Hubbell-Raco 800C 1-Gang Toggle 4-Inch Square Exposed Work Cover Instruction Manual

Prodott Overview

The Hubbell-Raco 800C is a 1-gang toggle 4-inch square exposed work cover designed for mounting switches or receptacles on electrical boxes in surface mount applications. This cover is constructed from heavy-duty 16-gauge galvanized steel, ensuring durability and reliable performance in various environments. Its crushed corners are engineered to ensure ground continuity when mounted on a box.

Immaġni: Quddiem view of the Hubbell-Raco 800C 1-Gang Toggle 4-Inch Square Exposed Work Cover.

Informazzjoni dwar is-Sigurtà

Always ensure power is disconnected at the circuit breaker or fuse box before beginning any electrical installation or maintenance. Consult a qualified electrician if you are unsure about any steps. Follow all local and national electrical codes.

Kontenut tal-Pakkett

1x Hubbell-Raco 800C 1-Gang Toggle 4-Inch Square Exposed Work Cover
Device mounting screws

Note: Electrical devices (switches, receptacles) and electrical boxes are sold separately.

Setup u Installazzjoni

Skonnettja l-Enerġija: Before starting any electrical work, ensure the power is turned off at the main load center or breaker panel to prevent electrical shock.
Prepare the Cover (if applicable): If your cover includes threaded break-off tabs for device mounting, carefully remove them using pliers.
Prepare the Electrical Device: For most receptacles and switches, remove the ears from the mounting strap or yoke by bending them back and forth a few times at the perforation until they break off. If perforations are not visible, use a cutting tool to snip the pieces off. Avoid removing too much material to maintain the integrity of the device mounting holes.
Wire the Device: Connect the electrical device (switch or receptacle) according to the manufacturer's instructions and all applicable electrical codes.
Secure Device to Cover: Attach the wired electrical device to the Hubbell-Raco 800C cover using the device mounting screws provided with the cover or device. The threaded tabs on the cover will wedge against the edge of the device, providing a secure connection without needing a separate nut.
Mount Cover to Box: Remove the two cover mounting screws from the 4-inch square electrical box. Carefully tuck the conductors (wires) into the electrical box. Align the cover with the electrical box and secure it using the cover mounting screws.
Irrestawra l-Enerġija: Once the installation is complete and all connections are secure, restore power at the main load center or breaker panel.

Video: Installation guide for RACO Crushed Corner Exposed Work Covers, demonstrating the process of preparing the device and mounting it to the cover and electrical box.

Hubbell-Raco 800C cover with device mounting screws

Immaġni: Close-up view of the Hubbell-Raco 800C cover, highlighting the device mounting screws and crushed corners for enhanced durability.

Istruzzjonijiet Operattivi

Once installed, the Hubbell-Raco 800C cover functions as a protective enclosure for your electrical device. Operate the switch or use the receptacle as intended for your electrical application. No specific operating instructions are required for the cover itself beyond proper installation.

Manutenzjoni

The Hubbell-Raco 800C cover requires minimal maintenance. Periodically inspect the cover for any signs of damage, corrosion, or loose screws. Ensure the cover remains securely fastened to the electrical box to maintain proper protection and ground continuity. Clean with a dry cloth if necessary; avoid abrasive cleaners.

Issolvi l-problemi

Qoxra maħlula: If the cover feels loose, ensure the mounting screws are tightened securely. Do not overtighten.
Device Not Functioning: If the electrical device (switch/receptacle) is not working, first verify that power is restored at the breaker panel. If the issue persists, re-check wiring connections and ensure the device is properly seated and secured within the cover. If still unresolved, consult a qualified electrician.
Korrużjoni: While made of galvanized steel, prolonged exposure to harsh conditions can lead to corrosion. If significant corrosion is observed, consider replacing the cover to maintain safety and integrity.

