1. Istruzzjonijiet Importanti dwar is-Sigurtà
Please read all instructions carefully before using the appliance and retain them for future reference. Incorrect use can lead to injury or damage.
- Sigurtà Elettrika: Tiżgura l-voltagIl-volum indikat fuq l-apparat jikkorrispondi għall-volum tal-provvista tal-elettriku tiegħektage before connecting. Do not immerse the motor unit, cord, or plug in water or any other liquid.
- Sigurtà tax-xafra: The grinding blades are sharp. Exercise extreme caution when handling the blades, especially during cleaning. Always unplug the appliance before cleaning or attempting to remove contents.
- Superviżjoni: Dan l-apparat mhuwiex maħsub għall-użu minn persuni (inklużi tfal) b’kapaċitajiet fiżiċi, sensorji jew mentali mnaqqsa, jew nuqqas ta’ esperjenza u għarfien, sakemm ma jkunux ingħataw superviżjoni jew istruzzjoni dwar l-użu tal-apparat minn persuna responsabbli għas-sigurtà tagħhom. It-tfal għandhom ikunu sorveljati biex jiżguraw li ma jilagħbux bl-apparat.
- Użu Ambjent: Use the appliance on a stable, dry, and level surface. Do not use outdoors.
- Protezzjoni ta' sħana żejda: Do not operate the grinder continuously for more than 30 seconds. Allow a short break between grinding cycles to prevent overheating.
- Manutenzjoni: Tippruvax issewwi l-apparat int stess. Ikkuntattja persunal tas-servizz kwalifikat għal kwalunkwe tiswija.
2. Prodott Aktarview
The Taurus Aromatic Electric Coffee Grinder is designed for efficient and fine grinding of coffee beans, spices, and nuts. Its compact design and stainless steel components ensure durability and ease of use.
Figura 2.1: Quddiem view of the Taurus Aromatic Electric Coffee Grinder.
Figure 2.2: Key features including 150W power, stainless steel body, and the operation button.
Komponenti:
- Unità tal-Mutur (Bażi)
- Grinding Chamber with Stainless Steel Blades
- Transparent Lid with Viewtieqa
- Buttuna tal-Operazzjoni
- Power Cord with Storage
3. Setup
- Ippakkja: Carefully remove the coffee grinder and all its components from the packaging. Retain the packaging for future storage or transport.
- Tindif Inizjali: Qabel l-ewwel użu, imsaħ il-barra tal-unità tal-mutur b'adamp cloth. Wash the grinding chamber and lid with warm, soapy water, rinse thoroughly, and dry completely. Ensure no water enters the motor unit.
- Pjazzament: Place the grinder on a stable, dry, and level surface, away from heat sources and water.
4. Istruzzjonijiet Operattivi
4.1 It-tħin tal-fażola tal-kafè
- Ipprepara l-Fażola: Ensure the grinding chamber is clean and dry.
- Fill Chamber: Add up to 50 grams of whole coffee beans into the grinding chamber. Do not overfill.
Figure 4.1: Filling the grinding chamber with coffee beans. Maximum capacity is 50g.
- Għatu Sikur: Place the transparent lid securely onto the grinding chamber. The grinder will not operate unless the lid is properly closed.
Figure 4.2: The transparent lid features a viewing window to monitor grinding progress.
- Ipplaggja: Qabbad il-korda tad-dawl ma' żbokk elettriku adattat.
- Itħan: Press and hold the operation button to start grinding. Release the button to stop.
Figure 4.3: The durable stainless steel blades ensure efficient grinding.
- For a coarse grind, press for a few seconds.
- For a medium grind, press for 10-15 seconds.
- For a fine grind, press for 20-30 seconds.
Monitor the fineness through the transparent lid. Do not operate for more than 30 seconds continuously.
