1. Prodott Aktarview
The TFA Dostmann 30.1048 is a digital probe thermometer designed for accurate temperature measurement of liquids, powdered, and plastic substances. It features a long probe and a clear digital display, making it suitable for various applications, including food preparation and industrial use. This thermometer is splash-proof (IP55 rated) and includes an automatic shut-off function to conserve battery life.
Figure 1: TFA Dostmann 30.1048 Digital Probe Thermometer. This image shows the full view of the thermometer with its long stainless steel probe and digital display.
2. Setup
2.1. Installazzjoni tal-batterija
The thermometer requires one LR44 battery (included). To install or replace the battery:
- Locate the battery compartment cover on the back of the thermometer's head.
- Use a small coin or screwdriver to gently twist and open the cover.
- Insert the LR44 battery with the positive (+) side facing up.
- Replace the battery compartment cover and twist to secure it.
2.2. Użu Inizjali
Before first use, remove any protective film from the display and the probe. Clean the probe according to the maintenance instructions.
3. Istruzzjonijiet Operattivi
3.1. Power On/Off
- To turn the thermometer on, press the ON/OFF buttuna.
- To turn the thermometer off, press the ON/OFF buttuna għal darb'oħra.
- The thermometer features an automatic shut-off function, which will turn off the device after approximately 45 minutes of inactivity to conserve battery life.
3.2. Tieħu Kejl
- Ixgħel it-termometru.
- Carefully insert the stainless steel probe into the substance you wish to measure. Ensure the probe is inserted at least 2 cm (approximately 0.8 inches) into the medium for accurate readings.
- Wait a few seconds for the temperature reading on the digital display to stabilize. The thermometer has a fast response time, typically under 1 second for updates.
- Read the temperature displayed in degrees Celsius ( C).
Figure 2: Proper insertion of the probe for temperature measurement. The image shows a hand holding the thermometer, with the probe inserted into a dark surface, likely an engine compartment, demonstrating its versatility beyond kitchen use.
3.3. Temperature Range and Accuracy
The thermometer measures temperatures within the range of -50 C to +300 C (-58 F to +572 F).
Accuracy specifications:
- 1 C ( 1.8 F) for temperatures between -10 C and +100 C (14 F to 212 F).
- 2 C ( 3.6 F) for temperatures between -50 C and -10 C (-58 F to 14 F) and between +100 C and +200 C (212 F to 392 F).
- 3 C ( 5.4 F) for temperatures above +200 C (392 F).
4. Manutenzjoni
4.1. Tindif
To ensure hygiene and prolong the life of your thermometer:
- Clean the stainless steel probe thoroughly with a damp drapp u deterġent ħafif wara kull użu.
- Do not immerse the main body of the thermometer in water, as it is only splash-proof (IP55 rated), not waterproof.
- Wipe the display and body with a soft, dry cloth.
- Kun żgur li s-sonda tkun niexfa għalkollox qabel ma taħżinha.
4.2. Ħażna
Store the thermometer in a clean, dry place. Use the included plastic protective sheath for the probe to prevent damage and ensure safety.
5 Issolvi l-problemi
5.1. Kwistjonijiet Komuni u Soluzzjonijiet
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-displej huwa vojt jew mudlam. | Batterija baxxa jew mejta. | Ibdel il-batterija LR44. |
| Qari mhux preċiż. | Probe not inserted deep enough; probe tip is dirty; extreme temperature fluctuations. | Ensure probe is inserted at least 2 cm; clean the probe thoroughly; allow thermometer to acclimate to ambient temperature before use. |
| Thermometer does not turn on. | Battery incorrectly installed; battery dead. | Check battery orientation; replace battery. |
6. Speċifikazzjonijiet
- Numru tal-Mudell: 30.1048
- Firxa tat-Temperatura: -50 C to +300 C (-58 F to +572 F)
- Eżattezza: 1 C (-10 to 100 C), 2 C (-50 to -10 C / 100 to 200 C), 3 C (>200 C)
- Tul tas-Sonda: 140 mm (madwar 5.5 pulzieri)
- Sors tal-Enerġija: 1 batterija LR44 (inkluża)
- Dimensjonijiet (L x W x H): 23.5 x 1.7 x 2.49 ċm (madwar 9.25 x 0.67 x 0.98 pulzieri)
- Piż: 22.68-il gramma (madwar 0.8 uqija)
- Materjal: Plastic (body), Stainless Steel (probe)
- Karatteristika Speċjali: Automatic shut-off, Splash-proof (IP55)
- HACCP Compliant: Iva
7. Garanzija u Appoġġ
7.1. Informazzjoni dwar Garanzija
This product typically comes with a 1-year availability of spare parts. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact the manufacturer directly.
7.2. Appoġġ għall-Klijent
For further assistance, technical support, or inquiries regarding your TFA Dostmann 30.1048 thermometer, please contact TFA customer service through their official webis-sit jew l-informazzjoni ta' kuntatt ipprovduta fl-imballaġġ tal-prodott tiegħek.
