Manwal ta' Istruzzjoni tas-Sensor tal-Livell tal-Fjuwil Dorman 911-006

Introduzzjoni

This manual provides essential information for the installation, operation, and maintenance of the Dorman 911-006 Fuel Level Sensor. This sensor is designed as a direct replacement for the original equipment on specified vehicles, ensuring accurate fuel level readings. Please read this manual thoroughly before proceeding with installation or troubleshooting.

Prodott Overview

The Dorman 911-006 Fuel Level Sensor is engineered to match the fit and function of the original sensor. It is constructed from quality components to ensure reliable performance and extended service life.

X'hemm fil-Kaxxa

Senser tal-Livell tal-Karburant
Float and Arm
Delivery Module Gasket
Tabs tal-qfil tal-Konnettur

Dorman 911-006 Fuel Level Sensor components including the sensor unit with float arm, two rubber gaskets, and an electrical connector. — This image displays all components included with the Dorman 911-006 Fuel Level Sensor: the main sensor unit with its float arm, two different sized rubber gaskets for sealing, and a separate electrical connector with locking tabs.

Kompatibbiltà tal-Vettura

This Dorman 911-006 Fuel Level Sensor is compatible with the following vehicle models. Always verify fitment using your vehicle's make, model, and trim level before installation.

Chevrolet Cavalier: 2000, 2001, 2002, 2003, 2004, 2005
Chevrolet Classic: 2004, 2005
Chevrolet Malibu: 2000, 2001, 2002, 2003
Oldsmobile Alero: 2000, 2001, 2002, 2003, 2004
Pontiac Grand Am: 2000, 2001, 2002, 2003, 2004, 2005
Pontiac Sunfire: 2000, 2001, 2002, 2003, 2004, 2005

Setup u Installazzjoni

Installation of a fuel level sensor typically involves working with the vehicle's fuel system. Due to the complexity and safety considerations, professional installation by a qualified technician is highly recommended.

General Installation Guidelines (Consult Service Manual for Specifics)

Kun żgur li l-batterija tal-vettura hija skonnettjata biex tevita perikli elettriċi.
Safely relieve fuel system pressure according to vehicle manufacturer specifications.
Access the fuel tank. This may require lowering the fuel tank or accessing it from under the rear seat, depending on the vehicle model.
Disconnect the electrical connector from the old fuel level sensor.
Carefully remove the old sensor and gasket. Be prepared for residual fuel and have appropriate containment ready.
Install the new Dorman 911-006 Fuel Level Sensor with the provided new gasket, ensuring a proper seal to prevent leaks.
Connect the electrical connector securely to the new sensor.

Close-up view of the electrical connector for the Dorman 911-006 Fuel Level Sensor. — Din l-immaġni turi dettaljata view of the multi-pin electrical connector, which is crucial for transmitting fuel level data from the sensor to the vehicle's gauge.

Reassemble any removed components and reconnect the vehicle's battery.
Check for fuel leaks and verify proper operation of the fuel gauge by cycling the ignition and observing the fuel level indication.

Important Safety Note: Working with fuel systems can be dangerous. Ensure adequate ventilation and have a fire extinguisher readily available. Avoid sparks or open flames during the installation process.

Operazzjoni

The Dorman 911-006 Fuel Level Sensor operates by using a float mechanism that moves with the fuel level in the tank. This movement is translated into an electrical signal, which is then sent to the vehicle's fuel gauge, providing an accurate indication of the remaining fuel. There is no direct user interaction required for the operation of the sensor itself once installed.

Manutenzjoni

The Dorman 911-006 Fuel Level Sensor is designed for long-term, maintenance-free operation. Regular maintenance is generally not required for the sensor itself. However, ensuring the fuel system remains free of contaminants can help prolong the life and accuracy of all fuel system components, including the sensor.

Use clean, high-quality fuel.
Adhere to vehicle manufacturer's recommended fuel filter replacement intervals.

