Stack-On PC-95C Portable Security Case with Combination Lock

1. Introduzzjoni

The Stack-On PC-95C Portable Security Case is designed to provide secure storage for valuables such as wallets, credit cards, cell phones, or other small items during transit. Its slim-line design allows it to fit conveniently into a briefcase, under a car seat, or within luggage. The case meets TSA airline guidelines for firearm transport and features a foam-padded interior to protect contents from scratches. It includes a 1,500-pound test steel cable for securing the case to a fixed object, and a 3-tumbler combination locking system for keyless security.

Image 1.1: The Stack-On PC-95C Portable Security Case, partially open, revealing the combination lock and protective foam interior.

2. Setup

2.1 Setting Your Personal Combination

Your Stack-On PC-95C case comes with a factory-set combination, typically 0-0-0. To set your personal combination:

1. Open the case using the current combination (factory default or previously set).
2. Locate the reset lever or button on the inside of the lock mechanism. This is usually a small lever that needs to be moved from position A to B, or a button that needs to be pressed and held.
3. While the reset mechanism is engaged, dial your desired 3-digit combination. Choose a memorable but secure combination.
4. Return the reset lever/button to its original position.
5. Scramble the dials to test your new combination. Ensure it opens the case correctly before closing and locking it.

Importanti: Do not forget your combination. There is no master key or override for the combination lock.

2.2 Attaching the Steel Security Cable

The included 1,500-pound test steel cable provides an additional layer of security by allowing you to tether the case to a fixed object.

1. Locate the cable slot on the body of the case.
2. Loop the steel cable around a secure, fixed object (e.g., a car seat frame, a desk leg, or luggage handle).
3. Pass one end of the cable through the cable slot on the case.
4. Close the case and engage the combination lock. Locking the case will secure the cable in place, preventing its removal.

Image 2.1: The Stack-On PC-95C Portable Security Case in its closed position, displaying the combination lock.

3. Operazzjoni

3.1 Ftuħ tal-Każ

1. Align the three combination dials to your personal 3-digit code.
2. Turn the knob adjacent to the combination dials clockwise until the lid releases.
3. Lift the lid to open the case.

3.2 L-Għeluq u l-Illokkjar tal-Kaxxa

1. Ensure all contents are properly placed within the foam-padded interior.
2. Baxxi l-għatu sakemm jingħalaq għalkollox.
3. Turn the knob adjacent to the combination dials counter-clockwise until it clicks into the locked position.
4. Ħawwad il-arloġġi tal-kombinazzjoni biex tiżgura s-serratura.

Immaġni 3.1: Naħa A view of the closed Stack-On PC-95C Portable Security Case, highlighting its compact design and combination lock.

4. Manutenzjoni

4.1 Tindif Ġenerali

To maintain the appearance and functionality of your security case:

• Imsaħ il-barra b'artab, damp drapp. Evita prodotti tat-tindif jew solventi li joborxu li jistgħu jagħmlu ħsara lill-finitura.
• For the combination dials, use a dry cloth to remove dust or debris. Do not apply lubricants to the lock mechanism unless specifically recommended by the manufacturer.

4.2 Foam Interior Care

The foam interior protects your valuables. If it becomes dirty or worn:

• The foam can typically be removed for cleaning. Hand wash with mild soap and water, then allow to air dry completely before placing it back in the case.
• If the foam is significantly damaged, replacement foam can be sourced from the manufacturer or a suitable alternative can be cut to fit.

4.3 Lock Mechanism Inspection

Periodically inspect the internal components of the lock mechanism, particularly the tab that engages with the case body. Ensure all screws are snug. If you notice any looseness or difficulty in locking/unlocking, gently tighten any accessible screws. Avoid over-tightening, which can cause jamming.

5 Issolvi l-problemi

5.1 Case Will Not Open with Correct Combination

• Ivverifika l-Kombinazzjoni: Double-check that you are entering the correct 3-digit combination. Ensure each dial is precisely aligned with the indicator mark.
• Knob Movement: Ensure the knob is turned fully clockwise after entering the combination.
• Mekkaniżmu Intern: If the lock feels stiff or jammed, gently jiggle the lid while turning the knob. Avoid forcing the mechanism.

5.2 Difficulty in Setting New Combination

• Reset Lever Position: Ensure the reset lever or button is fully engaged in the 'set' position while dialing the new combination, and then fully returned to its original position.
• Clear Dials: Make sure the dials are clear of any debris that might prevent smooth movement.

5.3 Lost Combination

If you forget your combination, there is no factory reset code or master key for this type of lock. You may need to attempt to cycle through combinations or contact Stack-On customer support for potential solutions, though recovery without the combination is generally not possible for security reasons.

6. Speċifikazzjonijiet

7. Garanzija u Appoġġ

7.1 Informazzjoni dwar Garanzija

The Stack-On PC-95C Portable Security Case is covered by a Garanzija Limitata ta' Sena. This warranty typically covers defects in materials and workmanship under normal use. Please refer to the warranty documentation included with your product packaging for full terms and conditions, or visit the official Stack-On websit għal informazzjoni dettaljata.

7.2 Appoġġ għall-Klijent

For further assistance, technical support, or inquiries regarding your Stack-On PC-95C case, please contact Stack-On customer service. Keep your product model number (PC-95C) and any purchase information readily available when contacting support.

Tipikament tista' ssib informazzjoni ta' kuntatt fuq is-sit uffiċjali tal-manifattur webis-sit jew fl-imballaġġ tal-prodott.