Timken 85MS Bearing User Manual

Introduzzjoni

This manual provides essential information for the proper installation, operation, and maintenance of your Timken 85MS Bearing. Adhering to these guidelines will ensure optimal performance and extend the lifespan of the bearing. The Timken 85MS is a high-quality tapered roller bearing designed for demanding industrial applications, preventing leaks, maintaining pressure, and keeping unwanted matter out at the interfaces of components in most machinery and systems.

Figure 1: Timken 85MS Tapered Roller Bearing. This image displays the bearing, highlighting its robust construction suitable for industrial use.

Setup u Installazzjoni

Proper installation is critical for the performance and longevity of the Timken 85MS Bearing. Follow these steps carefully:

Preparazzjoni: Ensure the shaft and housing seats are clean, free of burrs, and within specified tolerances. Any contaminants or imperfections can lead to premature bearing failure.
Immuntar: The bearing should be mounted using appropriate tools that apply force evenly to the bearing ring being fitted. Avoid striking the bearing directly with a hammer, as this can cause damage. For tapered roller bearings, ensure proper seating of both inner and outer rings.
Lubrikazzjoni: Apply a thin layer of compatible lubricant (grease) to the bearing surfaces before installation to aid in seating and provide initial protection.
Allinjament: Verify that the bearing is correctly aligned within its housing. Misalignment can lead to uneven load distribution and reduced bearing life.
Approvazzjonijiet: Confirm that the correct internal clearances are maintained after installation, as specified by the application requirements.

Linji Gwida Operattivi

To ensure optimal performance and prevent damage, observe the following operating guidelines:

Kapaċità tat-Tagħbija: Do not exceed the bearing's specified dynamic and static load ratings. Overloading can lead to fatigue and premature failure.
Firxa tat-Temperatura: Operate the bearing within its recommended temperature range. Excessive heat can degrade lubricant and bearing materials. Monitor bearing temperature regularly.
Vibrazzjoni u Storbju: Pay attention to unusual vibration or noise during operation. These can be indicators of improper installation, insufficient lubrication, or impending failure.
Kontroll tal-Kontaminazzjoni: Protect the bearing from contaminants such as dust, dirt, and moisture. Effective sealing arrangements are crucial.

Manutenzjoni

Regular maintenance is essential for maximizing the service life of your Timken 85MS Bearing:

Lubrikazzjoni: The Timken 85MS Bearing is compatible with grease. Follow the lubrication schedule recommended for your specific application. Use only high-quality, compatible grease. Over-lubrication or under-lubrication can both be detrimental.
Spezzjoni: Periodically inspect the bearing for signs of wear, corrosion, or damage. Check seals for integrity.
Tindif: If the bearing needs cleaning, use appropriate solvents and ensure all residue is removed before re-lubrication. Avoid high-pressure washing directly on the bearing.
Ħażna: Store spare bearings in their original packaging in a cool, dry, and vibration-free environment to prevent corrosion and damage.

Issolvi l-problemi

If you encounter issues with your Timken 85MS Bearing, consider the following common problems and their potential solutions:

Problema	Kawża Possibbli	Soluzzjoni
Sħana Eċċessiva	Insufficient lubrication, over-lubrication, excessive load, misalignment, incorrect fit.	Check lubrication, reduce load, correct alignment, verify fit.
Storbju/Vibrazzjoni mhux tas-soltu	Contamination, damage, improper installation, insufficient lubrication.	Inspect for contamination/damage, re-install correctly, check lubrication.
Falliment Prematur	Improper installation, inadequate lubrication, overloading, contamination, material defect.	Review installation procedures, ensure proper lubrication, verify load, maintain cleanliness.

