Rosewill RSV 4 x 3.5-Inch HDD Cage

Introduzzjoni

This user manual provides detailed instructions for the installation, operation, and maintenance of the Rosewill RSV 4 x 3.5-Inch HDD Cage (Model RASA-11001). This product is designed to expand storage capacity within compatible computer cases, specifically as an add-on module for Rosewill RSV-R4000 and RSV-L4000 chassis. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

Informazzjoni dwar is-Sigurtà

• Always disconnect power from your computer system before installing or removing any components.
• Immaniġġja l-komponenti kollha b'attenzjoni biex tevita l-ħsara.
• Ensure proper grounding to avoid electrostatic discharge (ESD) which can damage sensitive electronic components.
• Do not expose the HDD cage to moisture or extreme temperatures.
• This product is intended for use with 3.5-inch HDDs. Ensure compatibility with your hard drives.
• Verify correct power connector orientation to prevent damage to the unit or connected drives. Incorrect connection can lead to component failure or fire.

Kontenut tal-Pakkett

Jekk jogħġbok ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• Rosewill RSV 4 x 3.5-Inch HDD Cage (RASA-11001)
• Manwal għall-Utent
• Mounting Screws (quantity may vary)

Image showing the Rosewill RSV 4 x 3.5-Inch HDD Cage, its user manual, and the product packaging.

Prodott Overview

The Rosewill RASA-11001 HDD Cage is designed to house up to four 3.5-inch hard disk drives. It features a 120mm cooling fan to maintain optimal operating temperatures for the installed drives.

Quddiem view of the Rosewill HDD Cage, highlighting the integrated 120mm fan for cooling.

Dettaljati view of the 120mm cooling fan with its protective grille.

Ġenb view illustrating the four individual drive bays designed for 3.5-inch hard drives.

Setup u Installazzjoni

1. Ipprepara s-Sistema Tiegħek: Power off your computer and disconnect the power cord from the wall outlet. Open your computer case to access the internal drive bays.
2. Identify Compatible Bays: This HDD cage is designed to fit into three standard 5.25-inch drive bays. Ensure your case has three consecutive, unoccupied 5.25-inch bays.
3. Install the HDD Cage: Carefully slide the Rosewill HDD cage into the selected 5.25-inch bays from the front of your computer case. Align the screw holes on the cage with those on your case.
4. Secure the Cage: Use the provided mounting screws to secure the HDD cage to your computer case. Typically, two to four screws on each side are sufficient.
5. Installa Hard Drives:
   • Gently slide each 3.5-inch HDD into an available drive tray within the cage. Ensure the SATA data and power connectors on the HDD align with the backplane connectors of the cage.
   • Push firmly until the drive is fully seated and secured.
6. Connect Power and Data Cables:
   • Connect the appropriate SATA data cables from the HDD cage's backplane to your motherboard's SATA ports.
   • Connect the power cables (typically Molex or SATA power connectors) from your power supply to the corresponding power inputs on the HDD cage. Ensure correct polarity and secure connections.
   • Connect the 120mm fan's power connector to an available fan header on your motherboard or power supply.
7. Ġestjoni tal-Kejbil: Organize cables neatly to ensure proper airflow within the case.
8. Agħlaq il-Kaxxa u Ixgħelha: Close your computer case, reconnect the power cord, and power on your system. Your operating system should detect the newly installed hard drives.

Operazzjoni

Once installed, the Rosewill HDD Cage operates passively, providing a secure housing and cooling for your hard drives. The integrated 120mm fan will activate with system power to ensure consistent airflow over the drives.

• Drive Access: Access to the installed hard drives is managed through your computer's operating system, similar to any other internal storage device.
• Hot-Swap Capability: While the cage supports hot-swap functionality for SATA drives, always ensure your motherboard and operating system are configured for hot-swapping and that drives are safely ejected or unmounted before removal to prevent data loss.
• Indikaturi LED: The cage may feature LED indicators for power and drive activity. Refer to your system's documentation or the cage's specific design for LED behavior.

Manutenzjoni

• Tneħħija tat-Trab: Periodically inspect the 120mm fan and the cage for dust accumulation. Use compressed air or a soft brush to gently remove dust from the fan blades and grilles to maintain optimal airflow.
• Spezzjoni tal-Cable: Occasionally check all connected power and data cables to ensure they are securely seated and not damaged.
• Kundizzjonijiet Ambjentali: Ensure the computer case is kept in a well-ventilated area, away from direct sunlight, heat sources, and excessive humidity.

Issolvi l-problemi

Speċifikazzjonijiet

Informazzjoni dwar Garanzija

Rosewill products typically come with a limited warranty. For specific warranty terms and conditions applicable to your RASA-11001 HDD Cage, please refer to the warranty card included with your product or visit the official Rosewill websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.

Appoġġ għall-Klijent

For technical assistance, troubleshooting, or warranty inquiries, please contact Rosewill customer support:

• Websit: Visit the official Rosewill websit għal riżorsi ta' appoġġ, FAQs, u informazzjoni ta' kuntatt.
• Ħanut online: Rosewill Amazon Store