Manwal tal-Utent tal-Arloġġ tal-Allarm LCD Sharp SPC500

Introduzzjoni

This manual provides comprehensive instructions for the operation and maintenance of your Sharp SPC500 LCD Alarm Clock. Please read this manual thoroughly before use to ensure proper functionality and longevity of your device.

Sharp SPC500 LCD Alarm Clock, front view, displaying 12:46 PM with a blue backlight.

Figura 1: Quddiem view of the Sharp SPC500 LCD Alarm Clock, showing the digital time display and the Sharp logo.

Setup

1. Installazzjoni tal-batterija

The Sharp SPC500 LCD Alarm Clock operates on two (2) AAA batteries (not included). Ensure correct polarity when inserting the batteries.

Sib l-għatu tal-kompartiment tal-batterija fuq wara jew fil-qiegħ tal-arloġġ.
Neħħi l-għatu.
Daħħal żewġ batteriji AAA ġodda, billi tqabbel it-terminali (+) u (-) kif indikat ġewwa l-kompartiment.
Ibdel l-għatu tal-kompartiment tal-batterija b'mod sikur.

2. Issettjar tal-Ħin Inizjali

After installing batteries, the display may flash or show a default time. Proceed to set the current time.

Istruzzjonijiet Operattivi

Issettjar tal-Ħin Kurrenti

Locate the "TIME SET" button, usually on the back or side of the clock. Press and hold it until the time display begins to flash.
Use the "HOUR" and "MINUTE" buttons (often labeled with arrows or +/-) to adjust the hours and minutes. Pay attention to the AM/PM indicator.
Press "TIME SET" again to confirm the time and exit the setting mode.

L-issettjar tal-Ħin ta' Allarm

Locate the "ALARM SET" button. Press and hold it until the alarm time display begins to flash.
Use the "HOUR" and "MINUTE" buttons to adjust the desired alarm time. Observe the AM/PM indicator.
Press "ALARM SET" again to confirm the alarm time.
Ensure the alarm is activated by sliding the "ALARM ON/OFF" switch or pressing the "ALARM ON" button. An alarm icon (e.g., a bell) should appear on the display.

Funzjoni Snooze u Backlight

Tnaqqis When the alarm sounds, press the large "SNOOZE/LIGHT" button on top of the clock to temporarily silence the alarm. The alarm will sound again after a few minutes (typically 5-9 minutes).
Dawl ta' wara: The clock features a backlight on demand. Press the "SNOOZE/LIGHT" button to illuminate the display for a few seconds, allowing you to view il-ħin f'kundizzjonijiet ta' dawl baxx.

Karatteristiċi

0.5" LCD display for clear time visibility.
Ascending alarm volume, starting softly and gradually increasing to ensure you wake up.
Backlight on demand for easy viewing fid-dlam.
Compact and portable design, ideal for travel or bedside use.

Issolvi l-problemi

Problema	Kawża / Soluzzjoni Possibbli
Id-displej huwa vojt jew mudlam.	Batteries are low or depleted. Replace with new AAA batteries. Batteries are inserted incorrectly. Check polarity (+/-).
Alarm does not sound or is too quiet.	Alarm is not activated. Ensure the alarm ON/OFF switch is in the ON position or the alarm icon is displayed. Alarm time is set incorrectly (e.g., AM/PM). Verify the alarm time. The alarm volume, while ascending, may be perceived as low by some users. Ensure the clock is placed in an optimal location for hearing.
Backlight does not stay on.	This model features a "backlight on demand" function, meaning it is designed to illuminate only for a short period (e.g., 10 seconds) when the SNOOZE/LIGHT button is pressed, not to stay on continuously. This is normal operation.
Il-ħin mhux korrett.	Time was not set correctly. Follow the "Setting the Current Time" instructions. Batteries are low, affecting timekeeping accuracy. Replace batteries.

Speċifikazzjonijiet

Brand	Sharp
Mudell	SPC500
Tip ta 'Wiri	LCD diġitali
Sors tal-Enerġija	Battery Powered (2 x AAA batteries, not included)
Karatteristiċi Speċjali	Alarm, Backlight on demand, Ascending alarm volume
Dimensjonijiet (L x W x H)	9.53 x 6.22 x 5.08 cm (3.75 x 2.45 x 2 inches approx.)
Piż	68.04 g (2.4 oz approx.)

