1. Introduzzjoni
This manual provides detailed instructions for the installation, operation, and maintenance of your Moen Modern S665SRS Wall Mount Pot Filler. Designed for convenience and efficiency, this double-jointed kitchen faucet allows for direct filling of pots on your stovetop, eliminating the need to transport heavy, water-filled cookware from the sink.
2. Informazzjoni dwar is-Sigurtà
- Dejjem itfi l-provvista prinċipali tal-ilma qabel tibda kwalunkwe installazzjoni jew manutenzjoni.
- Kun żgur li l-konnessjonijiet kollha huma sikuri biex tevita t-tnixxijiet.
- Tużax prodotti tat-tindif li joborxu jew kimiċi ħarxa fuq il-finitura tal-faucet.
- Jekk m'intix ċert dwar xi passi tal-installazzjoni, ikkonsulta plamer kwalifikat.
3. Prodott Aktarview
The Moen Modern S665SRS Pot Filler features a sleek design with practical functionality. Its dual-jointed swing arm provides an extended reach, making it suitable for various stovetop configurations. The Spot Resist Stainless finish helps maintain a clean appearance by resisting fingerprints and water spots.
Figure 1: Moen Modern S665SRS Wall Mount Pot Filler, showcasing its dual-jointed design and Spot Resist Stainless finish.
4. Installazzjoni
4.1. Qabel ma Tibda
Ensure you have the following tools and materials:
- Wrench aġġustabbli
- Pipe sealant tape
- Drill (if needed for mounting)
- Livell
- Nuċċalijiet tas-sigurtà
Verify all components are present in the package before starting installation.
4.2. Mounting the Pot Filler
- Itfi l-provvista prinċipali tal-ilma fil-kċina tiegħek.
- Determine the optimal mounting location above your stovetop, ensuring the arm can reach all burners when extended.
- Mark the mounting holes on the wall using the pot filler's base plate as a template.
- Drill pilot holes if necessary and secure the mounting plate to the wall using appropriate fasteners.
- Apply pipe sealant tape to the threaded water supply pipe extending from the wall.
- Attach the pot filler assembly to the mounting plate and connect it to the water supply. Tighten all connections securely.
- Iftaħ il-provvista prinċipali tal-ilma bil-mod u ċċekkja għal xi tnixxijiet.
Figure 2: The Moen pot filler in an installed kitchen setting, demonstrating its functionality over a pot on the stove.
5. Operazzjoni
5.1. L-Estensjoni u l-Irtirar tad-Driegħ
The pot filler features a dual-jointed swing arm for maximum reach. Gently pull the arm away from the wall to extend it over your desired pot. The joints are designed to move smoothly and hold their position. To retract, simply push the arm back towards the wall until it folds neatly against the backsplash.
5.2. Water Flow Control
The Moen S665SRS pot filler is equipped with two handles for water control:
- Base Handle: Located near the wall, this handle controls the primary water flow to the faucet. Turn it to the ON position to allow water to reach the spout.
- Spout Handle: Located at the end of the arm, this handle controls the final water flow from the spout. Turn it to the ON position to dispense water into your pot.
Both handles must be in the ON position for water to flow. This dual-handle design provides an extra layer of control and helps prevent accidental drips or leaks.
Figure 3: The two-handle lever design allows for precise water flow adjustment, making it simple to fill pots quickly and efficiently.
6. Manutenzjoni
6.1. Cleaning the Finish
The Spot Resist Stainless finish is designed to resist fingerprints and water spots. To clean, simply wipe the surface with a soft, damp cloth. For tougher spots, use a mild soap and water solution, then rinse thoroughly and dry with a soft cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
Figure 4: Spot Resist Technology helps keep your faucet looking cleaner by resisting fingerprints and water spots.
6.2. Kura Ġenerali
- Regularly check all connections for tightness to prevent leaks.
- Ensure the arm moves freely and smoothly. If it becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points.
7 Issolvi l-problemi
| Ħruġ | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-ilma ma jgħaddix | One or both handles are closed; main water supply is off. | Ensure both the base and spout handles are in the ON position. Check the main water supply. |
| Tnixxija mill-konnessjonijiet | Loose connections; worn out seals. | Tighten connections. If leaking persists, replace seals or consult a plumber. |
| Arm sags or is loose | Pivot point fasteners are loose. | Tighten the hex bolt under the cap at the pivot point (refer to installation diagrams if available). |
| Fluss ta 'ilma baxx | Debris in the aerator or supply line. | Remove and clean the aerator. Flush the supply lines if necessary. |
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Moen |
| Isem tal-Mudell | Modern Pot Filler |
| Numru tal-Mudell | S665SRS |
| Temm | Spot Resist Stainless |
| Materjal | Metall |
| Tip ta 'Immuntar | Mount Wall |
| Jilħaq spout | Sa 24-3/8 pulzieri |
| Rata massima tal-fluss | 5.5 Galloni Fil-Minuta |
| Numru ta 'Mankijiet | 2 |
9. Garanzija u Appoġġ
The Moen Modern S665SRS Pot Filler is backed by Moen’s Limited Lifetime Warranty. This warranty covers defects in material and manufacturing workmanship for the original consumer purchaser. For detailed warranty information or technical support, please refer to the official Moen webis-sit jew ikkuntattja lis-servizz tal-klijenti ta' Moen direttament.
Għal aktar għajnuna, żur il- Moen Store.
