Introduzzjoni
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Kwikset 690DL Delta Keyed Leverset and Single Cylinder Deadbolt Combo Pack. Please read these instructions carefully before installation and retain them for future reference.
Prodott Overview
The Kwikset 690DL combo pack includes a keyed leverset and a single cylinder deadbolt, designed for exterior doors requiring both keyed entry and additional security. The leverset provides basic entry and exit functionality, while the deadbolt offers enhanced security with a separate key mechanism.
Stampa 1: Quddiem view of the Kwikset 690DL Delta Keyed Leverset and Single Cylinder Deadbolt Combo Pack, showing the exterior components in satin chrome finish.
Immaġni 2: Intern view of the Kwikset 690DL Delta Leverset and Single Cylinder Deadbolt, showing the thumb-turn for the deadbolt and the lever handle.
Image 3: Close-up of the two Kwikset keys included with the 690DL lock set.
Setup u Installazzjoni
Before beginning installation, ensure you have the necessary tools, which typically include a Phillips head screwdriver, tape measure, and pencil. Verify your door's backset and bore hole dimensions match the lock's requirements.
- Ipprepara l-Bieb: If replacing an existing lock, remove it. Ensure the door bore holes and edge bore are clean and correctly sized.
- Installa l-Lukketti: Insert the deadbolt latch and the leverset latch into the door edge. Secure them with screws. Ensure the "UP" marking on the latch is facing upwards.
- Install Deadbolt Exterior Assembly: Place the exterior deadbolt cylinder through the door bore hole, ensuring the tailpiece aligns with the latch mechanism.
- Install Deadbolt Interior Assembly: Attach the interior deadbolt thumb-turn assembly, connecting it to the exterior cylinder's tailpiece. Secure with screws. Test the deadbolt operation with the thumb-turn.
- Install Leverset Exterior Assembly: Insert the exterior lever assembly through the door bore hole, aligning the spindle with the latch mechanism.
- Install Leverset Interior Assembly: Attach the interior lever assembly, ensuring it engages correctly with the exterior assembly and latch. Secure with screws. Test the leverset operation.
- Install Strike Plates: Install the strike plates for both the deadbolt and leverset on the door frame, ensuring proper alignment for smooth operation and security.
For detailed visual instructions, refer to the Kwikset official installation guides or videos available on their websit.
Istruzzjonijiet Operattivi
Using the Keyed Leverset:
- Biex Tissakkar minn Barra: Insert the key and turn it to the locked position. Remove the key.
- Biex tiftaħ minn barra: Insert the key and turn it to the unlocked position. The lever will then operate freely.
- Biex Tissakkar minn Ġewwa: Press the button or turn the thumb-turn (if applicable) on the interior lever.
- Biex tiftaħ mill-Intern: Turn the interior lever handle. This typically retracts the latch and unlocks the door.
Using the Single Cylinder Deadbolt:
- Biex Tissakkar minn Barra: Insert the key into the exterior cylinder and turn it to extend the deadbolt. Remove the key.
- Biex tiftaħ minn barra: Insert the key into the exterior cylinder and turn it to retract the deadbolt. Remove the key.
- Biex Tissakkar minn Ġewwa: Turn the thumb-turn on the interior side to extend the deadbolt.
- Biex tiftaħ mill-Intern: Turn the thumb-turn on the interior side to retract the deadbolt.
Manutenzjoni
- Tindif: Naddaf l-uċuħ esterni tas-serratura b'drapp artab u damp drapp. Evita prodotti tat-tindif jew solventi li joborxu, li jistgħu jagħmlu ħsara lill-finitura.
- Lubrikazzjoni: Periodically apply a graphite-based lubricant (do not use oil-based lubricants) to the keyway and internal mechanisms to ensure smooth operation.
- Issikkar tal-viti: Periodically check and tighten all mounting screws to ensure the lock remains securely fastened to the door. Do not overtighten.
- Kura Ewlenija: Keep keys clean and free of debris. Avoid using bent or damaged keys, as they can damage the lock cylinder.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Key difficult to insert or turn | Dirty keyway, worn key, or lack of lubrication. | Clean keyway, try a new key, or apply graphite lubricant. |
| Latch/Deadbolt does not retract/extend smoothly | Misalignment with strike plate, loose screws, or internal friction. | Check strike plate alignment, tighten mounting screws, lubricate latch mechanism. |
| Lever handle is loose | Loose set screw or mounting screws. | Tighten the set screw on the lever or the main mounting screws. |
| Il-bieb ma jissakkarx sew | Nuqqas ta' allinjament tal-pjanċa tal-istrajk jew tgħawwiġ tal-bieb. | Adjust strike plate position or address door alignment issues. |
Speċifikazzjonijiet
- Ditta: Kwikset
- Mudell: 690DL
- Karatteristika Speċjali: Lock Key
- Tip ta' serratura: Keyed One Side (Deadbolt)
- Materjal: Chrome
- Dimensjonijiet tal-oġġett (L x W x H): 6 x 6 x 6 pulzieri
Garanzija u Appoġġ
Kwikset products are backed by a manufacturer's warranty. For specific warranty details, product support, or to contact customer service, please visit the official Kwikset webis-sit jew irreferi għall-karta tal-garanzija inkluża max-xiri tiegħek. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
Uffiċjali tal-Kwikset Websit: www.kwikset.com