4.2 Grinding Spices and Nuts
The Taurus Aromatic grinder is also suitable for grinding various dry spices and nuts. Follow the same operating steps as for coffee beans, adjusting grinding time for desired consistency.
Figure 4.4: The grinder can be used for nuts, such as almonds or walnuts.
Figure 4.5: Grinding whole peppercorns for fresh seasoning.
Figure 4.6: Ideal for grinding various dry herbs and spices.
5. Manutenzjoni u Tindif
Tindif regolari jiżgura prestazzjoni ottimali u jestendi l-ħajja tal-grinder tiegħek.
- Dejjem Skonnettja l-Plagg: Qabel ma tnaddaf, dejjem kun żgur li l-apparat ikun skonnettjat mis-sokit tal-elettriku.
- Kamra tat-Tħin Nadifa: Use a small brush (not included) to remove any residual coffee grounds, spices, or nut particles from the grinding chamber and around the blades. Be extremely careful around the sharp blades.
- Wash Lid: L-għatu trasparenti jista' jinħasel b'ilma sħun u bis-sapun. Laħlaħ sew u nixxef kompletament qabel ma terġa' twaħħal.
- Imsaħ barra: Imsaħ il-barra tal-unità tal-mutur b'ċarruta ratba u damp drapp. Tużax prodotti tat-tindif li joborxu jew tgħaddasx l-unità tal-mutur fl-ilma.
- Ħażna: Store the grinder in a dry place, away from direct sunlight and out of reach of children. The power cord can be neatly stored in the base of the unit.
6 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-grinder ma jibdax | 1. Mhux pplaggjat. 2. Lid not properly secured. 3. Il-protezzjoni kontra s-sħana żejda hija attivata. | 1. Kun żgur li l-korda ta 'l-enerġija hija pplaggjata sew fi żbokk. 2. Make sure the lid is correctly placed and locked into position. 3. Unplug the grinder and let it cool down for at least 10-15 minutes before attempting to use it again. |
| It-tħin huwa inkonsistenti | 1. Ħin insuffiċjenti għat-tħin. 2. Overfilling the chamber. | 1. Increase grinding time slightly, observing through the lid. 2. Do not exceed the 50g capacity. Grind in smaller batches if necessary. |
| Riħa ta 'ħruq waqt it-tħaddim | 1. Sħana żejda. 2. Motor strain from grinding hard items or overfilling. | 1. Immediately stop operation, unplug, and allow the unit to cool down completely. 2. Reduce the amount of material being ground and ensure it is suitable for the grinder. Avoid grinding excessively hard items. |
Jekk il-problema tippersisti wara li tipprova dawn is-soluzzjonijiet, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti.
7. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Brand | Taurus |
| Numru tal-Mudell | 908503 |
| Qawwa | 150 Watts |
| Voltage | 240 Volts |
| Materjal | Stainless Steel (Blades and Reservoir) |
| Kapaċità | 50 grams (coffee beans) |
| Dimensjonijiet (L x W x H) | 10.8 x 10.8 x 18.8 ċm |
| Piż | 875 gramma |
| Livell ta' Storbju | 44 Deċibel |
| Karatteristika Speċjali | Fine Grinding, Cable Storage, Non-slip Feet |
Figura 7.1: Qiegħ view showing cord storage, non-slip feet, and approximate dimensions.
8. Garanzija u Appoġġ
This product is covered by a manufacturer's warranty against defects in materials and workmanship under normal use. The specific terms and duration of the warranty may vary by region. Please refer to the warranty card included with your purchase or visit the official Taurus websit għal informazzjoni dettaljata.
Appoġġ għall-Klijent:
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Taurus customer service. Contact details can typically be found on the product packaging, the official Taurus webis-sit, jew l-irċevuta tax-xiri tiegħek.
Meta tikkuntattja l-appoġġ, jekk jogħġbok żomm in-numru tal-mudell tal-prodott tiegħek (908503) u l-prova tax-xiri faċilment disponibbli.
