MYTEK DIGITAL Stereo192-DSD DAC M User Manual

1. Introduzzjoni

Grazzi tax-xiriasing the MYTEK DIGITAL Stereo192-DSD DAC M. This high-performance Digital-to-Analog Converter is designed to deliver exceptional audio fidelity for both professional and audiophile applications. This manual provides essential information for setting up, operating, and maintaining your device to ensure optimal performance and longevity.

The Stereo192-DSD DAC M features a wide array of digital inputs and supports high-resolution audio formats including PCM up to 192kHz and DSD64/128. It incorporates a high-quality ESS Sabre 32-bit multi-channel DAC chip used in stereo mode, and a robust headphone amplifier. The Mastering Version specifically includes an SDIF3 (DSD raw) input via BNC connectors for professional DSD recording integration.

2. Prodott Aktarview

Figura 1: Front and Rear Panels of the Stereo192-DSD DAC M.

The top image displays the front panel with the "STEREO192-DSD DAC" branding, a digital display showing "-23" and "192.0", a large volume knob, input selection buttons (DSD, M, INPUT), and a headphone output. The bottom image shows the rear panel with various connectors including SPDIF IN, SPDIF OUT, WORD CLOCK IN/OUT, USB 2.0, USB 1.1, TOSLINK IN, AES/EBU IN, DSD IN (BNC), and balanced XLR (OUT L, OUT R) and unbalanced RCA (OUT L, OUT R) analog outputs. A power inlet is also visible.

3. Setup

3.1 Spakkjar u Tqegħid

• Carefully unpack the Stereo192-DSD DAC M and all accessories.
• Place the unit on a stable, flat surface away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the unit.
• This unit is equipped with a 100V power transformer specifically for the Japanese market. Ensure your power supply matches this requirement.

3.2 Il-Konnessjoni tat-Tagħmir Tiegħek

The Stereo192-DSD DAC M offers a variety of digital inputs and analog outputs for versatile connectivity.

Inputs Diġitali:

• USB 2.0 / USB 1.1: Connect your computer or digital audio source using a standard USB cable. Supports PCM up to 192kHz and DSD64/128 playback.
• FireWire: Connect compatible FireWire audio interfaces or computers. Supports PCM up to 192kHz and DSD64/128 playback.
• SPDIF (Coaxial): Use a coaxial digital cable to connect sources like CD players, network streamers, or other digital audio devices. Supports PCM up to 192kHz.
• AES / EBU: For professional audio equipment, connect via an AES/EBU cable. Supports PCM up to 192kHz.
• TOSLINK (Optical): Connect optical digital sources. Supports PCM up to 192kHz.
• SDIF3 (BNC - Mastering Version Only): For professional DSD transmission, connect DSD recorders (e.g., TASCAM DA3000) via BNC cables.

Outputs Analoġiċi:

• Balanced Line Output (XLR L/R): Connect to balanced inputs of your amplifier or active speakers using XLR cables.
• Unbalanced Line Output (RCA L/R): Connect to unbalanced inputs of your amplifer jew kelliema attivi bl-użu ta' kejbils RCA.
• Headphone Output (Unbalanced): Connect your headphones to the front panel 1/4-inch jack. The integrated headphone amplifier can drive high-impedance models.

Konnessjoni tal-Enerġija:

• Connect the provided power cable to the AC inlet on the rear panel and then to a suitable 100V AC power outlet.

4. Istruzzjonijiet Operattivi

4.1 Tixgħel/Jitfi

• To power on the unit, press the power switch located on the front panel. The display will illuminate.
• Biex titfi, agħfas is-swiċċ tal-enerġija mill-ġdid.

4.2 Għażla tal-Input

• Use the "INPUT" button on the front panel to cycle through the available digital inputs (USB, FireWire, SPDIF, AES/EBU, TOSLINK, SDIF3). The selected input will be indicated on the display.
• For DSD playback, ensure the DSD input is selected if using the SDIF3 connection, or that your USB/FireWire source is configured for DSD output.

4.3 Kontroll tal-Volum

• Rotate the large knob on the front panel to adjust the output volume for both the line outputs and the headphone output.
• The current volume level will be displayed digitally.
• Attenzjoni: Before playing audio, ensure the volume is set to a low level to prevent sudden loud sounds that could damage your hearing or equipment.

4.4 Daqq tal-Awdjo

• Once the desired input is selected and your audio source is playing, the DAC will convert the digital signal to analog audio.
• Il-wiri se juri l-sample rate (e.g., "192.0" for 192kHz PCM) or "DSD" when playing DSD content.
• Aġġusta l-volum għal-livell ta' smigħ preferut tiegħek.

5. Manutenzjoni

• Tindif: Uża drapp artab u niexef biex tnaddaf il-barra tal-unità. Tużax prodotti tat-tindif likwidi jew materjali li joborxu, għax jistgħu jagħmlu ħsara lill-finitura.
• Ventilazzjoni: Ensure that the ventilation slots on the unit are not blocked to prevent overheating.
• Ħażna: Jekk se taħżen l-unità għal perjodu estiż, skonnettjaha mill-elettriku u aħżenha f'post frisk u niexef.
• Servizz: Tippruvax tagħmel manutenzjoni fuq l-unità int stess. Irreferi għal kull manutenzjoni għand persunal tas-servizz kwalifikat.

6 Issolvi l-problemi

• Ebda Qawwa:
  • Iċċekkja jekk il-kejbil tal-enerġija huwiex imqabbad sew mal-unità u mas-sokit tal-enerġija.
  • Kun żgur li s-sokit tal-enerġija huwa attiv.
  • Verify the power switch on the front panel is in the "On" position.
• Ebda Ħsejjes:
  • Confirm the correct input source is selected on the DAC.
  • Check all audio cables (digital input, analog output) are securely connected.
  • Ensure the volume level on the DAC and your amplifier/active speakers is not set to minimum or muted.
  • Verify that your digital audio source is playing and outputting a signal.
  • If using USB/FireWire, ensure the necessary drivers are installed on your computer (refer to Mytek Digital's website for driver downloads).
• Ħoss Mgħawġ:
  • Iċċekkja għal konnessjonijiet tal-kejbil maħlula.
  • Tiżgura l-sample rate of your audio source matches the DAC's capabilities or is being properly downsampled by your source software.
  • Reduce the volume level if the distortion occurs at high volumes.

7. Speċifikazzjonijiet

8. Garanzija u Appoġġ

For detailed information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official MYTEK DIGITAL website. For technical support, driver downloads, or service inquiries, please contact MYTEK DIGITAL customer support directly or consult their official online resources.

Nota: This manual provides general guidance. Specific features and troubleshooting steps may vary. Always refer to the latest information provided by the manufacturer.