Prodott Overview
The Timken 34000 Series single cone with a stamped steel cage is designed to pair with a single cup (outer ring, sold separately) to form a complete single tapered roller bearing. This assembly is engineered to effectively support both radial and axial loads in various applications. The cone assembly maintains its structural integrity without contracting or expanding within an operating temperature range of -54 to 120 degrees C (-65 to 250 degrees F). Constructed from Timken's high-alloy steel, it offers exceptional durability, heat tolerance, and resistance to deformation under heavy loads. The integrated stamped steel cage ensures proper spacing of the rollers, minimizing friction, vibration, and noise during operation. As a separable tapered roller bearing unit, its open design facilitates easy lubrication and precise adjustments. This single tapered roller bearing is ideal for high-load, moderate-speed applications, including automotive axle systems and conveyor systems in demanding industries such as mining, construction, and agriculture.
Karatteristiċi Ewlenin
- Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing.
- Supports both radial and axial loads between a rotating and non-rotating member.
- Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F).
- Stamped steel cage evenly spaces rollers for reduced friction, vibration, and noise.
- Open configuration for lubrication applied in place.
Setup u Installazzjoni
Kontrolli ta' Qabel l-Installazzjoni
- Inspect the bearing for any signs of damage, such as nicks, burrs, or corrosion.
- Ensure that all mating components, including the shaft and housing bore, are thoroughly clean and free of any debris or burrs.
- Verify that the dimensions of the shaft and housing correspond to the bearing specifications.
Proċedura ta' Installazzjoni
- Clean all surfaces that will come into contact with the bearing.
- Apply a thin, even film of compatible lubricant to the bearing surfaces, especially the rollers and raceways.
- Using appropriate installation tools, press fit the cone (inner ring) onto the shaft. Avoid direct impact on the rollers or cage, which can cause damage.
- Install the cup (outer ring, sold separately) into the housing bore, ensuring it is seated squarely and fully.
- Carefully assemble the cone and cup, ensuring proper alignment.
- Adjust the bearing setting (end play or preload) according to the specific requirements of your application and equipment manufacturer's guidelines.
Linji Gwida ta' Operazzjoni
The Timken 34306 tapered roller bearing is engineered for reliable performance in high-load, moderate-speed applications. Adhering to the following guidelines will ensure optimal operation and longevity:
- This bearing is designed to effectively support both radial and axial loads, making it versatile for various mechanical systems.
- Maintain operating temperatures within the specified range of -54 to 120 degrees C (-65 to 250 degrees F) to prevent material degradation and ensure consistent performance.
- Proper and consistent lubrication is paramount for the bearing's optimal performance, reducing friction and extending its service life.
- Always operate the bearing within its specified load and speed limits to prevent premature wear and potential failure. Consult technical specifications for precise limits.
Manutenzjoni u Lubrikazzjoni
Lubrikazzjoni
The Timken 34306 bearing features an open configuration, which means lubrication must be applied in place during installation and periodically throughout its service life.
- Lubrikant Kompatibbli: Grease is the recommended lubricant for this bearing.
- Regularly inspect the condition of the lubricant. If it appears discolored, contaminated, or degraded, replenish or replace it immediately.
- Always use a high-quality grease that is suitable for tapered roller bearings and the specific operating environment (temperature, moisture, load).
Spezzjoni
- Periodically check the bearing for any visible signs of wear, such as pitting, spalling, or corrosion on the raceways and rollers.
- Listen for any unusual noise or vibration during operation, which can indicate a problem with lubrication, contamination, or damage.
- Ensure that the bearing setting (end play or preload) remains within the specified tolerances to prevent excessive wear or overheating.
Issolvi l-problemi
This section provides guidance on common issues that may arise during the operation of your Timken 34306 Tapered Roller Bearing.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Ħoss Eċċessiv | Lack of lubrication, improper installation, contamination, bearing damage. | Check and replenish lubrication. Re-install bearing correctly, ensuring proper alignment and setting. Clean or replace if contaminated or damaged. |
| Is-sħana żejda | Insufficient lubrication, excessive load, improper bearing setting (too tight), misalignment. | Verify adequate lubrication. Reduce applied load if exceeding limits. Adjust bearing setting to recommended end play or preload. Correct misalignment. |
| Ilbes Prematur | Contamination (dirt, moisture), improper or insufficient lubrication, misalignment, excessive vibration. | Ensure clean operating environment. Use correct type and amount of lubricant. Correct misalignment. Address sources of excessive vibration. |
Speċifikazzjonijiet Tekniċi
Detailed specifications for the Timken 34306 Tapered Roller Bearing.
| Speċifikazzjoni | Valur |
|---|---|
| Brand | TIMKEN |
| Numru tal-Mudell | 34306 |
| Materjal | Azzar Liga |
| Tip ta 'Bearing | Tapered Roller Bearing |
| Dijametru Intern (ID) | 3.0625 pulzieri |
| Wisa' | 0.9060 pulzieri |
| Piż tal-oġġett | 1.3 libbra (0.59 Kilogrammi) |
| Firxa tat-Temperatura Operattiva | -54 sa 120 grad C (-65 sa 250 grad F) |
| Lubrikant Kompatibbli | Griż |
| UPC | 053893268606 |
| Dimensjonijiet tal-Prodott (L x W x H) | 1 x 1 x 1 pulzieri |
| Numru tal-Parti tal-Manifattur | 34306 |
Garanzija u Appoġġ
For detailed warranty information, technical assistance, or any product-related inquiries regarding your Timken 34306 Tapered Roller Bearing, please contact TIMKEN customer service directly or visit their official website. Timken is committed to providing high-quality products and support.
