1. Introduzzjoni
This manual provides detailed instructions for the safe and proper installation and use of your Brateck PLB-42-BLK-53 Ultra-Slim Adjustable Tilt Wall Mount Bracket. This wall mount is designed to securely hold most 23-inch to 37-inch LCD and Plasma televisions, supporting a maximum weight of 165 lbs (75 kg). Its ultra-slim profile positions your television approximately 1.81 inches (4.6 cm) from the wall, offering a sleek and modern appearance. The adjustable tilt feature allows for optimal viewangoli.
2. Informazzjoni Importanti dwar is-Sigurtà
WARNING: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty. If you have any questions, please contact Brateck customer support.
- Kun żgur li l-wiċċ tal-immuntar jista' jsostni b'mod sikur il-piż ikkombinat tal-immuntar u tat-televiżjoni.
- Teċċedix il-kapaċità massima tal-piż ta' 165 lbs (75 kg).
- Use only the hardware provided or specified by Brateck.
- Always use a stud finder to locate wood studs or ensure concrete walls are suitable for drilling.
- Installazzjoni professjonali hija rakkomandata għal sigurtà u prestazzjoni ottimali.
- Żomm it-tfal 'il bogħod waqt l-installazzjoni.
3. Kontenut tal-Pakkett
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, do not proceed with installation and contact Brateck customer support.
- Assemblea tal-Pjanċa tal-Ħajt
- TV Mounting Arms (2)
- Kit tal-Ħardwer (diversi viti, woxers, spacers, ankri)
- Built-in Leveling Bubble (integrated into wall plate)
4. Speċifikazzjonijiet tal-Prodott
| Karatteristika | Speċifikazzjoni |
|---|---|
| Numru tal-Mudell | PLB-42-BLK-53 |
| Materjal | Azzar Liga |
| Kulur | Iswed |
| Daqsijiet tat-TV Kompatibbli | 23" to 37" LCD/Plasma TVs |
| Kapaċità massima tal-piż | 165 lbs (75 kg) |
| Angolu Mejjel | -10° Degree Variable Downward Tilt |
| Wall Distance (Profile) | 1.81 pulzieri (4.6 ċm) |
| VESA Compatibility (Horizontal) | 56mm (min) - 424mm (max) / 2.25" (min) - 16.5" (max) |
| VESA Compatibility (Vertical) | 43mm (min) - 230mm (max) / 1.75" (min) - 9" (max) |
| Dimensjonijiet tal-Pjanċa tal-Ħajt | 18" Wide x 8" High (approx.) |
The image below illustrates the key dimensions and VESA mounting patterns for the Brateck PLB-42-BLK-53 wall mount.
Figure 1: Wall Mount Dimensions and VESA Compatibility
5. Gwida għall-Installazzjoni
Before you begin, ensure you have the necessary tools (e.g., drill, stud finder, screwdriver, level, measuring tape) and understand the instructions completely.
5.1. Kontrolli ta 'qabel l-installazzjoni
- Kompatibbiltà tat-TV: Verify your TV's VESA mounting pattern is within the mount's supported range (max 420x230mm).
- Tip ta' Ħajt: Determine if your wall is wood stud, concrete, or brick. Different hardware and drilling techniques are required.
- Kapaċità tal-piż: Ikkonferma li l-piż tat-TV tiegħek ma jaqbiżx l-165 lbs (75 kg).
5.2. Installazzjoni Pass Pass
The following image shows the main components of the wall mount bracket.
Figure 2: Brateck PLB-42-BLK-53 Wall Mount Bracket
- Immarkar u Tħaffir:
- Iddetermina l-għoli mixtieq għat-TV tiegħek.
- Position the wall plate against the wall and use the integrated leveling bubble to ensure it is perfectly horizontal.
- Immarka l-postijiet tat-tħaffir permezz tat-toqob fuq il-pjanċa tal-ħajt.
- Drill pilot holes according to the type of wall and hardware being used (e.g., for wood studs, drill directly; for concrete, use masonry drill bit and anchors).
- Waħħal il-Pjanċa tal-Ħajt:
- Align the wall plate with the drilled holes.
- Secure the wall plate to the wall using the appropriate screws and washers from the hardware kit. Ensure it is firmly attached.
- Waħħal il-Brakketti tat-TV:
- Poġġi t-TV tiegħek b'attenzjoni wiċċu 'l isfel fuq wiċċ artab u nadif.
- Attach the two TV mounting arms to the back of your television using the correct screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern. Ensure the arms are securely fastened and evenly spaced.
- Immuntar tat-TV mal-Pjattaforma tal-Ħajt:
- With assistance, carefully lift the television with the attached mounting arms.
- Hook the mounting arms onto the top edge of the wall plate.
- Gently lower the TV until the arms are fully seated on the wall plate.
- Waħħal sew it-TV mal-immuntar:
- Locate the safety screws or locking mechanisms on the bottom of the TV mounting arms.
- Tighten these screws to secure the TV to the wall plate, preventing accidental dislodgement.
6. Operating Instructions (Tilt Adjustment)
The Brateck PLB-42-BLK-53 mount features an adjustable tilt mechanism to optimize your viewing esperjenza.
- Unlock Tilt: Loosen the tilt adjustment knobs located on the sides of the TV mounting arms. Do not remove them completely.
- Aġġusta Angolu: Gently tilt the bottom of your television forward or backward to achieve the desired viewing angle (up to -10 degrees downward tilt).
- Lock Tilt: Once the desired angle is set, firmly tighten the tilt adjustment knobs to secure the television in place. Ensure both knobs are equally tightened to prevent uneven stress on the mount.
7. Manutenzjoni
- Tindif: Uża drapp artab u niexef biex tnaddaf il-muntatura. Evita prodotti tat-tindif jew solventi li joborxu li jistgħu jagħmlu ħsara lill-finitura.
- Kontrolli perjodiċi: Periodically inspect the mount and all fasteners to ensure they remain secure. Retighten any loose screws if necessary.
- Limitu tal-Piż: Tiddendelx oġġetti addizzjonali jew taqbeż il-kapaċità massima tal-piż tal-muntatura.
8 Issolvi l-problemi
- It-TV mhux livellat: Ensure the wall plate was installed perfectly level using the built-in bubble level. If the wall plate is level, check if the TV mounting arms are attached evenly to the TV. Minor adjustments can sometimes be made by slightly loosening and re-tightening the TV screws.
- Il-muntatura tħossha maħlula mal-ħajt: Immediately remove the TV. Re-check all wall plate fasteners. Ensure they are properly anchored into studs or concrete with appropriate hardware. If necessary, consult a professional installer.
- Tilt adjustment is difficult or doesn't hold: Ensure the tilt adjustment knobs are sufficiently loosened before attempting to adjust the angle. After adjustment, tighten them firmly to secure the TV's position. If the mechanism is stiff, ensure no cables are obstructing movement.
9. Garanzija u Appoġġ
For information regarding product warranty, technical support, or replacement parts, please refer to the warranty card included with your product or visit the official Brateck website. Please have your model number (PLB-42-BLK-53) and purchase information ready when contacting support.