Manutenzjoni

To ensure the longevity and proper functioning of your Sharp SPC500 LCD Alarm Clock, follow these simple maintenance guidelines:

Tindif: Wipe the clock's exterior with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
Sostituzzjoni tal-batterija: Replace batteries promptly when the display becomes dim or the clock stops functioning correctly. Remove batteries if the clock will not be used for an extended period to prevent leakage.
Ambjent: Avoid exposing the clock to extreme temperatures, direct sunlight, high humidity, or dusty environments.

Garanzija u Appoġġ

The Sharp SPC500 LCD Alarm Clock comes with a Garanzija limitata ta 'sena mid-data tax-xiri. Din il-garanzija tkopri difetti fil-manifattura taħt użu normali.

For warranty claims, technical support, or further assistance, please contact Sharp customer service. Refer to the official Sharp webis-sit jew id-dokumentazzjoni tax-xiri tiegħek għall-aktar informazzjoni ta' kuntatt aġġornata.

Jekk jogħġbok żomm il-prova tax-xiri tiegħek għal skopijiet ta' garanzija.

	Manwal tal-Utent u Istruzzjonijiet tal-Arloġġ tal-Allarm Diġitali LCD SHARP SPC500 Manwal uffiċjali għall-utent u struzzjonijiet għall-Arloġġ tal-Allarm Diġitali LCD SHARP SPC500. Tgħallem kif tissettja l-ħin, tissettja l-allarm, tuża l-karatteristiċi snooze u backlight, u tifhem it-twissijiet dwar il-provvista tal-enerġija u l-batterija. Jinkludi informazzjoni tal-FCC.
	Manwal tal-Utent tal-Arloġġ tal-Allarm Diġitali LCD SHARP SPC483/SPC222 Manwal tal-utent li jipprovdi struzzjonijiet għat-twaqqif u t-tħaddim tal-Arloġġi tal-Allarm Diġitali LCD SHARP SPC483 u SPC222, inklużi l-karatteristiċi, il-qawwa, il-kura, u l-konformità mal-FCC.
	Arloġġ tal-Allarm LED SHARP SPC189/SPC193 b'Port USB: Manwal tal-Istruzzjonijiet u Garanzija Manwal ta' struzzjoni uffiċjali u informazzjoni dwar il-garanzija għall-Arloġġ tal-Allarm LED SHARP SPC189 u SPC193 b'portijiet tal-iċċarġjar USB. Tgħallem kif tissettja l-ħin, l-allarm, tuża snooze, iċċarġjar USB, u prekawzjonijiet ta' sigurtà.
	SPC268 Arloġġ tal-Allarm tax-Xemx bil-Port USB: Manwal tal-Istruzzjonijiet u Garanzija Manwal ta' struzzjoni uffiċjali u informazzjoni dwar il-garanzija għall-Arloġġ tal-Allarm tax-Xemx SHARP SPC268 bil-Port USB. Tgħallem kif tissettja l-arloġġ, l-allarmi, tuża d-dwal tax-xemx ix-xemx u dawk li jibdlu l-kulur, u tifhem il-prekawzjonijiet ta' sigurtà.
	SHARP SPC543 Arloġġ tal-Allarm tal-Projezzjoni b'Port USB - Manwal tal-Istruzzjonijiet Manwal ta' struzzjonijiet uffiċjali u informazzjoni dwar il-garanzija għall-Arloġġ tal-Allarm tal-Projezzjoni SHARP SPC543 bil-Port USB. Tgħallem kif tissettja l-arloġġ, l-allarm, id-data, tuża l-karatteristika tal-projezzjoni, u tifhem l-istruzzjonijiet tas-sigurtà.
	Arloġġ tal-Allarm LED Sharp SPC182 b'Port USB - Manwal tal-Istruzzjonijiet u Garanzija Manwal ta' struzzjoni uffiċjali u informazzjoni dwar il-garanzija għall-Arloġġ tal-Allarm LED Sharp SPC182 bil-Port USB. Tgħallem dwar il-karatteristiċi, is-setup, it-tħaddim, il-prekawzjonijiet ta' sigurtà, u l-appoġġ għall-klijenti.

Sharp SPC500