Ideal Lux TRONCO PT1 H60 Tapit tal-Art ta' Barra Lamp Manwal ta' Istruzzjoni

Introduzzjoni

This manual provides essential instructions for the safe installation, operation, and maintenance of your Ideal Lux TRONCO PT1 H60 outdoor floor lamp. Please read this manual thoroughly before installation and retain it for future reference.

Deskrizzjoni tal-Prodott: The TRONCO PT1 H60 is an outdoor pole bollard lamp featuring a varnished die-cast aluminum body and a Pyrex glass diffuser with internal aluminum elements. It is designed for use with an E27 LED or halogen bulb (not included).

Informazzjoni dwar is-Sigurtà

• Ensure the power supply is disconnected before installation, maintenance, or bulb replacement.
• L-installazzjoni għandha titwettaq minn elettriċista kwalifikat skont ir-regolamenti lokali tal-wajers.
• Taqbiżx il-wat massimutage specified (max 1 x 60W E27).
• This product is designed for outdoor use. Ensure all connections are waterproofed appropriately.
• Tkoprix il-lamp with insulating material.
• Jekk il-kejbil estern flessibbli jew il-korda ta 'din il-lampa tkun bil-ħsara, għandha tiġi sostitwita esklussivament mill-manifattur jew mill-aġent tas-servizz tiegħu jew minn persuna kwalifikata simili sabiex jiġi evitat periklu.

Kontenut tal-Pakkett

• TRONCO PT1 H60 Lamp Fixture
• Ħardwer tal-Immuntar (viti, ankri)
• Manwal ta 'Istruzzjoni (dan id-dokument)

Note: Light bulb (E27) is not included and must be purchased separately.

Setup u Installazzjoni

1. Preparazzjoni:

   Before beginning installation, ensure the main power supply is switched off at the circuit breaker. Gather all necessary tools (screwdriver, wire strippers, drill, etc.).
2. Post tal-Immuntar:

   Select a suitable outdoor location for the lamp. The base of the lamp should be mounted on a stable, level surface, such as concrete or a sturdy deck. Ensure adequate drainage if installing in soil.

   

   Image: The Ideal Lux TRONCO PT1 H60 floor lamp, showing its black cylindrical body and clear glass diffuser. This image illustrates the overall appearance of the lamp qabel l-installazzjoni.

3. Installazzjoni bażi:

   Poġġi l-lamp base on the desired surface. Mark the drilling points through the holes in the base. Drill pilot holes if necessary, then secure the lamp base using the provided mounting hardware. Ensure the base is firmly attached.

   

   Image: Technical drawing showing the dimensions of the TRONCO PT1 H60 lamp. The height is 605mm and the diameter is 155mm. This diagram is crucial for planning the installation space.

4. Wiring:

   Route the electrical cable to the lamp's wiring compartment. Connect the live, neutral, and earth wires according to local electrical codes. Ensure all connections are secure and properly insulated, especially for outdoor use. Use appropriate waterproof connectors if required.

5. Installazzjoni tal-bozza:

   Unscrew the diffuser to access the lampholder. Carefully screw an E27 LED or halogen bulb (max 60W) into the lampholder. Do not overtighten. Replace the diffuser, ensuring it is securely fastened to maintain weather resistance.
6. Kontroll Finali:

   Double-check all connections and ensure the lamp is securely mounted. Restore power at the circuit breaker and test the lampfunzjonalità 's.

Istruzzjonijiet Operattivi

The Ideal Lux TRONCO PT1 H60 lamp operates by connecting it to a standard electrical supply. Once installed and powered, the lamp will illuminate when the connected switch is activated.

• Power On/Off: Ikkontrolla l-lamp using the external switch connected to its power supply.
• Tip ta' bozza: Use only E27 base bulbs. LED bulbs are recommended for energy efficiency and longer lifespan.
• Wattage: Do not exceed 60W for the E27 bulb.

Manutenzjoni

Regular maintenance ensures the longevity and optimal performance of your TRONCO PT1 H60 lamp.

• Tindif:

  Disconnect power before cleaning. Wipe the aluminum body with a soft, damp cloth. Clean the Pyrex glass diffuser with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or solvents that could damage the finish.
• Sostituzzjoni tal-bozza:

  Ensure power is off. Unscrew the diffuser. Carefully remove the old E27 bulb and replace it with a new one (max 60W E27). Reattach the diffuser securely.

• Spezzjoni:

  Spezzjona perjodikament il-lamp for any signs of damage, loose connections, or wear on the wiring. If any damage is found, disconnect power and consult a qualified electrician for repair.

Issolvi l-problemi

If problems persist after attempting these solutions, please contact a qualified electrician or Ideal Lux customer support.

Speċifikazzjonijiet

• Mudell: TRONCO PT1 H60 (004730)
• Ditta: Lux Ideal
• Tip: Art ta' barra Lamp / Pole Bollard
• Materjal: Varnished Die-cast Aluminum body, Pyrex Glass diffuser
• Kulur: Iswed
• Dimensjonijiet: Ø 155 mm x H 605 mm (Diameter 15.5 cm x Height 60.5 cm)
• Piż: Madwar 998 g
• Lampdetentur: E27
• Max Wattage: 1 x 60W (E27)
• Input Voltage: 100-240 V
• Tip ta' bozza: LED or Halogen (E27, not included)

Garanzija u Appoġġ

For warranty information and customer support, please refer to the official Ideal Lux webis-sit jew ikkuntattja lill-bejjiegħ tiegħek. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.

Manifattur: Ideal-lux

Kuntatt: Refer to Ideal Lux official channels for support.