Issolvi l-problemi

If you experience issues with your fuel gauge after installing the Dorman 911-006 Fuel Level Sensor, consider the following:

Kwistjonijiet Komuni u Soluzzjonijiet:

Inaccurate Fuel Readings (e.g., always full, always empty, erratic):
- Check electrical connections: Ensure the sensor's electrical connector is fully seated and free of corrosion.
- Verify float arm movement: If accessible, confirm the float arm moves freely within the fuel tank without obstruction.
- Inspect for damage: Check the sensor and float arm for any physical damage that might impede its function.
- Consult vehicle service manual: There might be specific diagnostic procedures for your vehicle's fuel gauge system.
Tnixxijiet tal-Fjuwil Wara l-Installazzjoni:
- Re-check gasket installation: Ensure the new gasket is correctly seated and not pinched.
- Verify locking ring/fasteners: Confirm the fuel pump module or sensor assembly is securely fastened to the tank.

If problems persist, it is recommended to consult a certified automotive technician for diagnosis and repair.

Speċifikazzjonijiet

Karatteristika	Dettall
Brand	Dorman
Mudell	911-006
Piż tal-oġġett	4.8 uqija
Dimensjonijiet tal-Prodott	9 x 4.6 x 3.2 pulzieri
Materjal	Plastik
Preċiżjoni tal-Kejl	±2%
Tip ta 'Immuntar	Immonta fuq il-Panew
Tip ta' Output	Imbotta-Iġbed
Klassifikazzjoni tat-Temperatura Għolja	120 Grad Celsius
Numri tal-Partijiet OEM	5S12765; SK1153; SU14178; 22709333; 88966972

Garanzija u Appoġġ

Dorman products are backed by over a century of automotive experience and a commitment to quality. For specific warranty information or technical support, please refer to the official Dorman website or contact Dorman customer service directly.

You can find more information about Dorman products and support at their official store: Ħanut Dorman fuq Amazon.

	Istruzzjonijiet għall-Installazzjoni u t-Tneħħija tal-Mutur tal-Lift tat-Tieqa Dorman 742-119 Gwida pass pass għat-tneħħija u l-installazzjoni tad-Dorman 742-119 Window Lift Motor għal vetturi Chevrolet Venture, Montana, Oldsmobile Silhouette, u Pontiac Trans Sport.
	Istruzzjonijiet għall-Installazzjoni u t-Tneħħija taċ-Ċilindru tas-Serratura tal-Ignizzjoni Dorman 926-059 Detailed instructions for the removal and installation of the Dorman 926-059 Ignition Lock Cylinder, compatible with select Buick, Cadillac, Chevrolet, GMC, Isuzu, Oldsmobile, and Pontiac models. Includes safety precautions and step-by-step guides.
	Gwida għall-Installazzjoni u t-Tneħħija taċ-Ċilindru tas-Serratura tal-Ignizzjoni Dorman 924-790 Istruzzjonijiet pass pass għall-installazzjoni u t-tneħħija taċ-Ċilindru tas-Serratura tal-Ignizzjoni Dorman 924-790. Din il-gwida tkopri l-mudelli kompatibbli ta' Buick, Cadillac, Chevrolet, GMC, Jeep, Oldsmobile, u Pontiac, u tipprovdi proċeduri dettaljati, pariri tekniċi, u prekawzjonijiet ta' sigurtà.
	Ċilindru Prinċipali tal-Brejk Dorman M39576: Istruzzjonijiet għall-Installazzjoni u t-Tneħħija tad-Drenaġġ Istruzzjonijiet dettaljati għall-ibbliċjar tal-bank tat-test u l-installazzjoni taċ-Ċilindru Prinċipali tal-Brejk Dorman M39576, inklużi twissijiet importanti u pariri tekniċi għal vetturi Chevrolet u Pontiac.
	Katalgu tal-Ħardwer tal-Karozzi Dorman: Qafliet u Komponenti Komprensivi Esplora l-Katalgu tal-Ħardwer tal-Karozzi ta' Dorman, li fih firxa wiesgħa ta' qfieli, skorfini, boltijiet, molol, u trejs teknoloġiċi speċjalizzati għat-tiswija u l-manutenzjoni tal-karozzi. Sib in-numri tal-partijiet u l-applikazzjonijiet għal inventarju u servizz effiċjenti.
	Istruzzjonijiet għall-Installazzjoni u t-Tneħħija tal-Manku tal-Bieb Intern taċ-Chevrolet Silverado Istruzzjonijiet dettaljati għall-installazzjoni u t-tneħħija tal-kit tal-manku tal-bieba ta' ġewwa għall-mudelli Chevrolet Silverado, inkluża l-lista tal-partijiet u l-għodda meħtieġa.

Dorman 911-006