1. Introduzzjoni
The Xpelair Premier CF20T is an efficient and elegant centrifugal extractor fan designed for effective ventilation in domestic and commercial settings. It is ideal for areas requiring longer duct runs, such as bathrooms, shower rooms, toilets, utility rooms, hotel rooms, and office restrooms. This model features an integrated humidistat and an adjustable run-on timer for optimal performance and energy efficiency. Its two-part casing allows for versatile installation, either recessed or surface-mounted.
Figura 1: Quddiem view of the Xpelair Premier CF20T Centrifugal Extractor Fan. This image shows the compact, white, rectangular unit with ventilation slots at the top and bottom, and the Xpelair Premier logo on the front panel. A small brown indicator light is visible on the right side.
2. Informazzjoni dwar is-Sigurtà
Jekk jogħġbok aqra l-istruzzjonijiet kollha tas-sigurtà bir-reqqa qabel l-installazzjoni u t-tħaddim. Jekk ma ssegwix dawn l-istruzzjonijiet, dan jista' jirriżulta f'xokk elettriku, nar, jew korriment serju.
- Installation must be carried out by a qualified electrician in accordance with all local and national wiring regulations.
- Ensure the power supply is disconnected before attempting any installation, maintenance, or cleaning.
- Dan l-apparat mhuwiex maħsub għall-użu minn persuni (inklużi tfal) b’kapaċitajiet fiżiċi, sensorji jew mentali mnaqqsa, jew nuqqas ta’ esperjenza u għarfien, sakemm ma jkunux ingħataw superviżjoni jew istruzzjoni dwar l-użu tal-apparat minn persuna responsabbli għas-sigurtà tagħhom.
- It-tfal għandhom ikunu sorveljati biex jiżguraw li ma jilagħbux bl-apparat.
- Do not operate the fan if any part is damaged. Contact qualified service personnel for repair.
- Ensure adequate ventilation is provided to prevent the back-flow of gases from open-flued appliances.
3. Prodott Aktarview u Karatteristiċi
The Xpelair Premier CF20T is engineered for high-performance condensation control and efficient air extraction.
- High-Performance Centrifugal Unit: Designed for effective condensation control.
- Umidistat aġġustabbli: User-adjustable step-speed humidistat from 50-90% relative humidity.
- Automatic Run-on Timer: Aġġustabbli minn 30 sekondi sa 20 minuti.
- QuickVisit Feature: Prevents fan operation if light is switched on/off within 2 minutes, saving energy.
- Two-Part Casing: Allows for easy recessed or surface mounting.
- Automatic Air Shutter: Prevents backdraft when the fan is off.
- Manutenzjoni faċli: Clip-on front cover and removable fan blade for simple cleaning.
- Included External Grille: Supplied with a brown 100mm external outlet grille for wall or soffit mounting.
4. Installazzjoni u Setup
Installation should only be performed by a qualified professional. Ensure power is disconnected at the mains before beginning.
4.1 Għażliet ta 'Immuntar
- Immuntar imdawwar: The two-part casing allows the fan to be mounted in ceilings or stud work walls in recesses as shallow as 50mm deep. This requires using the provided side knockout, an FDA adapter, and Profile 29 flat ducting.
- Immuntar tal-wiċċ: The fan can also be surface-mounted directly onto a wall or ceiling.
4.2 Konnessjoni tal-Kanali
- The fan is compatible with 100mm circular ducting.
- For recessed installations, Profile 29 flat ducting can be used with the appropriate adapter.
- Connect the ducting securely to the fan's outlet and route it to the external grille.
4.3 Konnessjoni Elettrika
- Ensure the main power supply is OFF.
- Open the wiring terminal cover on the fan unit.
- Connect the live, neutral, and switched live (for timer/humidistat control) wires according to the wiring diagram provided in the full installation manual (not included here).
- Secure all connections and close the terminal cover.
- Once installation is complete, restore power and test the unit.
5. Istruzzjonijiet Operattivi
The Xpelair Premier CF20T operates automatically based on humidity levels and light activation.
5.1 Humidistat Adjustment
- The humidistat is user-adjustable, typically located behind the front cover.
