Introduzzjoni
Thank you for choosing the STEINEL HS 152 XENO Sensor Halogen Floodlight. This product is designed to provide efficient and reliable outdoor lighting with integrated motion detection for enhanced security and convenience. Please read this manual carefully to ensure proper installation, operation, and maintenance of your floodlight.
Image: STEINEL HS 152 XENO Sensor Halogen Floodlight. This image shows the floodlight from a front-side angle, highlighting its compact design and the integrated motion sensor below the lamp akkomodazzjoni.
Istruzzjonijiet tas-Sigurtà
WARNING: Risk of electric shock! Installation requires knowledge of electrical systems. Incorrect installation can lead to fire or electric shock. For your safety, always consult a qualified electrician if you have any doubts.
- Disconnect power at the main fuse or circuit breaker before installation or maintenance.
- Tiżgura l-provvista voltage matches the floodlight's requirements (230-240V).
- Do not open the product housing unless specified in this manual.
- M'għandekx timmodifika l-prodott bl-ebda mod.
- Żomm lit-tfal 'il bogħod mill-materjali tal-ippakkjar.
- The floodlight becomes hot during operation. Avoid touching the lamp or housing immediately after use.
- Aċċerta ruħek li jkun hemm ertjar xieraq skont il-kodiċijiet elettriċi lokali.
- This product is rated IP44 for protection against splashing water. Do not immerse in water.
Kontenut tal-Pakkett
Please check that all parts are present and undamaged:
- 1x STEINEL HS 152 XENO Sensor Halogen Floodlight (with integrated R7s 150W halogen lamp)
- 1x Set of mounting screws and wall plugs
- 1x Set of cover plates for detection range adjustment
- 1x Manwal ta 'Istruzzjoni
Installazzjoni
- Preparazzjoni: Turn off the power supply at the main circuit breaker. Use a voltage tester to ensure the circuit is de-energized.
- Post tal-Immuntar: Choose a suitable mounting location, ideally 1.8m to 2.5m above the ground, where the sensor has an unobstructed view of the desired detection area. Avoid mounting near heat sources or objects that might cause false triggers (e.g., moving branches, busy roads).
- Tħaffir: Mark the drilling points using the floodlight's mounting plate as a template. Drill holes and insert wall plugs.
- Wiring: Connect the electrical wires (Live, Neutral, Earth) from your mains supply to the corresponding terminals inside the floodlight's wiring compartment. Ensure all connections are secure.
- Mounting the Floodlight: Secure the floodlight to the wall using the provided screws. Adjust the floodlight head to the desired angle.
- Qawwa Mixgħul: Restore power at the main circuit breaker. The floodlight will perform a brief self-test.
Operazzjoni
The STEINEL HS 152 XENO floodlight features an integrated passive infrared (PIR) motion sensor. When motion is detected within its adjustable range and the ambient light level falls below the set twilight threshold, the floodlight will automatically switch on for the pre-set duration.
Aġġustament tas-Sensor
The sensor has three main adjustment controls, typically located on the underside of the sensor head:
- Range (Reach): Adjusts the detection distance, up to 12 meters, limitable to approximately 5 meters using the included cover plates. Turn the dial to increase or decrease the range.
- Twilight Threshold (Lux): Sets the ambient light level at which the sensor becomes active. Turn towards the sun symbol for daylight operation (test mode) or towards the moon symbol for activation only in darkness.
- Time Setting (Time): Determines how long the light remains on after motion is detected. Adjust the dial to set the desired duration.
The detection angle is 180° with an opening angle of 90°. Use the provided cover plates to precisely mask out areas you do not wish to be detected, such as public pathways or neighboring properties.
Manutenzjoni
Tindif
Clean the floodlight and sensor lens regularly with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the surfaces or the sensor lens.
Lamp Sostituzzjoni
WARNING: Disconnect power before replacing the lamp.
- Ensure the floodlight is cool before handling.
- Iftaħ b'attenzjoni l-lamp akkomodazzjoni.
- Remove the old R7s halogen lamp.
- Insert a new R7s 150W halogen lamp. Ensure it is correctly seated.
- Agħlaq il-lamp housing securely.
- Irrestawra l-enerġija.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | Ebda provvista ta 'enerġija. Lamp difettuż. Twilight threshold set too high (daylight). Sensor range too low. | Iċċekkja circuit breaker. Ibdel lamp. Adjust twilight setting towards 'moon' symbol. Increase sensor range. |
| Id-dawl jibqa' mixgħul kontinwament. | Continuous motion in detection area. Sensor difettuż. | Adjust sensor range or mask detection area. Ikkuntattja l-appoġġ tal-klijent. |
| Id-dawl jixgħel mingħajr ma jidher li qed jiċċaqlaq. | False triggers (e.g., heat sources, small animals, moving branches). | Adjust sensor angle, reduce range, or use cover plates to mask problematic areas. |
Speċifikazzjonijiet
| Ditta: | STEINEL |
| Numru tal-Mudell: | 632113 |
| Kulur: | Iswed (Note: Product title indicates 'ws' for white, but specifications list 'Noir' for black.) |
| Karatteristika Speċjali: | Ditekter tal-moviment |
| Materjal: | Ħġieġ |
| Sors tal-Enerġija: | Corded Elettriku |
| Tip ta' Sors tad-Dawl: | Aloġenu |
| Numru ta' Sorsi tad-Dawl: | 1 |
| Voltage: | 230 Volts |
| Wattage: | 150 Watts |
| Klassi ta' Protezzjoni: | IP44 |
| Angolu ta' sejbien: | 180° (Opening angle 90°) |
| Max. Firxa ta' sejbien: | 12-il metru (aġġustabbli għal 5 metri) |
Garanzija u Appoġġ
For warranty information and technical support, please refer to the official STEINEL website or contact your local STEINEL distributor. Keep your purchase receipt as proof of purchase.
STEINEL Contact Information:
- Official STEINEL Websit
- Irreferi għall-imballaġġ tal-prodott għal kuntatti ta' appoġġ reġjonali speċifiċi.
