Introduzzjoni
The Energizer FW2C LED Wearable Light is a compact and lightweight illumination device designed for various activities where hands-free lighting is beneficial. It features multiple light modes and a durable, waterproof design, making it suitable for outdoor and active use.
This manual provides essential information for the safe and effective use of your Energizer FW2C LED Wearable Light, including setup, operation, maintenance, and troubleshooting.
Informazzjoni dwar is-Sigurtà
- Do not look directly into the LED light. It can cause temporary vision impairment.
- Żomm fejn ma jintlaħaqx mit-tfal.
- Armi l-batteriji kif suppost skont ir-regolamenti lokali.
- Tħallatx batteriji qodma u ġodda, jew tipi differenti ta 'batteriji.
- Kun żgur li l-kompartiment tal-batterija jkun magħluq sew biex tinżamm ir-reżistenza għall-ilma.
Kontenut tal-Pakkett
- 1 x Energizer FW2C LED Wearable Light
- 2 x CR2032 Lithium Coin Batteries (for trial purposes)
Konfigurazzjoni: Installazzjoni tal-Batterija
The Energizer FW2C LED Wearable Light requires two CR2032 coin-shaped lithium batteries.
- Locate the battery compartment cover on the back of the light.
- Using a small coin or screwdriver, gently twist the cover counter-clockwise to unlock and remove it.
- Insert two CR2032 batteries, ensuring the positive (+) side faces upwards as indicated inside the compartment.
- Replace the battery compartment cover and twist clockwise until it is securely locked. This ensures the IPX4 water resistance is maintained.
Immaġni: Quddiem view of the Energizer FW2C LED Wearable Light, highlighting its compact size and dimensions (60mm height, 33mm width, 20mm depth). This image also shows icons indicating 30 lumens brightness, 3 hours 15 minutes maximum runtime, 1m impact resistance, and IPX4 water resistance.
Istruzzjonijiet Operattivi
The light features a single button for controlling its functions.
- Biex Tixgħel/Tfi: Press the power button once to turn the light on. Press it again to cycle through modes, and a final press to turn it off.
- Modi tad-Dawl: The Energizer FW2C offers three distinct light modes:
- Dawl abjad: Provides bright, steady illumination.
- Dawl aħmar: Offers a steady red light, useful for preserving night vision or as a low-intensity signal.
- Flash aħmar: A flashing red light for enhanced visibility and signaling, especially in low-light conditions.
Image: Two Energizer FW2C lights side-by-side, illustrating the "High" white light mode and the "Red/Red Flash" mode. This demonstrates the visual difference between the primary white light and the red light options.
The integrated clip allows for versatile attachment to clothing, bags, or other gear, providing hands-free operation.
Image: An Energizer FW2C LED Wearable Light clipped onto a pocket, demonstrating its hands-free attachment capability. This highlights the product's design for convenience and portability.
Image: A person running at night with the Energizer FW2C LED Wearable Light clipped to their jacket zipper, illustrating its use during night running for visibility.
Manutenzjoni
- Tindif: Imsaħ id-dawl b'artab, damp drapp. Tużax tindif jew solventi li joborxu.
- Sostituzzjoni tal-batterija: Replace batteries when the light dims or stops functioning. Follow the "Setup: Battery Installation" steps. Always replace both batteries at the same time.
- Ħażna: If storing the light for an extended period, remove the batteries to prevent leakage.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | Batteriji mejta jew imdaħħla ħażin. | Replace batteries or ensure they are inserted with correct polarity (+/-). |
| Id-dawl huwa dgħajjef. | Qawwa baxxa tal-batterija. | Ibdel il-batteriji. |
| Water resistance seems compromised. | L-għatu tal-kompartiment tal-batterija mhux issiġillat sew. | Ensure the battery compartment cover is fully closed and twisted clockwise until secure. |
Speċifikazzjonijiet
- Mudell: FW2C
- Luminożità massima: 30 lumens
- Continuous Lighting Time: Sa 3 siegħa 15 minuta
- Sors tad-Dawl: LED
- Tip ta 'batterija: 2 x CR2032 coin-shaped lithium batteries
- Dimensjonijiet tal-Prodott (W x D x H): Madwar 28 x 20 x 60 mm (1.1 x 0.8 x 2.4 pulzieri)
- Piż (mingħajr batteriji): 18 g (0.6 oz)
- Reżistenza għall-Ilma: IPX4 (Withstands 10 minutes of water from all directions)
- Komponenti Inklużi: Batteriji tat-Test
Image: A collage showing the Energizer FW2C LED Wearable Light being used in various situations: running, walking a dog, during a power outage, and hiking. This illustrates the versatility and practical applications of the light.
Informazzjoni dwar Garanzija
This Energizer FW2C LED Wearable Light comes with a Garanzija Limitata ta' 1 Snin mid-data tax-xiri. Din il-garanzija tkopri difetti fil-materjali u l-abbilità taħt użu normali.
The warranty does not cover damage resulting from misuse, abuse, accident, unauthorized repair or modification, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Appoġġ
For further assistance, product inquiries, or warranty claims, please contact Energizer customer support through their official websit jew il-bejjiegħ bl-imnut minn fejn inxtara l-prodott.
Please have your product model number (FW2C) and proof of purchase available when contacting support.
