1. Introduzzjoni
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Mafell MT55 cc MaxiMAX 160mm Plunge Saw. Please read this manual thoroughly before using the tool and keep it for future reference.
The Mafell MT55 cc is a versatile plunge saw designed for high-precision cutting tasks. It excels in plunge cuts, cross-cuts, bevel cuts, and angular cuts on various materials, including solid wood, cement fiber boards, Trespa, OSB, gypsum fiber boards, plastics, facade panels, and other panel materials.
2. Istruzzjonijiet tas-Sigurtà
Always observe general power tool safety guidelines to prevent electric shock, fire, and serious injury. Keep this manual accessible for quick reference.
- Sigurtà taż-Żona tax-Xogħol: Żomm iż-żona tax-xogħol nadifa u mdawwla sew. Żoni imbarazzati jew mudlama jistiednu inċidenti. Tħaddimx għodod tal-enerġija f'atmosferi splussivi, bħal fil-preżenza ta' likwidi, gassijiet jew trab fjammabbli.
- Sigurtà Elettrika: Il-plakek tal-għodda tal-enerġija għandhom jaqblu mas-sokit. Qatt ma timmodifika l-plakka bl-ebda mod. Evita kuntatt tal-ġisem ma' uċuħ ertjati jew imwaħħlin mal-art. Tesponix l-għodda tal-enerġija għax-xita jew għal kundizzjonijiet imxarrbin.
- Sigurtà Personali: Dejjem ilbes protezzjoni għall-għajnejn. Uża protezzjoni għas-smigħ meta tħaddem għodda storbjuża. Ilbes sew; evita ħwejjeġ jew ġojjellerija laxka. Orbot xagħrek twil sew.
- Użu u Kura tal-Għodda: Tisforzax l-għodda tal-enerġija. Uża l-għodda tal-enerġija korretta għall-applikazzjoni tiegħek. Skonnettja l-plagg mis-sors tal-enerġija qabel ma tagħmel xi aġġustamenti, tibdel l-aċċessorji, jew taħżen l-għodda tal-enerġija.
- Specific Plunge Saw Safety: Ensure the blade is sharp and clean. Always use the appropriate blade for the material being cut. Secure the workpiece firmly. Maintain a firm grip on the tool.
3. Kontenut tal-Pakkett
Upon unpacking, verify that all components listed below are present and undamaged:
- 1 x Mafell MT55 cc Plunge Saw
- 1 x HM Saw Blade 162 x 1.2/1.8 x 20 mm, Z 48, WZ (Part No. 092584)
- 1 x Parallel Guide (Part No. 201436)
- 1 x MT-PA Position Indicator (Part No. 205398)
- 1 x Connection Cable with Plug, 4m (Part No. 087323)
- 1 x Mafell MAX Systainer Case
4. Identifikazzjoni tal-Komponenti u l-Partijiet
Key components include the motor housing, plunge mechanism, depth adjustment scale, angle adjustment lever, saw blade guard, dust extraction port, and main handle.
5. Setup
5.1. Installazzjoni tax-Xafra
- Kun żgur li l-għodda hija skonnettjata mis-sors tal-enerġija.
- Open the saw blade cover. (Refer to Figure 4.3)
- Agħfas il-buttuna tal-illokkjar tal-magħżel biex twaħħal l-arbor.
- Use the provided wrench to loosen the arbor nut.
- Remove the old blade (if applicable) and clean the arbor flanges.
- Place the new blade onto the arbor, ensuring the rotation direction matches the arrow on the saw.
- Issikka l-iskorfina tal-arbor sew bil-wrench waqt li żżomm is-serratura tal-magħżel.
- Close the saw blade cover.
5.2. Konnessjoni mal-Enerġija
Connect the 4m power cable to a suitable 230V/50Hz power outlet. Ensure the power supply matches the tool's requirements.
6. Istruzzjonijiet Operattivi
6.1. Aġġustament tal-Fond tat-Tqattigħ
The cutting depth can be adjusted precisely to the millimeter. The MT55 cc features a unique depth adjustment mechanism that displays the exact cutting depth, whether used with or without a guide rail. (Refer to Figure 4.5)
- Ħoll il-pum tal-aġġustament tal-fond.
