1. Introduzzjoni
Il- ViewSonic PJD5133 is a high-performance SVGA 800x600 DLP projector designed for various environments, including classrooms and corporate offices. It features 2700 ANSI lumens and a 3000:1 contrast ratio, providing clear and bright images. Its slim and lightweight design enhances portability, making it suitable for both tabletop use and ceiling mounting. This manual provides essential information for setting up, operating, and maintaining your projector.
2. Karatteristiċi ewlenin
- Teknoloġija tal-Wiri: SVGA 800x600 DLP projector.
- Luminożità: 2700 ANSI lumens for clear images.
- Proporzjon ta' Kuntrast: 3000:1 dynamic contrast ratio.
- Konnettività: HDMI, dual RGB in, composite, S-video, RGB out, audio in/out, RS232. Supports HD 720p and 1080i/p via HDMI.
- Aġġustament tal-Immaġni: 1.1x manual optical zoom, vertical keystone correction (+/- 40°).
- Kapaċità 3D: 120Hz/3D-ready with DLP® Link Technology (requires compatible glasses and optional 3D processor).
- Awdjo: Integrated 1W speaker.
- Effiċjenza tal-Enerġija: ECO mode for extended lamp life and reduced power consumption.
- Manutenzjoni: Filter-less design for simplified upkeep.
- Portabbiltà: Lightweight (5.7 lbs) and slim design (3.2 inches height).
3. X'hemm fil-Kaxxa
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:
- ViewSonic PJD5133 Projector
- Kejbil tal-enerġija
- Cable VGA
- Remote control with batteries (2 AA batteries included)
- Gwida Quick Start
- ViewSonic Wizard CD (bil-Gwida għall-Utent)
4. Prodott Aktarview
Figura 1: Quddiem view tal- ViewSonic PJD5133 projector, showing the lens and ventilation grilles.
Figura 2: Angolat view tal- ViewSonic PJD5133 projector, highlighting its compact design and input panel area.
5. Setup
5.1 Tqegħid
Position the projector on a stable, flat surface for tabletop use, or securely mount it to the ceiling. Ensure adequate ventilation around the projector to prevent overheating. The projection distance will determine the image size; refer to the specifications for throw ratio details.
5.2 Apparat li jgħaqqad
- Konnessjoni tal-Enerġija: Connect the power cable to the projector's power inlet and then to an electrical outlet.
- Sors tal-vidjo:
- HDMI: For digital video and audio, connect an HDMI cable from your source device (e.g., Blu-ray player, laptop) to the projector's HDMI port.
- VGA: For analog video, connect a VGA cable from your computer to one of the projector's RGB IN ports.
- S-Vidjo/Kompost: For standard definition video sources, use the S-Video or Composite video input ports.
- Sors Awdjo: If using VGA or other analog video inputs, connect an audio cable from your source device to the projector's Audio In port. The projector has an integrated speaker.
- Control (Optional): For remote control via a computer, connect an RS232 cable to the projector's RS232 port.
6. Istruzzjonijiet Operattivi
6.1 Tixgħel/Jitfi
- Qawwa Mixgħul: Press the power button on the projector or the remote control. The power indicator light will turn blue.
- Itfi: Press the power button twice. The projector will enter a cooling cycle before shutting down completely.
6.2 Aġġustament tal-Immaġni
- Fokus: Dawwar iċ-ċirku tal-fokus fuq il-lenti tal-proġettazzjoni sakemm l-immaġni tkun qawwija u ċara.
- Zoom: Adjust the zoom ring on the projector lens to increase or decrease the image size.
- Korrezzjoni Keystone: If the image appears trapezoidal, use the keystone correction function (usually via the remote or on-screen menu) to adjust the image geometry vertically.
6.3 L-Għażla tas-Sors tal-Input
Press the 'Source' button on the remote control or projector control panel to cycle through available input sources (HDMI, VGA, S-Video, Composite). The projector also features auto source detection.
6.4 Modalità ECO
Activate ECO mode via the projector's menu or remote control to reduce lamp brightness slightly, extend lamp life, and lower power consumption and fan noise. This mode is recommended for environments where maximum brightness is not essential.
