 18 Ga Appliance Cable)
• 1/2" Conduit Connector

4. Installazzjoni

1. Kontroll ta' qabel l-Installazzjoni: Żgura li damper shaft is clean and free of obstructions. Verify that the actuator's torque rating matches the damper requirements.
2. Immuntar tal-Attwatur:
   • Pożizzjona l-attwatur fuq id-damper xaft.
   • Secure the actuator using the provided mounting bracket and hardware. Ensure a firm, stable connection to prevent slippage.
   • The actuator can be mounted in any position relative to the damper xaft.
3. Wiring:
   • Disconnect all power to the circuit before wiring.
   • Connect the actuator's electrical cable to the power supply (24 to 240 VAC) according to local electrical codes and the wiring diagram provided with the product.
   • Utilize the 1/2" conduit connector for secure and compliant wiring.
   • Kun żgur li l-konnessjonijiet kollha huma ssikkati u iżolati.
4. Test Funzjonali: After installation and wiring, restore power and perform a functional test to ensure the actuator operates correctly and the damper moves through its full range of motion.

5. Istruzzjonijiet Operattivi

The Belimo AFBUP is an on/off, spring return actuator. Its operation is straightforward:

• Qawwa Mixgħul: When power (24 to 240 VAC) is applied to the actuator, it will drive the damper to its open or closed position, depending on the wiring configuration.
• Power Off (Fail-Safe): Upon loss of power, the internal spring mechanism will automatically return the damper to its pre-set fail-safe position (typically fully open or fully closed). This ensures critical system response during power outages.
• Indikazzjoni tal-Pożizzjoni: The graduated position indicator on the actuator provides a visual reference of the damper's current position, ranging from 0° to 95°.
• Override Manwali (jekk applikabbli): If equipped with a manual override, refer to specific product documentation for instructions on disengaging the motor and manually positioning the damper.

6. Manutenzjoni

The Belimo AFBUP Damper Actuator is designed for long-term, maintenance-free operation. However, periodic checks are recommended to ensure optimal performance:

• Spezzjoni Viżwali: Annually inspect the actuator for any signs of physical damage, loose connections, or corrosion.
• Integrità tal-Wiring: Check electrical connections for tightness and ensure insulation is intact.
• DampOperazzjoni: Ivverifika li damper moves freely and fully without binding. Ensure the actuator's rotation matches the damper's range.
• Tindif: Keep the exterior of the actuator clean and free of dust or debris. Do not use abrasive cleaners or solvents.

7 Issolvi l-problemi

For issues not listed above or if troubleshooting steps do not resolve the problem, please contact Belimo technical support.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information, technical support, or service inquiries regarding your Belimo AFBUP Damper Actuator, please refer to the official Belimo website or contact your authorized Belimo distributor. Keep your purchase receipt for warranty claims.