Prodott Overview
The Sharp SPC800 is a classic quartz analog twin bell alarm clock designed for reliable timekeeping and a powerful alarm. Its traditional design features a clear dial and durable metal construction, making it a functional addition to any bedroom.
- Quartz analog twin bell alarm Clock
- Button for backlight
- Luminous glow in the dark hands
- Dial luminuż
Immaġni: Quddiem view of the Sharp SPC800 Quartz Analog Twin Bell Alarm Clock, showcasing its silver finish and classic twin bell design.
Image: A diagram highlighting the main features of the alarm clock, including its easy-to-read dial, loud twin bell alarm, touch-activated backlight, and requirement for one AA battery.
Setup
1. Installazzjoni tal-batterija
The Sharp SPC800 alarm clock requires one (1) AA battery (not included) for operation. Ensure the battery is inserted with the correct polarity (+/-) as indicated in the battery compartment.
- Sib il-kompartiment tal-batterija fuq wara tal-arloġġ.
- Iftaħ l-għatu tal-kompartiment tal-batterija.
- Insert one (1) AA battery, matching the positive (+) and negative (-) terminals with the markings inside the compartment.
- Agħlaq l-għatu tal-kompartiment tal-batterija sew.
2. Issettjar tal-Ħin Inizjali
After installing the battery, set the current time.
- Locate the "TIME SET" knob on the back of the clock.
- Rotate the "TIME SET" knob clockwise or counter-clockwise until the hour and minute hands display the correct current time.
Immaġni: Wara view of the alarm clock, illustrating the location of the time setting knob, alarm setting knob, and the alarm on/off switch.
Istruzzjonijiet Operattivi
1. Issettjar tal-Ħin tal-Allarm
To set the desired alarm time:
- Locate the "ALARM SET" knob on the back of the clock.
- Rotate the "ALARM SET" knob until the small red alarm hand on the clock face points to your desired alarm time.
- For precise setting, it is recommended to advance the main time hands past the desired alarm time to ensure the alarm hand is correctly positioned for AM/PM if applicable (though this is an analog clock, so it's a 12-hour cycle).
2. Attivazzjoni/Diżattivazzjoni tal-Allarm
The alarm is activated and deactivated using the ON/OFF switch located on the back of the clock.
- To activate the alarm, slide the switch to the "ON" position.
- To deactivate the alarm, slide the switch to the "OFF" position.
- The twin bell alarm is designed to be loud and will continue ringing until manually turned off. This model does not feature a snooze function.
3. L-Użu tad-Dawl ta' Wara
Għal viewing the time in low light conditions:
- Press and hold the "LIGHT" button located on the back of the clock.
- The clock face will illuminate. Release the button to turn off the backlight.
- Note: The hour and minute hands, as well as the hour markers, have a luminous glow-in-the-dark feature for passive visibility in the dark.
Manutenzjoni
1. Sostituzzjoni tal-batterija
To ensure optimal performance, it is recommended to replace the AA battery approximately every six months, or when the clock's accuracy diminishes or the backlight becomes dim.
- Segwi l-passi tal-installazzjoni tal-batterija deskritti fit-taqsima "Setup".
- Armi batteriji qodma b'mod responsabbli skont ir-regolamenti lokali.
2. Tindif
To clean the clock, gently wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish.
Issolvi l-problemi
| Problema | Kawża / Soluzzjoni Possibbli |
|---|---|
| Clock not keeping accurate time or stops working. | Battery is low or depleted. Replace with a fresh AA battery. Ensure battery is inserted with correct polarity. |
| L-allarm ma jdoqqx. | Ensure the alarm ON/OFF switch on the back is in the "ON" position. Check battery level and replace if necessary. Verify the alarm hand is correctly set. |
| Id-dawl ta' wara huwa baxx jew mhux qed jaħdem. | Battery is low. Replace with a fresh AA battery. |
| Audible ticking sound. | This is normal for a quartz analog movement and not an indication of a defect. The sound may be more noticeable in quiet environments. |
| Alarm rings slightly before or after the set time. | Due to the analog nature, minor variations in alarm activation time (a few minutes) can occur. This is typical for this type of mechanism. |
Speċifikazzjonijiet
Image: A visual representation of the alarm clock's dimensions, indicating a width of 4.6 inches, a height of 6.5 inches, and a depth of 2.2 inches.
- Ditta: Sharp
- Numru tal-Mudell: SPC800
- Kulur: Fidda
- Tip ta' wiri: Analogu
- Sors tal-Enerġija: Imħaddem bil-batterija (batterija AA waħda meħtieġa, mhux inkluża)
- Dimensjonijiet tal-Prodott: 2.45"W x 6.9"Għ
- Piż tal-oġġett: 0.83 Lira (13.3 uqija)
- Materjal: Metall
- Tip ta' Moviment: Kwarz
- Formola tal-Arloġġ: Twin Qanpiena
- Tip ta 'Immuntar: Mejda
- Manifattur: MZ Berger
- UPC: 049353711119
Garanzija u Appoġġ
This Sharp SPC800 Quartz Analog Twin Bell Alarm Clock comes with a Garanzija Limitata. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or contact Sharp customer support.
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please visit the official Sharp webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. L-informazzjoni ta' kuntatt tipikament tista' tinstab fuq l-imballaġġ tal-prodott jew fuq il-manuskritt tal-manifattur. websit.
