1. Prodott Aktarview
This manual provides essential information for the proper handling, installation, and use of Hypertherm 120926 Plasma Electrodes. These electrodes are genuine Hypertherm consumables designed for optimal performance in compatible plasma cutting systems.
The Hypertherm 120926 electrodes are specifically designed for 40-80A plasma cutting applications, compatible with Hypertherm Powermax 1000/1250/1650/RT80 systems. Each package contains 5 electrodes, ensuring you have a supply of critical components for continuous operation.
Figura 1: Quddiem view of the Hypertherm 120926 Plasma Electrodes packaging, showing the product name, quantity (5), and model number.
Figura 2: Wara view of the Hypertherm 120926 Plasma Electrodes packaging, displaying the five individual electrodes and important safety warnings.
2. Istruzzjonijiet għall-Installazzjoni (Setup)
2.1 Prekawzjonijiet tas-Sigurtà
- Always disconnect power to the plasma cutting system before performing any maintenance or component replacement.
- Wear appropriate personal protective equipment (PPE), including welding gloves and eye protection, when handling plasma torch components.
- Kun żgur li ż-żona tax-xogħol hija ventilata tajjeb.
2.2 Electrode Replacement Procedure
- Itfi: Turn off and unplug the plasma cutting power source.
- Kessaħ: Allow the torch to cool down if it has been recently used.
- Disassemble Torch: Carefully unscrew the retaining cap and remove the nozzle. The electrode will typically be located behind the nozzle.
- Remove Old Electrode: Gently pull out the worn electrode. Inspect the torch body for any damage or debris.
- Install New Electrode: Insert a new Hypertherm 120926 electrode into the torch body, ensuring it seats properly. Do not force it.
- Reassemble Torch: Replace the nozzle and screw the retaining cap back on securely. Ensure all components are tightened to the manufacturer's specifications to prevent gas leaks or poor performance.
- Qawwa Mixgħul: Reconnect power to the plasma cutting system.
Refer to your specific plasma cutting system's user manual for detailed torch disassembly and reassembly instructions.
3. Linji Gwida għall-Użu (Operattivi)
Hypertherm 120926 electrodes are critical components for plasma cutting. Proper usage ensures optimal cut quality and consumable life.
- Settings kurrenti: Uża dak rakkomandat amperage settings for your material thickness and the specific Hypertherm plasma system. Operating outside recommended parameters can prematurely wear electrodes.
- Kwalità tal-Arja: Ensure your compressed air supply is clean, dry, and oil-free. Contaminants in the air can significantly reduce electrode life and cut quality.
- Standoff tat-Torċa: Maintain the correct torch-to-work distance (standoff) as specified by your plasma system's manual. Incorrect standoff can cause excessive wear on the electrode and nozzle.
- Piercing Technique: When piercing, use the recommended piercing height and technique to minimize electrode wear. Avoid "diving" the torch into the material.
- Consumable Inspection: Regularly inspect the electrode and nozzle for signs of wear, such as pitting, excessive erosion, or a deformed orifice. Replace consumables as a set when wear is evident to maintain cut quality.
4. Kura u Ħażna (Manutenzjoni)
Proper care and storage of electrodes can help maintain their integrity and readiness for use.
- Ħażna: Store unused electrodes in their original sealed packaging in a cool, dry place to protect them from moisture and contaminants.
- Immaniġġjar: Handle electrodes with clean hands or gloves to avoid transferring oils or dirt to the contact surfaces.
- Spezzjoni: Before installation, visually inspect each new electrode for any manufacturing defects or damage.
5 Issolvi l-problemi
Electrodes are wear parts, and their performance directly impacts cut quality. Most "troubleshooting" related to electrodes involves recognizing when they need replacement.
| Sintomu | Possible Cause (Electrode Related) | Soluzzjoni |
|---|---|---|
| Poor cut quality (rough, drossy cuts) | Worn or pitted electrode | Replace electrode (and nozzle) |
| Ħajja qasira tal-konsum | Incorrect operating parameters (amperage, standoff), contaminated air, improper piercing technique | Verify settings, check air quality, adjust technique |
| Torch misfiring or unstable arc | Poor electrical contact due to dirty or damaged electrode, incorrect installation | Clean contact surfaces, ensure proper seating, replace if damaged |
If issues persist after replacing consumables, consult your plasma cutting system's comprehensive troubleshooting guide or contact Hypertherm technical support.
6. Speċifikazzjonijiet Tekniċi
| Attribut | Dettall |
|---|---|
| Manifattur | Hypertherm |
| Numru tal-Parti | 120926 |
| Piż tal-oġġett | 1.6 uqija |
| Dimensjonijiet tal-Prodott | 1 x 1 x 6 pulzieri |
| Numru tal-Mudell tal-Oġġett | 120926 |
| Materjal | Ram |
| Kwantità tal-Pakkett tal-Oġġett | 5 |
| Numru Nazzjonali ta' Stokk | 3439-01-616-9044 |
| ASIN | B005V2FYGM |
| L-Ewwel Data Disponibbli | 12 ta’ Ottubru, 2011 |
7. Garanzija u Appoġġ
As a consumable item, the Hypertherm 120926 Plasma Electrodes are designed for a finite lifespan and are subject to wear during normal operation. Specific warranty information for consumables is typically limited to manufacturing defects upon receipt.
For detailed warranty terms, technical assistance, or to report a manufacturing defect, please contact Hypertherm directly through their official website or customer service channels. Ensure you have your product details and purchase information available when contacting support.
Manifattur: Hypertherm
Uffiċjali Websit: www.hypertherm.com
