Manwal tal-Utent tal-Weiser SmartCode 5 Electronic Deadbolt (9GED14900-001)

Introduzzjoni

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Weiser SmartCode 5 Electronic Deadbolt. The SmartCode 5 deadbolt offers keyless entry convenience with a keypad and enhanced security features, including SmartKey re-key technology. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your lock.

Image: The Weiser SmartCode 5 Electronic Deadbolt in Polished Brass finish, featuring a keypad and traditional keyhole.

Karatteristiċi tal-Prodott

• Dħul mingħajr ċavetta: Operate the deadbolt using a personalized code on the electronic keypad.
• Teknoloġija ta' SmartKey Re-keying: Re-key the lock yourself in seconds in three easy steps, allowing you to match your existing keys.
• Traditional Keyed Entry: Includes a standard keyhole for manual operation.
• Interior Turn Button: Lock or unlock the deadbolt from the inside with a simple turn.
• Sigurtà Mtejba: Designed for exterior doors where robust security is essential.
• Kostruzzjoni Durabbli: Features a 1-inch deadbolt throw for added security.

Image: Diagram illustrating the SmartKey Security features, including resistance to kick-ins, bumps, picks, drills, and saws.

Setup u Installazzjoni

Proper installation is crucial for the optimal performance and security of your SmartCode 5 deadbolt. It is recommended to follow the detailed instructions provided in the separate installation guide included with your product. Ensure your door preparation meets the specified dimensions before beginning installation.

Passi Ewlenin tal-Installazzjoni:

1. Ipprepara l-bieb u l-qafas skont il-mudell ipprovdut.
2. Install the latch and strike plate.
3. Installa l-assemblaġġ tat-tastiera ta' barra.
4. Installa l-assemblaġġ intern, filwaqt li tiżgura konnessjoni xierqa tal-kejbil.
5. Insert 4 AA batteries (not included) into the battery pack.
6. Perform the door handing process to calibrate the lock.

SmartKey Re-keying Instructions:

The SmartKey feature allows you to re-key your lock to an existing key. This process takes seconds and requires your functioning key and the SmartKey tool.

1. Insert the currently programmed key fully into the keyhole and turn it 90 degrees clockwise to the horizontal position.
2. Insert the SmartKey tool firmly and fully into the SmartKey hole. Remove the SmartKey tool.
3. Remove the currently programmed key.
4. Insert the new key you wish to use fully into the keyhole and turn it 90 degrees counter-clockwise to the vertical position.
5. Remove the new key. The lock is now re-keyed. Test with the new key to ensure proper operation.

Image: The Weiser SmartCode 5 Electronic Deadbolt installed on a dark wooden door, showcasing its appearance in a home setting.

Istruzzjonijiet Operattivi

Qfil tal-Bieb:

• Minn Barra (Tastiera): Press the 'Lock' button (the padlock icon) on the keypad.
• Minn Barra (Ċavetta): Insert your key and turn it to lock the deadbolt.
• Minn Ġewwa: Turn the thumb turn on the interior assembly to the locked position.

Niftaħ il-Bieb:

• Minn Barra (Tastiera): Enter your 4-8 digit user code. The deadbolt will retract.
• Minn Barra (Ċavetta): Insert your key and turn it to unlock the deadbolt.
• Minn Ġewwa: Turn the thumb turn on the interior assembly to the unlocked position.

Kodiċi tal-Utent tal-Programmazzjoni:

The lock comes with a default programming code and two default user codes. It is highly recommended to change these immediately after installation.

1. Iftaħ l-għatu tal-batterija fuq l-assemblaġġ intern.
2. Press the 'Program' button once.
3. Enter the 4-digit Programming Code (default is 0-0-0-0).
4. Press the 'Lock' button.
5. Daħħal Kodiċi tal-Utent ġdid ta' 4-8 ċifri.
6. Press the 'Lock' button.
7. Test the new user code to ensure it unlocks the door.

Refer to the full programming guide for instructions on deleting codes, enabling/disabling auto-lock, and other advanced features.

Manutenzjoni

Sostituzzjoni tal-batterija:

The SmartCode 5 deadbolt requires 4 AA batteries. When the batteries are low, the lock will emit a series of beeps and/or flash a red light during operation. Replace all four batteries simultaneously with new, high-quality alkaline AA batteries.

1. Neħħi l-għatu tal-batterija mill-assemblaġġ ta 'ġewwa.
2. Neħħi l-batteriji qodma.
3. Insert four new AA alkaline batteries, observing correct polarity (+/-).
4. Ibdel l-għatu tal-batterija.

Tindif:

Biex tnaddaf is-serratura, uża artab, damp cloth. Avoid abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.

Issolvi l-problemi

If you encounter issues with your Weiser SmartCode 5 Electronic Deadbolt, refer to the following common solutions:

• Is-serratura ma tirrispondix: Iċċekkja l-livelli tal-batterija u ibdelha jekk meħtieġ. Kun żgur li l-konnessjoni tal-kejbil bejn l-assemblaġġi esterni u interni hija sigura.
• It-tastiera ma tixgħelx: This usually indicates dead batteries. Replace all four AA batteries.
• Il-bolt mhux qed jestendi/jirtira kompletament: Ensure the door frame strike plate is properly aligned and the door is not warped. Perform the door handing process again.
• User code not working: Verify the code is entered correctly. Try reprogramming the user code. Ensure the programming code has not been changed or forgotten.
• SmartKey re-keying issue: Ensure the original key is fully inserted and turned 90 degrees. The SmartKey tool must be inserted firmly and fully.

For more complex issues or if the problem persists, contact Weiser customer support or consult the full troubleshooting guide available on the Weiser websit.

Speċifikazzjonijiet

Garanzija u Appoġġ

Weiser products are backed by a limited lifetime mechanical and finish warranty, and a 1-year limited electronics warranty. For specific warranty details, claims, or technical support, please visit the official Weiser webis-sit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom. Żomm il-prova tax-xiri tiegħek għal skopijiet ta’ garanzija.

Weiser Customer Support: Refer to your product packaging or the official Weiser websit għal informazzjoni ta' kuntatt attwali.