Manwal tal-Utent tad-Ditekter tal-Mozzjoni Infra-aħmar Goobay 95175

1. Prodott Aktarview

The Goobay 95175 is a wall-mounted infrared motion detector designed for both indoor and outdoor applications. It features a 180-degree detection area and a range of up to 12 meters, making it suitable for automatically switching lights, lamps, and LEDs. Its IP44 rating ensures protection against splashing water, allowing for reliable operation in outdoor environments.

This sensor accurately detects the movement of people and animals, particularly effective in darkness or low-light conditions. The sensor head is rotatable and tiltable, enabling optimal adjustment of the detection area to suit specific requirements.

Image 1: Goobay 95175 Infrared Motion Detector. This image shows the white, wall-mounted motion detector with its adjustable sensor lens and control knobs for time and light sensitivity.

2. Istruzzjonijiet tas-Sigurtà

• Sigurtà Elettrika: L-installazzjoni u l-manutenzjoni għandhom isiru minn elettriċista kwalifikat skont il-kodiċijiet u r-regolamenti elettriċi lokali.
• Skonnettjar tal-Enerġija: Always disconnect power to the circuit at the main fuse box or circuit breaker before performing any installation, wiring, or maintenance.
• Voltage: Tiżgura l-vol operattivtage of 230V (AC) is correctly supplied.
• Klassifikazzjoni IP44: The device is protected against splashing water (IP44). Do not immerse in water or expose to direct high-pressure water jets.
• Immuntar: Mount the device securely to a stable surface.
• Tfal: Żomm l-apparat fejn ma jintlaħaqx mit-tfal.

3. Karatteristiċi tal-prodott

• Angolu ta' sejbien: 180 grad.
• Firxa ta' sejbien: Sa 12 metri.
• Klassi ta' Protezzjoni: IP44 (splash-proof), suitable for outdoor use.
• Aġġustament tas-Sensor: Rotatable and tiltable sensor head for precise area coverage.
• Sensittività għad-dawl: Adjustable from 3 lux (darkness) to 2000 lux (daylight).
• Tul tat-Tħaddim: Adjustable from 10 seconds to 420 seconds (7 minutes).
• Kapaċità tal-Qlib: Maximum 300W, minimum 1W.
• Vol Operattivtage: 230V (AC).
• Għoli tal-Installazzjoni: Recommended between 1.8 meters and 2.5 meters.

4. Setup u Installazzjoni

This motion detector is designed for surface wall mounting. Ensure the mounting location is stable and provides the desired detection coverage.

4.1 Mounting Location Considerations

• Avoid mounting near heat sources (e.g., vents, direct sunlight) that could cause false triggers.
• Do not point the sensor directly at moving objects like trees or busy roads if not desired.
• The recommended installation height is between 1.8 m and 2.5 m for optimal performance.

4.2 Istruzzjonijiet tal-Wiring

1. Skonnettja l-Enerġija: Itfi l-provvista ewlenija tal-enerġija għaż-żona tal-installazzjoni fis-circuit breaker.
2. Ipprepara Wajers: Strip the insulation from the electrical wires (Live, Neutral, Load) according to standard electrical practices.
3. Qabbad Wajers: Use the screw terminals inside the detector to connect the wires. Typically:
   • Connect the Live (L) wire from the power supply to the Live terminal on the detector.
   • Connect the Neutral (N) wire from the power supply to the Neutral terminal on the detector.
   • Connect the Load (L') wire (to the light fixture) to the Load terminal on the detector.
4. Wiring Sikur: Kun żgur li l-konnessjonijiet kollha huma stretti u sikuri.
5. Mount Detector: Secure the detector to the wall using appropriate screws and anchors.
6. Irrestawra l-Enerġija: Ladarba l-installazzjoni tkun tlestiet u vverifikata, erġa' daħħal l-enerġija fiċ-ċirkwit.

5. Istruzzjonijiet Operattivi

The Goobay 95175 motion detector features adjustable settings for light sensitivity and operating duration.

5.1 Adjusting Light Sensitivity (LUX)

The 'LUX' knob controls the ambient light level at which the detector becomes active. Rotate the knob:

• Towards the 'moon' symbol (lower lux value) for activation only in darker conditions (e.g., night).
• Towards the 'sun' symbol (higher lux value) for activation in brighter conditions (e.g., twilight or even daylight).

5.2 Adjusting Operating Duration (TIME)

The 'TIME' knob sets how long the connected light remains on after motion is detected and no further motion is sensed. Rotate the knob:

• Towards '-' for a shorter duration (minimum 10 seconds).
• Towards '+' for a longer duration (maximum 420 seconds / 7 minutes).

5.3 Adjusting Sensor Angle

The sensor head can be manually rotated and tilted to precisely define the detection area. Adjust the sensor to cover the desired zone and avoid unwanted triggers.

6. Manutenzjoni

The Goobay 95175 motion detector requires minimal maintenance.

• Tindif: Periodically wipe the sensor lens with a soft, dry cloth to remove dust or dirt that might obstruct detection. Do not use abrasive cleaners or solvents.
• Spezzjoni: Regularly check the device for any signs of damage or loose connections.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Goobay customer service directly. Keep your proof of purchase for any warranty claims.

Manifattur: Wentronic GmbH