Introduzzjoni
This manual provides essential information for the safe and effective use of the Eaton BR250 2" 50 Amp Double Pole Interchangeable Circuit Breaker. This device is designed to protect electrical circuits from overcurrents and short circuits, ensuring the safety of your electrical system and connected appliances. Please read this manual thoroughly before installation or operation.
Immaġni: Naħa ta' quddiem view of the Eaton BR250 circuit breaker, showing the 'On/I' and 'Off/O' labels, '50' amp rating, and Eaton branding.
Informazzjoni dwar is-Sigurtà
TWISSIJA: Electrical work can be hazardous. Improper installation or maintenance can result in serious injury or death. Always consult a qualified electrician for installation and service. Ensure power is disconnected at the main service panel before performing any work on electrical circuits.
- Always turn off the main power supply at the circuit breaker panel before installing, removing, or servicing circuit breakers.
- Uża tagħmir protettiv personali (PPE) xieraq, bħal ingwanti iżolati u nuċċalijiet tas-sigurtà.
- Verify that the circuit breaker rating (amperage u voltage) matches the requirements of the circuit and load it will protect.
- Do not use damaged or modified circuit breakers.
- Kun żgur li l-konnessjonijiet kollha huma ssikkati u siguri biex tevita li jisħnu żżejjed.
Setup u Installazzjoni
The Eaton BR250 is a plug-in mount, double-pole circuit breaker designed for use in compatible Eaton BR series load centers. Professional installation by a licensed electrician is highly recommended.
- Skonnettjar tal-Enerġija: Locate the main service panel and turn off the main breaker to completely de-energize the panel. Verify power is off using a voltagtester.
- Aċċess għall-Panel: Neħħi bir-reqqa l-għatu tal-pannell elettriku.
- Pożizzjonament tal-Breaker: Identify an available space in the load center for a 2-inch double-pole breaker. The BR250 is designed to plug directly onto the bus bar.
- Wiring:
- Connect the two hot wires (typically black and red for 240V circuits) to the screw terminals on the circuit breaker. Ensure the wires are stripped to the correct length and inserted fully into the terminals.
- Tighten the terminal screws to the specified torque. Refer to the breaker's label for torque specifications.
- Connect the neutral wire to the neutral bus bar and the ground wire to the ground bus bar in the panel.
- Immuntar: Align the circuit breaker with the bus bar and firmly push it into place until it is securely seated.
- Assemblaġġ mill-ġdid tal-Panel: Replace the panel cover, ensuring all wires are clear and not pinched.
- Restawr tal-Enerġija: Erġa 'aqleb il-breaker prinċipali.
Immaġni: Close-up view of the Eaton BR250 circuit breaker's terminal screws, where electrical wires are connected.
Immaġni: Quddiem view of the Eaton BR250 circuit breaker, displaying technical specifications such as Type BR250, C250, 120/240V, Cu/Al #6 Max. Wire, HACR Type, 2 Pole, J-969, E7819-T, LR43556 Disj., and UL Listed mark.
Istruzzjonijiet Operattivi
The Eaton BR250 circuit breaker features a simple toggle switch for operation.
- Biex Tixgħel: Push the toggle handle firmly to the "ON/I" position.
- Biex titfi: Push the toggle handle firmly to the "OFF/O" position.
- Interruttur li qabad: If an overcurrent or short circuit occurs, the breaker will automatically trip to the center position (between ON and OFF). To reset a tripped breaker, first push the handle completely to the "OFF/O" position, then push it to the "ON/I" position. If the breaker immediately trips again, there is still a fault in the circuit that needs to be addressed by a qualified electrician.
Manutenzjoni
Is-circuit breakers ġeneralment jeħtieġu manutenzjoni minima. Madankollu, spezzjoni perjodika hija rakkomandata biex tiżgura tħaddim sikur kontinwu.
- Spezzjoni Viżwali: Annually, with the main power off, visually inspect the circuit breaker for any signs of damage, discoloration, or loose connections.
- Indafa tal-Panel: Keep the electrical panel area clean and free from dust, debris, and obstructions.
- Kontroll Professjonali: Ikkunsidra li jkollok elettriċista kwalifikat jispezzjona l-pannell elettriku u s-circuit breakers tiegħek kull ftit snin.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Is-circuit breaker jitlaq ta' spiss. | Ċirkwit mgħobbi żżejjed, short circuit, ħsara fl-art, jew apparat difettuż. | Unplug appliances from the circuit. Reset the breaker. If it trips again, consult an electrician. |
| L-interruttur ma jerġax jiġi ssettjat. | Persistent fault in the circuit or a damaged breaker. | Ensure the handle is pushed fully to the OFF position before attempting to reset. If it still won't reset, do not force it; contact an electrician. |
| No power to circuit after resetting breaker. | Main breaker tripped, loose wiring, or internal breaker failure. | Check the main breaker. If it's on, contact a qualified electrician for diagnosis. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Eaton |
| Isem tal-Mudell | Eaton BR250 2" 50 Amp Double Pole Interchangeable Circuit Breaker |
| Numru tal-Parti | BR250 |
| Klassifikazzjoni kurrenti | 50 Amps |
| Voltage | 240 Volts |
| Numru Ta' Poli | 2 |
| Tip ta 'Circuit Breaker | Standard |
| Tip ta 'Immuntar | Plug-In Mount |
| Materjal | Plastik |
| Dimensjonijiet tal-oġġett (LxWxH) | 15 x 1 x 3 pulzieri |
| UPC | 0786676363051 |
Immaġni: Taħt view of the Eaton BR250 circuit breaker, displaying the current interrupting rating of 10,000 Amps and torque specifications for wire connections.
Immaġni: Wara view of the Eaton BR250 circuit breaker, showing a barcode with UPC 0786676363051 and a label indicating it was 'Assembled in Dominican Republic'.
Informazzjoni dwar Garanzija
Eaton products are typically covered by a manufacturer's warranty. For specific warranty terms and conditions applicable to your BR250 circuit breaker, please refer to the documentation included with your purchase or visit the official Eaton website. Warranty details may vary by region and product type.
Appoġġ għall-Klijent
For technical assistance, product inquiries, or to locate a service provider, please contact Eaton customer support directly. You can find contact information and additional resources on the official Eaton websit: www.eaton.com.
