Manwal tal-Utent tad-Dawl ta' Quddiem LED PAR Cameo Light CLP64RGB10BS

1. Introduzzjoni

Thank you for choosing the Cameo Light CLP64RGB10BS LED PAR Headlight. This device is designed for professional lighting applications, offering vibrant RGB color mixing and flexible control options. This manual provides essential information for safe and efficient operation, setup, and maintenance of your PAR headlight.

2. Istruzzjonijiet tas-Sigurtà

• Read this manual completely before operating the device.
• Żomm dan il-manwal għal referenza futura.
• Dejjem qabbad l-apparat ma' żbokk tad-dawl ertjat.
• Tesponix l-apparat għax-xita jew l-umdità.
• Kun żgur li jkun hemm ventilazzjoni adegwata madwar l-unità biex tevita li tissaħħan iżżejjed.
• Evita l-espożizzjoni diretta tal-għajnejn għas-sors tad-dawl.
• Skonnettja mill-provvista tal-elettriku qabel ma tnaddaf jew tagħmel manutenzjoni.
• It-tiswijiet għandhom isiru biss minn persunal ikkwalifikat.

3. Kontenut tal-Pakkett

Iċċekkja li l-oġġetti kollha huma preżenti meta tiftaħ il-pakkett:

• Cameo Light CLP64RGB10BS LED PAR Headlight
• Mounting Brackets (2 strokes)
• Manwal ta 'Istruzzjoni (dan id-dokument)
• Kejbil tal-Enerġija

4. Prodott Aktarview

The Cameo Light CLP64RGB10BS features 183 ultra-bright 10mm LEDs (60 red, 60 green, 63 blue) housed in a durable black casing. It includes a control panel for mode selection and DMX connectivity.

Figura 4.1: Quddiem view of the Cameo Light CLP64RGB10BS LED PAR Headlight, showing the LED array and included power cable.

Figura 4.2: Ġenb view of the PAR headlight, illustrating its compact design and ventilation slots.

Figura 4.3: Wara view showing the control panel with LED display, mode buttons, DMX IN, and DMX OUT ports.

Figura 4.4: Dettaljati view of the 10mm LED array, highlighting the individual red, green, and blue diodes.

5. Setup

5.1 Immuntar

The CLP64RGB10BS comes with two mounting brackets for versatile installation. These brackets can be used to stand the unit on a flat surface or to attach it to a truss or lighting stand using appropriate clamps (not included). Ensure the mounting surface or structure can safely support the weight of the fixture.

5.2 Konnessjoni tal-Enerġija

Connect the supplied power cable to the power input on the rear of the unit and then to a standard grounded electrical outlet. The device operates on standard AC power.

5.3 Konnessjoni DMX (Mhux obbligatorja)

For DMX control, connect a DMX controller to the DMX IN port using a 3-pin DMX cable. If linking multiple units, connect the DMX OUT of the first unit to the DMX IN of the next, and so on. Terminate the last unit in the chain with a DMX terminator if experiencing signal issues.

6. Joperaw

6.1 Panel tal-Kontroll

The control panel on the rear of the unit (refer to Figure 4.3) features an LED display and three buttons: MODE, UP, and DOWN. These buttons are used to navigate menus and adjust settings.

• MODALITÀ: Cycles through the main menu options and confirms selections.
• UP: Increases values or moves up through menu options.
• 'L isfel: Decreases values or moves down through menu options.

6.2 Modi Operattivi

The CLP64RGB10BS supports several operating modes:

• Modalità DMX: Allows external control via a DMX controller. The unit can be set to 4 or 6 DMX channels.
• Modalità Kaptan/Skjav: One unit acts as the master, controlling other slave units. Connect DMX OUT of the master to DMX IN of the first slave, and so on.
• Modalità waħedha: The unit operates independently using pre-programmed settings or sound-activated programs.

6.3 Modi tal-Kanal DMX

The device offers two DMX channel configurations:

• Modalità 4-Kanali: Typically controls Red, Green, Blue intensity, and Master Dimmer/Strobe.
• Modalità 6-Kanali: Provides more granular control, often including Red, Green, Blue intensity, Master Dimmer, Strobe, and Color Macros or other effects.

Refer to the DMX occupation diagram printed on the unit (Figure 4.3) for pin assignments: 1: Ground, 2: Signal (-), 3: Signal (+).

6.4 Sound-to-Light Functionality

In Standalone mode, the unit can react to music via its built-in microphone. Use the control panel to select sound-activated programs and adjust sensitivity if available.

7. Manutenzjoni

7.1 Tindif

Regular cleaning helps maintain optimal light output and extends the lifespan of the unit. Disconnect power before cleaning.

• Use a soft, lint-free cloth to wipe the exterior casing.
• For the LED lens, use a soft cloth lightly dampened with a mild glass cleaner. Avoid harsh chemicals.
• Kun żgur li l-fetħiet tal-ventilazzjoni huma ħielsa mit-trab u l-fdalijiet.

7.2 Ħażna

When not in use, store the PAR headlight in a dry, dust-free environment, preferably in its original packaging or a protective case.

8 Issolvi l-problemi

9. Speċifikazzjonijiet

10. Garanzija u Appoġġ

Cameo products are designed for reliability and performance. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Cameo website. For technical support, service, or spare parts, please contact your local dealer or the Cameo customer service department.

Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.