Manwal tal-Istruzzjonijiet tal-Aputure Amaran AHL-N60 LED Ring Flash

1. Introduzzjoni

The Aputure Amaran AHL-N60 LED Ring Flash is a versatile lighting accessory designed for macro photography and other close-up applications. It provides consistent, uniform illumination, offering both continuous light and flash modes. This manual details the proper setup, operation, maintenance, and troubleshooting for your AHL-N60 unit, ensuring optimal performance and longevity.

2. Informazzjoni dwar is-Sigurtà

• Do not look directly into the LED lights when they are active, as this may cause eye strain or damage.
• Keep the device away from water and other liquids to prevent electric shock or malfunction.
• Do not attempt to disassemble or modify the unit. Repairs should only be performed by authorized service personnel.
• Ensure proper battery installation and use only recommended battery types. Remove batteries during extended periods of non-use.
• Żomm fejn ma jintlaħaqx mit-tfal.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett tiegħek:

• Amaran AHL-N60 LED Ring Flash Unit
• Unità tal-Kontrollur
• Set of Lens Adapter Rings (various sizes)

Figure 3.1: Complete Aputure Amaran AHL-N60 LED Ring Flash kit, including the ring light, controller, and adapter rings.

4. Prodott Aktarview

The AHL-N60 consists of an LED ring light, a control unit, and various lens adapter rings for compatibility with different camera lenses.

4.1 Komponenti

• LED Ring Light: Houses the LED array for illumination. Attaches to the lens via an adapter ring.
• Controller Unit: Connects to the camera's hot shoe and the LED ring light. Contains controls for power, mode selection, and brightness adjustment.
• Ċrieki Adapter: Thread onto your camera lens, allowing the LED ring light to be securely mounted.

Figure 4.1: Various mounting options for the Amaran AHL-N60, showcasinil-flessibbiltà tagħha.

4.2 Controls on the Controller Unit

• Buttuna tal-Qawwa: Ixgħel jew jitfi l-unità.
• Buttuna tal-Modalità: Cycles through different lighting modes (e.g., full, left side, right side, flash).
• Dial tal-Luminożità: Adjusts the intensity of the LED light.
• Flash/Continuous Switch: Toggles between continuous illumination and flash mode.

5. Setup

5.1 Installazzjoni tal-batterija

The controller unit requires batteries for operation. Open the battery compartment on the controller unit and insert the specified number and type of batteries, ensuring correct polarity. Close the compartment securely.

5.2 Immuntar mal-Kamera

1. Select the appropriate adapter ring that matches the filter thread size of your camera lens.
2. Screw the chosen adapter ring onto the front filter thread of your camera lens.
3. Slide the LED ring light onto the adapter ring until it clicks into place or is securely fastened.
4. Attach the controller unit to your camera's hot shoe and tighten the locking mechanism.
5. Connect the cable from the LED ring light to the designated port on the controller unit.

Figure 5.1: The Amaran AHL-N60 LED Ring Flash correctly mounted on a DSLR camera.

6. Modi Operattivi

The Amaran AHL-N60 offers multiple lighting modes to suit various photographic needs.

1. Power On/Off: Press the Power button on the controller unit to turn the device on or off.
2. Continuous Light Mode: Set the Flash/Continuous switch to the 'Continuous' position. The LEDs will remain lit.
3. Modalità Flash: Set the Flash/Continuous switch to the 'Flash' position. The LEDs will only illuminate when the camera's shutter is triggered.
4. Aġġustament tal-luminożità: Rotate the Brightness Dial to increase or decrease the light intensity.
5. Modi tad-Dawl: Press the Mode button to cycle through the available lighting patterns:
   • Luminożità Sħiħa: All LEDs illuminate evenly.
   • Left Side Only: Only the LEDs on the left half of the ring illuminate.
   • Right Side Only: Only the LEDs on the right half of the ring illuminate.

Figure 6.1: Visual comparison of a subject photographed without and with the Amaran AHL-N60 ring flash, highlighting its effect.

7. Manutenzjoni

• Tindif: Uża drapp artab u niexef biex tnaddaf il-barra tal-unità. Għal ħmieġ iebes, neħħi ftitamp Jista' jintuża drapp, segwit minn tnixxif immedjat. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
• Ħażna: Store the AHL-N60 in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries from the controller unit.
• Kura tal-batterija: Replace batteries when performance diminishes. Dispose of used batteries responsibly according to local regulations.

8 Issolvi l-problemi

• L-unità ma tixgħelx:
  • Check if batteries are correctly installed and fully charged.
  • Kun żgur li l-buttuna tal-qawwa hija ppressata sew.
• LEDs are dim or uneven:
  • Adjust the brightness dial.
  • Ibdel il-batteriji jekk ikunu baxxi.
  • Ensure the ring light is securely connected to the controller unit.
• Flash mode not working:
  • Verify the Flash/Continuous switch is set to 'Flash'.
  • Ensure the controller unit is properly seated in the camera's hot shoe and making good contact.
  • Iċċekkja s-settings tal-kamera biex tiżgura li l-flash estern huwa attivat.

If problems persist, contact Aputure customer support for further assistance.

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

Warranty information for the Aputure Amaran AHL-N60 LED Ring Flash is typically provided with the product packaging at the time of purchase. Please refer to the documentation included with your unit for specific warranty terms and conditions.

For technical support, service, or inquiries regarding your product, please contact Aputure customer service. You can usually find contact information on the official Aputure websit jew permezz tal-bejjiegħ tal-prodott tiegħek.