- Use a small screwdriver to adjust the setting between 50% and 90% relative humidity (RH).
- Setting a lower RH percentage will cause the fan to activate at lower humidity levels, running more frequently. A higher RH percentage will cause it to activate only when the air is more humid.
5.2 Aġġustament tat-Tajmer
- The run-on timer controls how long the fan continues to operate after the light is switched off or humidity drops below the set threshold.
- The timer can be adjusted from 30 seconds to 20 minutes.
- Adjust the timer using the dedicated control, usually a small dial or screw, located near the humidistat.
5.3 QuickVisit Feature
- This feature prevents the fan from activating if the light is switched on and then off again within 2 minutes. This is useful for brief visits to the room, avoiding unnecessary fan operation.
5.4 Tħaddim Manwali (jekk applikabbli)
- Some models may include a manual override via a pullcord or external switch. Refer to your specific model's wiring diagram for details.
6. Manutenzjoni
Regular cleaning ensures optimal performance and longevity of your Xpelair Premier CF20T fan. Always disconnect power before cleaning.
6.1 Tindif tal-Fan
- Skonnettja l-Enerġija: Turn off the electricity supply to the fan at the circuit breaker.
- Neħħi l-qoxra ta' quddiem: The clip-on front cover can be easily removed for access to the fan blade.
- Remove Fan Blade: The fan blade is removable for thorough cleaning. Handle with care.
- Komponenti nodfa: Uża drapp ratba dampened with mild detergent to wipe down the front cover, fan blade, and the interior of the fan casing. Tużax prodotti tat-tindif jew solventi li joborxu.
- Nixxef sewwa: Ensure all components are completely dry before reassembling.
- Erġa' arma: Reattach the fan blade and clip the front cover back into place.
- Irrestawra l-Enerġija: Turn the electricity supply back on.
It is recommended to clean the fan every 3-6 months, or more frequently in dusty or high-humidity environments.
7 Issolvi l-problemi
If you experience issues with your Xpelair Premier CF20T, refer to the following common problems and solutions.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-fann ma jixgħelx. | No power supply; Incorrect wiring; Humidistat setting too high; Timer setting too short. | Check circuit breaker; Verify wiring connections (consult electrician); Lower humidistat setting; Increase timer setting. |
| Il-fann jaħdem kontinwament. | Humidistat setting too low; Timer set too long; Faulty humidistat/timer. | Increase humidistat setting; Decrease timer setting; If problem persists, contact a qualified electrician. |
| Reduced airflow or noisy operation. | Blocked grille or ducting; Dirty fan blade; Obstruction in fan. | Clean external grille and fan blade (refer to Maintenance section); Check ducting for obstructions. |
| Fan does not respond to light switch. | Incorrect switched live wiring; QuickVisit feature active. | Verify wiring (consult electrician); Wait more than 2 minutes after switching light on/off. |
For issues not listed here or if solutions do not resolve the problem, please contact Xpelair customer support or a qualified electrician.
8. Speċifikazzjonijiet
| Attribut | Dettall |
|---|---|
| Brand | Xpelair |
| Numru tal-Mudell | 91016AW (CF20T) |
| Kulur | Abjad |
| Dimensjonijiet tal-Prodott (L x W x H) | 26.01 x 24 x 21.01 ċm |
| Piż tal-oġġett | 2.3 Kilogrammi |
| Qawwa | 75 Watts |
| Voltage | 230 Volts (AC) |
| Materjal | Plastik |
| Livell ta' Storbju | 57 dB |
| Karatteristiċi Speċjali | Timer Modes, Humidistat |
| Disinn tal-fann | Fann estrattur |
| Tip ta 'Immuntar | Mount Wall |
9. Garanzija u Appoġġ
For warranty information, technical support, or to purchase spare parts, please contact Xpelair customer service.
- Refer to the packaging or the official Xpelair webis-sit għad-dettalji ta' kuntatt u t-termini tal-garanzija l-aktar aġġornati.
- When contacting support, please have your product model number (CF20T or 91016AW) and purchase date ready.
