1. Introduzzjoni
This manual provides essential information for the proper installation, use, and maintenance of the RACO Work Cover. Please read these instructions carefully before proceeding with installation to ensure safe and effective operation.
2. Prodott Aktarview
The RACO Work Cover is a durable, square exposed work cover designed for mounting electrical receptacles and switches onto electrical boxes. It is constructed from 16-gauge galvanized steel, ensuring robust performance and longevity in various electrical installations.
Figura 2.1: Quddiem view of the RACO Work Cover.
Figura 2.2: Lura view of the RACO Work Cover, indicating internal volume and branding.
Karatteristiċi ewlenin:
- Kostruzzjoni Durabbli: Manufactured from 16-gauge galvanized steel for enhanced durability and protection.
- Installazzjoni faċli: Features threaded tabs that wedge against the cover for a tight connection without requiring a separate nut.
- NEC Compliance: Meets the requirements of the 2014 NEC Article 250.146(A), allowing for bonding without the use of bonding jumpers for covers with crushed corners.
- Complete Hardware: Includes all necessary hardware for mounting receptacles.
- Elenkat fis-cULus: Ċertifikat għal standards ta' sigurtà u kwalità.
3. Speċifikazzjonijiet
| Attribut | Valur |
|---|---|
| Isem tal-Mudell | HUBBELL ELECTRICAL PROD 812C 4S |
| Numru tal-Parti | 812C |
| Materjal | Azzar Galvanizzat ta' 16-Gauge |
| Dimensjonijiet tal-oġġett (LxWxH) | 4 x 4 x 0.1 pulzieri |
| Dimensjonijiet tal-Pakkett tal-Oġġett (T x W x H) | 4.06 x 4.06 x 0.63 pulzieri |
| Piż tal-Pakkett | 0.15 Kilogrammi |
| Komponenti Inklużi | Square exposed work cover, mounting hardware |
| Manifattur | Hubbell |
| Konformità | cULus Listed, 2014 NEC Article 250.146(A) |
4. Setup u Installazzjoni
The RACO Work Cover is designed for straightforward installation. Ensure all power to the electrical box is turned off at the circuit breaker before beginning any electrical work.
Għodod Meħtieġa (Mhux Inklużi):
- Tornavit (xierqa għall-immuntar tal-viti)
- Voltage tester (to confirm power is off)
Passi ta' Installazzjoni:
- Is-Sigurtà l-Ewwel: Turn off the power to the electrical circuit at the main breaker or fuse box. Verify that the power is off using a voltagtester.
- Ipprepara l-Kaxxa: Ensure the electrical box is securely mounted and all wiring is properly terminated to the receptacle or switch you intend to install.
- Attach Device to Cover: Align the receptacle or switch with the opening on the RACO Work Cover. Use the provided mounting screws to secure the device to the cover. The cover's design with threaded tabs allows for a secure fit without additional nuts.
- Mount Cover to Box: Carefully position the assembled cover and device over the electrical box. Align the mounting holes on the cover with the screw holes on the electrical box.
- Sikura l-Qoxra: Insert the remaining mounting screws through the cover and into the electrical box. Tighten the screws until the cover is firmly secured to the box. Do not overtighten.
- Irrestawra l-Enerġija: Once the cover is securely installed, turn the power back on at the circuit breaker.
Figure 4.1: Detail of the crushed corner design for improved installation.
Note: The RACO Work Cover meets NEC Article 250.146(A) requirements, meaning a bonding jumper is not required for covers featuring crushed corners, simplifying the installation process.
5. It-tħaddim tal-Prodott
The RACO Work Cover functions as a protective and mounting enclosure for electrical devices. Once installed, it provides a secure and compliant housing for your receptacles or switches, allowing them to be safely used. There are no operational controls on the cover itself; its function is passive protection and structural support.
6. Manutenzjoni
The RACO Work Cover requires minimal maintenance due to its durable galvanized steel construction.
- Tindif: Periodically wipe the surface of the cover with a dry or slightly damp cloth to remove dust and dirt. Avoid using abrasive cleaners or solvents that could damage the finish.
- Spezzjoni: Annually inspect the cover for any signs of damage, corrosion, or loose connections. Ensure all mounting screws remain tight. If any damage is observed, replace the cover immediately.
7 Issolvi l-problemi
Most issues related to the RACO Work Cover are installation-related. Refer to the installation section for proper procedures.
- Il-Qoxra Ma Toqgħodx:
- Ensure you have the correct size and type of work cover for your electrical box and device. This model (812C) is a square exposed work cover.
- Check for any obstructions inside or around the electrical box that might prevent the cover from seating properly.
- Screws Do Not Tighten:
- Verify that you are using the correct screws provided with the cover or appropriate replacement screws.
- Check the threads on the electrical box and the cover for damage.
- Cover Appears Loose After Installation:
- Ensure all mounting screws are tightened securely. Do not overtighten, as this can strip threads.
- Confirm the electrical box itself is firmly mounted to the wall or structure.
8. Garanzija u Appoġġ
Informazzjoni dwar il-garanzija:
The RACO Work Cover comes with a 1 Snin Garanzija mid-data tax-xiri. Din il-garanzija tkopri difetti fil-materjali u l-abbilità taħt użu normali. Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.
Appoġġ għall-Klijent:
For technical assistance, warranty claims, or product inquiries, please visit the official RACO brand store or contact their customer service department.
RACO Brand Store: https://www.amazon.com/stores/Raco/page/07990413-0B37-4FD4-968A-448263D18BEA