Speċifikazzjonijiet

Numru tal-Mudell	800C
Brand	RACO
Materjal	Azzar Galvanizzat ta' 16-Gauge
Kulur	Azzar
Daqs	1-Gang Toggle, for 4-Inch Square Boxes
Forma	Pjazza
Kapaċità	6.5 pulzier kubu
Piż tal-oġġett	5.6 uqija
Dimensjonijiet tal-Prodott	7 x 5.8 x 5.5 pulzieri
UPC	050169999721

Informazzjoni dwar Garanzija

This Hubbell-Raco product comes with a 1-Year Warranty. For specific terms and conditions, please refer to the official RACO warranty documentation or contact customer support.

Appoġġ u Kuntatt

For further assistance, technical support, or warranty claims, please visit the official RACO webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Tista' ssib aktar informazzjoni fuq Ħanut RACO fuq Amazon.

	Katalgu tal-Kaxxi, Għata u Aċċessorji tal-Azzar RACO Katalogu komprensiv li jagħti dettalji dwar il-firxa estensiva ta' kaxxi elettriċi tal-azzar, kisi u aċċessorji ta' RACO. Jinkludi speċifikazzjonijiet tal-prodott, applikazzjonijiet u informazzjoni dwar il-konformità, b'referenza għall-istandards tal-Kodiċi Elettriku Nazzjonali (NEC). Jinkludi dettalji dwar knockouts TKO®, diversi tipi ta' kaxxi u aċċessorji tal-installazzjoni.
	RACO 906C Għatu tax-Xogħol Espost Kwadru ta' 4 Pulzieri għal Reċipjenti Toggle u Duplex - Speċifikazzjonijiet Tekniċi Speċifikazzjonijiet tekniċi u dimensjonijiet dettaljati għall-għatu tax-xogħol espost kwadru ta' 4 pulzieri RACO 906C. Iddisinjat għal swiċċ toggle wieħed u reċipjent elettriku duplex wieħed. Jinkludi materjal, finitura, u tpinġijiet dimensjonali. Numri tal-partijiet: 777030004444, 0777030004444.
	Kaxxa RACO Tonda ta' 4 Pulzieri b'Klassifikazzjoni tas-Saqaf (294-1) - Speċifikazzjonijiet għal Xogħol Ġdid u Antik Speċifikazzjonijiet dettaljati għall-kaxxa elettrika tonda RACO ta' 4 pulzieri b'klassifikazzjoni tas-saqaf, mudell 294-1. Il-karatteristiċi jinkludu fond ta' 2-1/8 pulzieri, tliet knockouts ta' 1/2 pulzier, klassifikazzjoni ta' xogħol ġdid ta' 150 lbs, u lista UL. Adattata għal installazzjonijiet ta' xogħol ġodda u qodma.
	RACO 6260 Round Non-Metallic Floor Box Cover Assembly Kit - Ivory Detailed specifications for the RACO 6260 Round Non-Metallic Floor Box Cover Assembly Kit, featuring an ivory duplex cover and carpet flange. Includes product features, measurements, and packaging details for electrical installations.
	RACO 6239ACBK Kit tal-Kaxxa tal-Art għal Pavimenti tal-Injam Strutturali - Qawwa u Iċċarġjar USB RACO 6239ACBK huwa kit ta' kaxxa għall-art iddisinjat għal pavimenti strutturali tal-injam, li jinkludi reċipjent moħbi b'kapaċitajiet ta' enerġija u ċċarġjar USB. Jinkludi reċipjent tal-ċarġer USB ta' 15A, 125V, 2 Poli, 3 Wajers b'qawwa għolja 3.1. Amp Ħruġ tal-USB (Tip A u Tip-C). Jikkonforma mal-Artikolu 406.11 tal-NEC.
	Kaxxi tal-Art RACO għal Pavimenti tal-Injam Strutturali - Soluzzjonijiet ta' Reċipjenti Moħbija Esplora l-kaxxi tal-art durabbli ta' RACO ddisinjati għal pavimenti strutturali tal-injam, li joffru soluzzjonijiet ta' reċipjenti moħbija b'finitura premium u installazzjoni faċli. Ideali għal applikazzjonijiet kummerċjali, industrijali u residenzjali.

RACO 800C