- Move the plunge mechanism to set the desired cutting depth using the scale.
- Issikka l-pum tal-aġġustament tal-fond sew biex tassigura l-issettjar.
6.2. Aġġustament tal-Angolu tal-Bevel
The saw allows for bevel cuts from -1° to +48°. The angle adjustment is secured at two points with a single clamping screw for stability.
- Loosen the angle adjustment clampkamin ing.
- Mejjel il-bażi tas-serrieq għall-angolu mixtieq.
- Issikka l-clamping screw to lock the angle.
6.3. Pre-Scoring Function
The pre-scoring function can be activated with a simple turn, allowing the MT55 cc to produce clean, splinter-free edges comparable to a stationary machine, even with a worn splinter guard.
To activate pre-scoring, engage the dedicated pre-scoring lever or knob (location may vary, refer to tool markings) before making the main cut.
6.4. Using with Guide Rail
For optimal precision and straight cuts, use the MT55 cc with a Mafell guide rail. The saw's base is designed to fit securely onto the rail. (Refer to Figure 4.2 and 4.4)
The Aerofix F-AF 1 suction clamping system (sold separately) can be used with the MT55 cc for perfect cuts and easy handling.
7. Manutenzjoni
7.1. Tindif
Regular cleaning is crucial for maintaining the tool's performance and longevity. The closed saw blade housing and protective slider ensure very low dust production, but regular cleaning is still recommended.
- Dejjem aqla l-għodda qabel tnaddaf.
- Use a brush or compressed air to remove dust and debris from ventilation openings and moving parts.
- Imsaħ il-barra bl-adamp drapp. Tużax kimiċi ħarxa jew solventi.
- Clean the guide rail grooves and the saw's base plate to ensure smooth operation.
7.2. Kura tax-Xafra
A sharp blade is essential for safe and efficient cutting. Replace dull or damaged blades promptly.
- Inspect the blade for wear, cracks, or missing teeth before each use.
- Naddaf ir-reżina u l-qatran akkumulati mix-xafra billi tuża prodott adattat għat-tindif tax-xafra.
- Aħżen ix-xfafar kif suppost biex tevita l-ħsara.
8 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Saw ma jibda | No power supply; Faulty switch; Damaged cable | Check power connection; Test outlet; Inspect cable for damage; Contact service if switch is faulty. |
| Excessive vibration or poor cut quality | Dull or damaged blade; Incorrect blade installation; Loose components | Replace blade; Ensure blade is installed correctly and arbor nut is tight; Check for loose screws. |
| Saw bogs down during cutting | Overfeeding; Dull blade; Incorrect speed setting for material | Reduce feed rate; Replace blade; Adjust speed control (if applicable) for harder materials. |
| L-estrazzjoni tat-trab mhix effettiva | Dust port clogged; Dust bag/vacuum full; Improper connection | Clear dust port; Empty dust bag/vacuum; Ensure secure connection to dust extraction system. |
For issues not listed here, or if solutions do not resolve the problem, please contact Mafell authorized service centers.
9. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Mudell | MT55 cc MaxiMAX (917603) |
| Input ta' Enerġija Rated | 1400 W |
| Voltage | 230V/50Hz |
| Veloċità mingħajr tagħbija | 6250 rpm |
| Saw Xafra Dijametru | 160 mm (162 mm included) |
| Max. Cutting Depth (without rail) | 57 mm |
| Medda ta' Angolu Ċanfrin | -1° sa +48° |
| Piż | 4.7 kg |
| Materjal tax-xafra | Carbide (for included blade) |
| Sors tal-Enerġija | Corded Elettriku |
10. Garanzija u Appoġġ
Mafell products are manufactured to high quality standards and undergo strict quality controls. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Mafell websit.
For technical support, spare parts, or service inquiries, please contact your authorized Mafell dealer or service center. Always provide the model number (MT55 cc MaxiMAX) and serial number of your tool when seeking support.
Uffiċjali Websit: www.mafell.com
