Introduzzjoni
This manual provides essential instructions for the safe and effective use of your Logitech AC Power Adaptor. This adaptor is designed to provide power to various Logitech Harmony and MX series remote controls and accessories. Please read this manual thoroughly before use and retain it for future reference.
Image: Logitech AC Power Adaptor. This image shows the compact design of the power adaptor, featuring its main body and the attached power cord with a 2-pin connector at the end, ready for connection to compatible Logitech devices.
Informazzjoni dwar is-Sigurtà
- Use only with specified Logitech devices.
- Do not expose to water or excessive moisture.
- Do not disassemble or attempt to repair the adaptor.
- Kun żgur li l-volum tas-sokket tal-enerġijatage matches the adaptor's specifications (240 Volts).
- Żomm fejn ma jintlaħaqx mit-tfal.
Setup
- Identifika Apparat Kompatibbli: Confirm your Logitech device (e.g., Harmony 720, 880, 890, 1000, MX 1000, MX Revolution, diNovo Media Laser, MX 5000, MX 3100, diNovo Edge, Harmony 890 Pro) requires this specific AC power adaptor.
- Qabbad mal-Apparat: Insert the 2-pin connector of the AC power adaptor firmly into the power input port of your Logitech device or its charging cradle.
- Qabbad mal-Power Outlet: Plug the AC power adaptor into a standard electrical wall outlet. Ensure the outlet provides 240 Volts as specified for the adaptor.
- Ivverifika l-Konnessjoni: Once connected, your device should begin charging or power on, depending on its design. Refer to your device's specific manual for charging indicators.
Istruzzjonijiet Operattivi
The Logitech AC Power Adaptor functions automatically once connected. It provides a stable power supply for charging or operating your compatible Logitech devices. No user interaction is required for its operation beyond proper connection.
- Always ensure the adaptor is securely plugged into both the device and the wall outlet.
- Disconnect the adaptor from the wall outlet when not in use for extended periods.
- Avoid pulling the cable to disconnect; always grasp the plug itself.
Manutenzjoni
- Tindif: Disconnect the adaptor from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Ħażna: Store the adaptor in a cool, dry place when not in use. Avoid wrapping the cable too tightly around the adaptor body to prevent damage.
- Spezzjoni: Periodically inspect the cable and connector for any signs of damage, such as fraying, cuts, or bent pins. Discontinue use if damage is observed.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-apparat mhux qed jiċċarġja/jinxtegħel. | Adaptor not properly connected. | Ensure the adaptor is firmly plugged into both the device and the wall outlet. |
| Is-sokit tal-ħajt mhux attiv. | Test the wall outlet with another device or try a different outlet. | |
| Adaptor or cable is damaged. | Inspect the adaptor and cable for visible damage. Discontinue use if damaged and replace. | |
| Adaptor feels unusually hot. | Tagħbija żejda jew ħsara interna. | Immediately disconnect the adaptor from the power source and device. Do not use if it continues to overheat. |
Speċifikazzjonijiet
- Ditta: Logitech
- Kompatibilità tal-Mudell: Logitech Harmony 720, 880, 890, 1000 remotes; MX 1000, MX Revolution, diNovo Media Laser, MX 5000, MX 3100, diNovo Edge, Harmony 890 Pro.
- Input Voltage: 240 Volts
- Wattage: 45 Watts
- Sors tal-Enerġija: Corded Elettriku
- Tip ta 'Konnettur tal-Enerġija Prinċipali: 2 Pin
- Piż tal-oġġett: 3.2 ounces (approximately 0.09 Kilograms)
- Dimensjonijiet tal-pakkett: 6.6 x 4 x 2 pulzieri
Garanzija u Appoġġ
For information regarding warranty coverage and technical support, please refer to the documentation included with your original Logitech device or visit the official Logitech support websit. It-termini tal-garanzija jistgħu jvarjaw skont ir-reġjun u l-prodott.
Appoġġ ta' Logitech: https://support.logi.com/