1. Introduzzjoni
This manual provides comprehensive instructions for the proper use, setup, maintenance, and troubleshooting of your David Clark H10-36 Helicopter Headset. Designed for pilots, this headset offers excellent performance and comfort, featuring a 5-foot coil cord and a single U-174/U plug for helicopter radios. Please read this manual thoroughly before operating the headset to ensure optimal performance and longevity.
2. Prodott Aktarview
The David Clark H10-36 Helicopter Headset is engineered for clear communication and hearing protection in aviation environments. Key components include:
- Tazzi tal-widnejn: Designed for passive noise attenuation and comfort.
- Faxxa tar-ras: Adjustable for a secure and comfortable fit. Features a padded cushion for extended wear.
- Boom tal-Mikrofonu: Flexible arm holding the noise-canceling microphone.
- Mikrofonu: Electret noise-canceling microphone for clear voice transmission.
- Coil Cord: Durable 5-foot coiled cable for flexibility and reach.
- U-174/U Plug: Single plug connector for helicopter radio systems.
Figure 2.1: David Clark H10-36 Helicopter Headset. This image shows the full headset, including the ear cups, adjustable headband with padding, flexible microphone boom, and the coiled cord with its connector.
3. Setup
Follow these steps to properly set up your H10-36 headset:
- Aġġusta Headband: Extend or retract the headband slides on both sides to ensure the ear cups fit comfortably over your ears. The top of the headband should rest gently on your head.
- Position Ear Cups: Ensure the ear cups fully enclose your ears, creating a good seal. This is crucial for effective noise attenuation. Adjust the angle of the ear cups if necessary.
- Pożizzjoni tal-Mikrofonu: Bend the flexible microphone boom to position the microphone approximately 1/4 to 1/2 inch (0.6 to 1.3 cm) from your lips. Ensure the microphone is directly in front of your mouth for optimal voice pickup and noise cancellation.
- Qabbad ma' l-Ajruplani: Insert the single U-174/U plug firmly into the corresponding jack in the aircraft's intercom or radio system. Ensure a secure connection to prevent audio interruptions.
4. Istruzzjonijiet Operattivi
Once set up, operating the H10-36 is straightforward:
- Komunikazzjoni: Speak clearly and directly into the microphone. The noise-canceling feature will help filter out ambient cockpit noise.
- Smigħ: Audio from the aircraft's intercom or radio will be heard through both ear cups. Adjust the aircraft's audio panel volume as needed.
- Protezzjoni tas-Smigħ: The headset provides passive noise attenuation. Ensure a proper seal around your ears for maximum protection against loud cockpit environments.
5. Manutenzjoni
Regular maintenance will extend the life and performance of your headset:
- Tindif:
- Wipe the ear cups and headband with a soft, damp drapp. Tużax kimiċi ħarxa jew tindif li joborxu.
- Clean the microphone windscreen periodically to remove debris.
- Ħażna: Store the headset in a clean, dry place, away from direct sunlight and extreme temperatures. Avoid coiling the cord too tightly.
- Ear Seals: Inspect ear seals regularly for cracks or hardening. Replace them if they show signs of wear to maintain optimal comfort and noise attenuation. Replacement ear seals are available from authorized David Clark dealers.
- Windskrin tal-mikrofonu: Ensure the microphone windscreen is intact. Replace if damaged to maintain clear communication.
6 Issolvi l-problemi
If you encounter issues with your H10-36 headset, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| No audio in ear cups | Loose connection; Aircraft audio panel off/low; Headset malfunction. | Ensure plug is fully inserted. Check aircraft audio panel volume and settings. Test headset on another aircraft or with a known good intercom. |
| Cannot transmit (microphone not working) | Microphone not positioned correctly; Loose connection; Aircraft PTT (Push-to-Talk) issue; Microphone malfunction. | Reposition microphone closer to lips. Check plug connection. Verify aircraft PTT button functionality. Test microphone on another system. |
| Ħoss fl-isfond eċċessiv | Poor ear seal; Microphone not positioned correctly; Damaged ear seals or windscreen. | Adjust headset for a tighter ear seal. Reposition microphone. Inspect and replace worn ear seals or microphone windscreen. |
If problems persist after attempting these solutions, contact David Clark customer support or an authorized service center.
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Isem tal-Mudell | Over the Head Helicopter Headset |
| Kontroll tal-Ħoss | Kanċellazzjoni Attiva tal-Ħoss |
| Fattur tal-Formola | Fuq Widnejn |
| Kulur | Aħdar |
| Brand | David Clark |
| Teknoloġija tal-Konnettività | Bil-fili |
| Materjal | Fowm |
| Karatteristika tal-Cable | Retractable (Coil Cord) |
| Numru tal-Mudell tal-Oġġett | H10-36 |
| Input tal-Interface tal-Bniedem | Mikrofonu |
| Karatteristiċi Speċjali | Ħfief |
8. Garanzija u Appoġġ
For warranty information and customer support, please refer to the official David Clark Company webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.
David Clark Company LLC
www.davidclark.com
For service or technical assistance, please contact an authorized David Clark service center.
