1. Introduzzjoni
This manual provides essential information for the safe and efficient operation of your Steinbach SPS 75-1 Filter Pump. This self-priming pump is designed for use with pool filter systems, capable of handling pools up to 33,000 liters. It features a robust 230 V/450 W motor and a pump capacity of 8,520 liters per hour (142 l/min).
Jekk jogħġbok aqra dan il-manwal bir-reqqa qabel l-installazzjoni u t-tħaddim biex tiżgura użu xieraq u biex tevita ħsara lill-unità jew korriment.
2. Istruzzjonijiet tas-Sigurtà
Dejjem osserva l-prekawzjonijiet ta’ sigurtà li ġejjin biex tnaqqas ir-riskju ta’ nar, xokk elettriku, jew korriment.
- Sigurtà Elettrika: Ensure the pump is connected to a properly grounded outlet. Do not operate the pump with a damaged power cord or plug. Disconnect power before performing any maintenance or service.
- Temperatura tal-Ilma: The pump is designed for a maximum water temperature of 35°C (95°F). Operating above this temperature can cause damage to the pump.
- Pjazzament: Install the pump on a stable, level surface, away from direct sunlight and excessive moisture. Ensure adequate ventilation around the motor.
- Tfal u Pets: Żomm it-tfal u l-annimali domestiċi 'l bogħod mill-pompa waqt it-tħaddim.
- Manutenzjoni: Only perform maintenance as described in this manual. For complex repairs, consult a qualified technician.
3. Setup
Segwi dawn il-passi għall-installazzjoni xierqa tal-pompa tal-filtru tiegħek.
- Spakkjar: Carefully remove all components from the packaging. Inspect the pump for any signs of damage during transit.
- Pjazzament: Position the pump as close to the pool as possible, ensuring it is below the water level for optimal self-priming. The pump should be on a firm, level surface to prevent vibration.
- Konnessjonijiet tal-manka: Connect the pool hoses to the pump's inlet and outlet ports. The pump supports hose diameters of 32mm and 38mm. Ensure all connections are tight to prevent leaks and maintain prime.
Figura 3.1: Close-up view of the pre-filter inlet with a hose connection, showing the clear cover and filter basket.
Figure 3.2: The pre-filter inlet without a hose attached, illustrating the threaded connection for secure fitting.
Figure 3.3: The pump's outlet connection with a hose securely fastened, ready for water discharge.
Figure 3.4: The pump's outlet port, showing the internal threading for hose attachment.
Figure 3.5: An overall perspective of the Steinbach SPS 75-1 Filter Pump, highlighting its compact design and key components.
- Ipprajmjar il-Pompa: As a self-priming pump, it will draw water once connected. However, for initial startup, it is recommended to fill the pre-filter housing with water to assist in faster priming.
- Konnessjoni Elettrika: Plug the pump into a suitable 230V electrical outlet. Ensure the circuit is protected by a Residual Current Device (RCD) for safety.
4. Istruzzjonijiet Operattivi
Once installed, operating the pump is straightforward.
- Tibda tal-Pompa: Turn on the power supply to the pump. The pump will begin to draw water and circulate it through your filter system.
- Monitoraġġ: Observe the pump during its initial operation to ensure there are no leaks and that water is flowing correctly. The pump operates at approximately 70 dB.
- Twaqqif tal-Pompa: Itfi l-provvista tal-enerġija għall-pompa.
- Run Time: The optimal run time for your pump depends on your pool size and usage. For a 33,000-liter pool, ensure sufficient daily filtration to maintain water clarity.
5. Manutenzjoni
Regular maintenance ensures the longevity and efficiency of your pump.
- Tindif ta' Qabel il-Filtru: The pump is equipped with a pre-filter to catch larger debris. Regularly inspect and clean the pre-filter basket. To do this, turn off the pump, disconnect power, unscrew the clear lid, remove the basket, clean it, and reassemble. Ensure the O-ring is properly seated for a watertight seal.
- Winterization: Before freezing temperatures, drain all water from the pump and hoses. Store the pump in a dry, frost-free location.
- Tindif Ġenerali: Keep the exterior of the pump clean and free from dirt and debris. Do not use harsh chemicals.
6 Issolvi l-problemi
If you encounter issues with your pump, refer to the following common problems and solutions.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-pompa ma tibdax | Ebda provvista ta 'enerġija Tagħbija żejda tal-mutur Impeller iġġammjat | Iċċekkja l-konnessjoni tal-enerġija u s-circuit breaker Allow motor to cool, check for obstructions Inspect and clear impeller |
| Fluss ta 'ilma baxx | Prefiltru misdud Tnixxija tal-arja fil-linja tal-ġbid Livell tal-ilma baxx fil-pool | Clean pre-filter basket Iċċekkja l-konnessjonijiet kollha għall-issikkar Add water to pool |
| Il-pompa hija storbjuża | Arja fis-sistema Vibrazzjoni Berings milbus | Bleed air from system, check for leaks Ensure pump is on a stable surface Ikkuntattja tekniku kwalifikat |
| Il-pompa titlef il-prim | Tnixxija tal-arja fil-linja tal-ġbid Livell baxx ta 'ilma Prefiltru misdud | Check all connections and O-rings Ensure adequate water level Clean pre-filter basket |
Jekk il-problema tippersisti wara li tipprova dawn is-soluzzjonijiet, jekk jogħġbok ikkuntattja l-appoġġ għall-klijenti jew tekniku tas-servizz kwalifikat.
7. Speċifikazzjonijiet
Technical data for the Steinbach SPS 75-1 Filter Pump.
Figure 7.1: Product label detailing the pump's electrical and performance specifications.
Figure 7.2: Dimensional drawing of the pump, indicating height, width, and length.
| Parametru | Valur |
|---|---|
| Numru tal-Mudell | 040920 |
| Voltage | 230 V |
| Qawwa | 450 W |
| Kapaċità tal-Pompa | 8,520 l/h (142 l/min) |
| Max. Pump Height | 9 m |
| Dijametru tal-Konnessjoni | 32/38 mm |
| Temperatura massima tal-ilma | 35°C |
| Daqs Massimu tal-Pixxina | 33,000 litru |
| Livell ta' Storbju | Appross. 70 dB |
| Dimensjonijiet tal-Prodott (L x W x H) | 45 x 20.5 x 25 ċm |
| Piż tal-oġġett | 6 kg |
| Materjal | Plastik |
| Sors tal-Enerġija | Corded Elettriku |
8. Garanzija u Appoġġ
Specific warranty details for this product are not provided in this manual. Please refer to your purchase documentation or the manufacturer's official websit għall-informazzjoni dwar il-garanzija.
For technical support, spare parts, or service inquiries, please contact Steinbach customer service through their official channels. Always provide your product model number (040920) and purchase date when seeking support.