Speċifikazzjonijiet

Key specifications for the Timken 85MS Bearing:

Ditta: TIMKEN
Numru tal-Mudell: 85MS
Tip ta' Bearing: Tapered Roller Bearing
Lubrikant Kompatibbli: Griż
Piż tal-oġġett: 1.7 Liri (madwar 0.77 kg)
Dimensjonijiet tal-pakkett: 4.6 x 3.91 x 2.08 pulzieri (madwar 11.68 x 9.93 x 5.28 ċm)
Manifattur: Timken
UPC: 053893406893, 087796065192

Garanzija u Appoġġ

For detailed warranty information regarding your Timken 85MS Bearing, please refer to the official Timken website or contact your authorized Timken dealer. Warranty terms and conditions may vary based on region and purchase agreement.

If you require technical assistance or have questions not covered in this manual, please contact Timken customer support through their official channels. Always provide your product model number (85MS) when seeking support.

Għal aktar informazzjoni, żur l-uffiċjal Timken websit.

	Manwal tal-Inġinerija ta' Timken: Gwida Komprensiva għall-Għażla u l-Applikazzjoni tal-Bearings Dan il-Manwal tal-Inġinerija ta' Timken jipprovdi informazzjoni dettaljata dwar it-tipi ta' berings, il-proċessi tal-għażla, il-prattiki tat-twaħħil, il-kundizzjonijiet tat-tħaddim, il-lubrikazzjoni, u l-ħażna. Riżors essenzjali għall-inġiniera u l-professjonisti fit-trażmissjoni tal-enerġija mekkanika.
	Gwida għall-Ispeċifikazzjoni tal-Bearings Timken: Katalogu Komprensiv għal Applikazzjonijiet Awtomobbli u Industrijali Il-Gwida uffiċjali tal-Ispeċifikazzjoni tal-Bearings ta' Timken tipprovdi informazzjoni dettaljata dwar firxa wiesgħa ta' bearings, siġilli, u assemblaġġi ta' hubs. Essenzjali għall-identifikazzjoni u l-għażla tal-komponenti korretti għal applikazzjonijiet awtomotivi u industrijali.
	Katalogu tal-Blokkijiet Plummer Timken® SNT: Soluzzjonijiet tal-Bearings Industrijali Esplora l-Katalgu tal-Blokkijiet Plummer Timken® SNT, li fih soluzzjonijiet robusti ta' berings industrijali. Skopri speċifikazzjonijiet dettaljati, gwidi tal-installazzjoni, u informazzjoni dwar l-applikazzjoni għal berings ta' prestazzjoni għolja ddisinjati għal ambjenti impenjattivi.
	Katalgu u Gwida Teknika tal-Unitajiet Timken SAF Split-Block Housed Esplora l-Katalgu tal-Unitajiet Timken SAF Split-Block Housed, li fih speċifikazzjonijiet dettaljati, dejta tal-inġinerija, struzzjonijiet tal-immuntar, u gwidi tal-lubrikazzjoni għal berings sferiċi tar-rombli ta' kapaċità għolja. Essenzjali għal applikazzjonijiet industrijali.
	Katalgu tal-Bearings tar-Rombli Sferiċi Timken® SAF Immuntati fuq Blokk Maqsum Katalogu komprensiv li jagħti dettalji dwar il-Boxxli Sferiċi tar-Rombli Timken® SAF Immuntati fuq Blokk Split, inklużi speċifikazzjonijiet tal-inġinerija, struzzjonijiet tal-immuntar, linji gwida tal-lubrikazzjoni, u dimensjonijiet tal-prodott għal diversi serje u applikazzjonijiet.
	Katalgu tal-Bearings tar-Rombli Sferiċi Timken: Inġinerija, Applikazzjonijiet, u Speċifikazzjonijiet Dan il-Katalgu tal-Bearings Sferiċi tar-Rombli ta' Timken jipprovdi informazzjoni dettaljata dwar l-inġinerija, speċifikazzjonijiet tal-prodott, applikazzjonijiet tipiċi, u linji gwida dwar l-immaniġġjar tal-bearings industrijali. Skopri soluzzjonijiet għal tagħbijiet tqal u ambjenti ħorox, inklużi tipi ta' bearings, prattiki ta' installazzjoni, u pariri dwar il-lubrikazzjoni.

TIMKEN 85MS