Manwal tal-Utent tad-Dawl LED American DJ H2O DMX Pro

1. Introduzzjoni

The ADJ H2O DMX Pro is an advanced LED lighting fixture designed to create a simulated water flowing effect. This unit features DMX-512 control, a powerful 50W LED source, and offers versatile applications for various environments such as nightclubs, bars, restaurants, and special events. Its low heat output and efficient power consumption allow for extended operation.

2. Informazzjoni dwar is-Sigurtà

Always observe the following safety precautions to ensure safe operation and prevent damage to the unit:

• Ensure the unit is connected to a grounded power source.
• Tesponix l-unità għax-xita jew l-umdità.
• Evita l-espożizzjoni diretta tal-għajnejn għas-sors tad-dawl.
• Disconnect from power before performing any maintenance or cleaning.
• Aċċerta ruħek li jkun hemm ventilazzjoni xierqa madwar l-unità. Timblokkax il-fetħiet tal-ventilazzjoni.
• Only qualified personnel should perform service or repairs.
• Uża biss il-vol speċifikattage range (AC 120-240V 50/60Hz).

3. Karatteristiċi ewlenin

The H2O DMX Pro offers a range of features for dynamic lighting effects:

• Bright 50W LED source for simulated water flowing effects.
• Designed for projection on walls, ceilings, or floors, with or without fog.
• 3 DMX Channels: Dimming, Glass Wheel, and Colors.
• Two operational modes: DMX and Master/Slave.
• Digital DMX Display with 4-button menu for easy navigation.
• Equipped with two glass effect wheels and one independent dichroic color wheel.
• Six dichroic colors: Orange, Green, Blue, Yellow, Purple, and White.
• 0-100% Dimming via DMX.
• Manual focusing lens.
• Interchangeable beam angles: 34 or 52 degrees (includes 2 replaceable lenses).
• IEC In & Out for daisy-chaining power (connect up to 5 units).
• 1/4-inch input for optional UC3 remote control (sold separately).
• Fan cooled for continuous operation without duty cycle.
• High-tech plastic molded ends for protection during transport.

4. Setup

4.1 Disimballaġġ

Carefully unpack the unit and check for any damage during shipping. Ensure all components are present, including the H2O DMX Pro unit, hanging bracket, and two interchangeable lenses.

4.2 Immuntar

The unit includes a hanging bracket for secure mounting. Ensure the mounting surface can support the weight of the fixture. Always use a safety cable when suspending the unit overhead.

Figura 4.1: Angolu ta' quddiem view of the H2O DMX Pro with its integrated hanging bracket.

Figure 4.2: Another angle view of the H2O DMX Pro, showing the lens and ventilation.

4.3 Konnessjoni tal-Enerġija

Connect the unit to a compatible power outlet using the IEC power input. For daisy-chaining multiple units, use the IEC In and Out ports. Up to 5 H2O DMX Pro units can be daisy-chained together.

Figure 4.3: Rear panel of the H2O DMX Pro, illustrating the IEC power input/output, DMX input/output, and 1/4" remote control input.

4.4 Installazzjoni tal-Lenti

The H2O DMX Pro comes with two interchangeable lenses (34-degree and 52-degree) to adjust the beam angle. Select the appropriate lens for your desired projection width and carefully install it onto the front of the unit.

5. Istruzzjonijiet Operattivi

5.1 Panel tal-Kontroll u Display

The unit features a digital DMX display and a 4-button menu system for easy navigation and setting adjustments. Refer to the display for current mode, DMX address, and other parameters.

5.2 Modi Operattivi

The H2O DMX Pro supports two primary operational modes:

• Modalità DMX: Allows full control over dimming, glass wheel rotation, and color selection via a DMX-512 controller. The unit utilizes 3 DMX channels.
• Modalità Kaptan/Skjav: Connect multiple H2O DMX Pro units via DMX cables. Set one unit as the Master, and the others as Slaves. The Slave units will mirror the Master's settings and effects.

5.3 DMX Control

To operate the unit via DMX, connect a DMX controller to the DMX Input. Set the DMX address on the unit using the digital display. The 3 DMX channels control:

1. Kanal 1: Dimming (0-100%)
2. Kanal 2: Glass Wheel (rotation speed and direction)
3. Kanal 3: Colors (selection of 6 dichroic colors)

5.4 Fokus Manwali

Adjust the manual focusing lens on the front of the unit to achieve a sharp and clear projection of the water effect on your desired surface.

5.5 Effect Examples

Figura 5.1: Eżample of the H2O DMX Pro projecting an orange simulated water effect.

Figura 5.2: Eżample of the H2O DMX Pro projecting a purple simulated water effect.

6. Manutenzjoni

Regular maintenance ensures the longevity and optimal performance of your H2O DMX Pro.

6.1 Tindif

Periodically clean the exterior of the unit with a soft, dry cloth. For the lens and glass effect wheels, use a lint-free cloth and a mild glass cleaner. Ensure the unit is powered off and disconnected before cleaning.

6.2 Fan and Ventilation

Ensure the cooling fan and ventilation openings are free from dust and debris. Blocked vents can lead to overheating and reduced performance.

6.3 LED Source

The 50W LED source has a long life rating of 30,000 hours and typically does not require replacement under normal operating conditions.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information and technical support, please refer to the official ADJ webis-sit jew ikkuntattja lin-negozjant awtorizzat tiegħek. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

Għal aktar għajnuna, jekk jogħġbok żur il- ADJ Store on Amazon or the official ADJ websit.