6.5 Funzjonalità 3D
The PJD5133 is 3D-ready, supporting 120Hz refresh rates via DLP Link Technology. To experience 3D content, you will need DLP Link compatible active shutter glasses (e.g., ViewSonic PGD-250, sold separately) and potentially a 3D video processor (e.g., ViewSonic VP3D1, sold separately) to convert 3D HD formats.
7. Manutenzjoni
7.1 Filter-less Design
The projector features a filter-less design, eliminating the need for regular air filter cleaning or replacement, which simplifies maintenance and reduces total cost of ownership.
7.2 Lamp Ħajja
Il-proġekter lamp has an estimated life of 5000 hours in normal mode and up to 6000 hours in ECO mode. To maximize lamp life, use ECO mode whenever possible and ensure proper ventilation.
7.3 Tindif
- Barra: Use a soft, dry cloth to clean the projector's casing. For stubborn marks, dampen the cloth slightly with water. Avoid harsh chemicals.
- Lenti: Gently wipe the lens with a lens cleaning cloth or a soft, lint-free cloth specifically designed for optical surfaces. Do not use abrasive materials.
8 Issolvi l-problemi
Jekk tiltaqa' ma' problemi bil-proġettur tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:
- L-ebda Immaġni fuq l-Iskrin:
- Ensure the projector is powered on and the power indicator is blue.
- Verify that the video cable (HDMI, VGA) is securely connected to both the projector and the source device.
- Select the correct input source using the 'Source' button on the remote or projector.
- Check the source device's display settings to ensure it is outputting video.
- L-immaġni hija mċajpra:
- Aġġusta ċ-ċirku tal-fokus fuq il-lenti tal-proġekter.
- Kun żgur li l-wiċċ tal-projezzjoni huwa ċatt u li l-proġettazzjoni hija stabbli.
- Image is Trapezoidal:
- Use the keystone correction function to adjust the image geometry.
- Ensure the projector is positioned perpendicular to the screen as much as possible.
- Ebda Ħsejjes:
- If using HDMI, ensure the source device is sending audio via HDMI.
- If using VGA, ensure an audio cable is connected from the source to the projector's Audio In port.
- Iċċekkja s-settings tal-volum tal-proġettazzjoni u kun żgur li mhux siekta.
- Il-Kontroll mill-bogħod Mhux Jaħdem:
- Kun żgur li m'hemm l-ebda ostaklu bejn ir-remote u r-riċevitur IR tal-proġettazzjoni.
- Ibdel il-batteriji fil-kontroll remot.
9. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | PJD5133 |
| Riżoluzzjoni tal-Wiri | SVGA (800 x 600) |
| Luminożità | 2700 lumens ANSI |
| Proporzjon ta' Kuntrast | 3000:1 |
| Teknoloġija tal-Konnettività | HDMI, VGA, S-Video, Composite, RS232 |
| Karatteristiċi Speċjali | 3D-Ready, Integrated Speaker |
| Dimensjonijiet tal-Prodott | 11.2 x 9.2 x 3.2 pulzieri (284 x 234 x 82 mm) |
| Piż tal-oġġett | 5.7 liri |
| Lamp Life (Normal/Eco) | 5000 / 6000-il siegħa |
| Konsum tal-Enerġija | 235W (typical) / <1W (stand-by) |
| Voltage | 100-240VAC (Auto Switching), 50/60Hz |
10. Garanzija u Appoġġ
10.1 Informazzjoni dwar Garanzija
Il- ViewSonic PJD5133 projector is backed by a comprehensive warranty:
- Partijiet u Xogħol: Garanzija limitata ta '3 snin.
- Lamp: Garanzija limitata ta '1 snin.
- Express Exchange Service: Free 1st year Express Exchange® service (requires product registration).
For complete details regarding warranty terms and conditions, please refer to the documentation included with your product or visit the official ViewSonic websit.
10.2 Appoġġ Tekniku
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact ViewSonic customer support. Contact information and support resources can typically be found on the official ViewSonic websit (www.viewsonic.com).
